• Journal of Applied Biological Chemistry
• /
• v.44 no.2
• /
• pp.65-70
• /
• 2001

Ethanol extracts of 38 vegetables were subjected to an in vitro screening for their growth-inhibitory activities towards Bifidobacterium bifidum, B. longum, Clostridium perfringens, Lactobacillus acidophilus, L. casei, and Escherichia coli using paper disc agar diffusion methods under anaerobic conditions. The responses varied with both bacterial strain and vegetable species. In a test with 20 mg/disc, Zingiber officinale extracts showed significant growth-inhibitory responses against B. bifidum, and strong inhibitions against L. casei were detected in the extracts of Chrysanthemum coronarium var. spatiosum and Lactuca sativa. The extracts of Allium sativum, Capsicum annuum, L. esculentum, L. esculentum var. cerasiforme, and Z. officinale showed strong inhibitory activities against C. perfringens, while moderate growth-inhibitory responses were observed in the extracts of C. ffutescens, Cucurbita moschata, Daucus carota var. sativa, and Rubus coreanus. However, all vegetable extracts showed no inhibitions against B. longum, L. acidophilus, and E. coli. In tests with 5 mg/disc, moderate inhibitions were observed in the extracts of C. coronarium var. spatiosum and L. sativa against L. casei and Z. officinale against B. bifidum. Vegetables extracts, except for C. coronarium var. spatiosum, L. sativa, and Z. officinale, did not affect the growth of beneficial bacteria. Strong inhibitory responses against C. perfringens were detected in the extracts of C. annuum and L. esculentum var. cerasiforme. Daily intake of vegetables may be important in the prevention of human diseases caused by the intestinal bacteria.

• Journal of Conservation Science
• /
• v.23
• /
• pp.95-102
• /
• 2008

To investigate bioactive materials for development of natural conservative agent on organic cultural heritage, methanol extracts from 11 wood species which populate in Korea were screened for antifungal and insecticidal activity against 9 wood contaminant fungi and adult of Lasioderma serricorne. Antifungal activity of extracts was tested by using paper disc soaking method and feeder strip test against wood-rot fungi and wood surface contaminant fungi. Among these extracts, the most significant antimicrobial activity was observed from the extract of Phellodendron amurense at 5 mg/disc against Coniophora puteana, Lentinus lepideus, Tyromyces palustris and Aspergillus niger. The insecticidal activity of extracts was examined by topical application against L. serricorne adults. The extracts from Taxus cuspidata and Abies holophylla gave 56.7 % mortality at 25 ${\mu}g$/adult for 24 hr. From these result, the methanol extract from T. cuspidata, A. holophylla and P. amurense described could be useful for conservation of organic cultural heritage against biological deterioration by insect and wood contaminant fungi.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.3
• /
• pp.267-272
• /
• 2011

The behavior of abrasive wear on counterpart roughness of glass fiber reinforcement polyurethane resin (GF/PUR) composites were investigated at ambient temperature by pin-on-disc friction test. The friction coefficient, cumulative wear volume and surface roughness of these materials against SiC abrasive paper were determined experimentally. The major failure mechanisms were lapping layers, ploughing, delamination, deformation of resin and cracking by scanning electric microscopy (SEM) photograph of the tested surface. As increasing the counterpart roughness the GF/PUR composites indicated higher friction coefficient. The surface roughness of the GF/PUR composites was increased as the sliding velocity was higher and the counterpart roughness was rougher in wear test.

• Journal of Korea Multimedia Society
• /
• v.10 no.12
• /
• pp.1585-1590
• /
• 2007

This paper introduces adaptive PRML (Partial Response Maximum Likelihood) architecture with PR (a,b,c,d,e) channel type for the improved readability of high-density optical discs with capacity greater than 30GB. The proposed PRML architecture consists of an adaptive equalizer, a Viterbi detector and a channel identifier. Detailed description for each component is included. The architecture is implemented in chip and also confirmed its performance on the test board mounting the chip. Test results show that the proposed 5-tap PRML architecture is well operated, and less than $2{\times}10^{-4}$ of BER (Bit Error Rate) is achieved with radial and tangential tilt margin of ${\pm}0.6^{\circ}$ on self-made 30GB BD at 1x speed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.4
• /
• pp.495-502
• /
• 2010

The effect of load and sliding speed on abrasive wear characteristics of glass fiber/polyurethane (GF/PUR) composites were investigated at ambient temperature by pin-on-disc friction test. The friction coefficient, cumulative wear volume and surface roughness of these materials against SiC abrasive paper were determined experimentally. Experimental results showed that the surface roughness of the GF/PUR composites was increased as applied load was higher in wear test. The cumulative wear volume tended to increase nonlinearly with increase of sliding distance and depended on applied load and sliding speed for these composites. It could be verified by scanning electric microscopy (SEM) photograph of surface tested that major failure mechanisms were lapping layers, ploughing, delamination, deformation of resin and cracking.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.5
• /
• pp.1245-1248
• /
• 2006

In order to investigate antibacterial activities of Zedoariae Rhizoma against Streptococcus mutans ATCC27351, paper disc test, minimal inhibitory concentration (MIC) test and pH check were carried out. The 80% ethanol extract of Zedoariae Rhizoma(ZXE) showed significant activity. The MIC of ZXE was 25.0mg/ml.

• Tribology and Lubricants
• /
• v.31 no.4
• /
• pp.183-188
• /
• 2015

This paper presents the experimental effects of lubricant with nanodiamond particles in sliding friction. In order to improve the performance of lubricants many additives are used, such as MoS₂, cadmium chloride, indium, sulfides, and phosphides. These additives are harmful to human health and to the environment, so alternatives are necessary. One such alternative is nanodiamond powder, which has a large surface area. In order to investigate the effect of nanodiamonds in lubricants under sliding friction, they are dispersed in the lubricant at a variety of concentrations (0 wt%, 0.1 wt%, 0.3 wt%, 0.5 wt%, and 1 wt%) using the matrix synthesis method. Friction and wear tests are performed according to the ASTM G99 method using a pin-on-disc tester at room temperature. The specimens used in this experiment are AISI 52100 ball bearings and AISI 1020 steel discs. During the test, lubricant mixed with nanodiamond is supplied constantly to keep the two bodies separated by a lubricant film. To maintain boundary lubrication, the speed is set to 0.18 m/s and a load of 294 N is applied to the disc through the pin. Results are recorded by using workbench software over the test duration of 10 minutes. Experimental results show that when the concentration of nanodiamond increases, the coefficient of friction decreases. However, above a nanodiamond concentration of 0.5 wt%, both the coefficient of friction and wear volume increase. From this experiment, the optimum concentration of nanodiamond showing a minimum coefficient of friction of 0.09 and minimum wear volume of 0.82 nm² was 0.5 wt%.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.655-656
• /
• 2006

A parallel analog Viterbi decoder which decodes PR (1,2,2,1) signal of optical disc has been fabricated into chip. The proposed parallel analog Viterbi decoder implements the functions of the conventional digital Viterbi decoder utilizing the analog parallel processing circuits. In this paper, the analog parallel Viterbi decoding technology is applied for the PR signal. The benefit of analog processing is the low power consumption and the less silicon consumption. The test results of the fabricated chip are reported in this paper.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.80-88
• /
• 2000

The plasma spray technics has known as one of the surface modification methods to improve the mechenical properties or the functional charactristics of materials. This paper has been aimed to investigate the effects of plasma sprayed conditions, such as spray distance and arc power level, on sliding wear properties of plasma sprayed $Al_2$O$_3$-40%TiO$_2$coating layer. The sliding wear test using pin-on-disc type wear machine, has been conducted in several sliding speed for coating layer sparyed under different conditions. The result of this paper is that the wear resistance of plasma sprayed $Al_2$O$_3$-40%TiO$_2$coating layer is fluctuated with tile spray distance and the arc power level. The wear resiatance could be improved with decreasing the spray distance and with increasing the arc power level.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.6
• /
• pp.35-40
• /
• 2008

The effect of counterpart roughness on abrasive wear characteristics of side plate materials of FRP ship, which were composed of glass fiber and unsaturated polyester resin composites, were investigated at ambient temperature by pin-an-disc friction test. The friction coefficient, wear rate and cumulative wear volume of these materials against SiC abrasive paper were determined experimentally. The wear rate of these materials decreased rapidly with sliding distance and then maintained a constant value. It was increased as counterpart roughness was rougher in a wear test. The cumulative wear volume tended to increase nonlinearly with sliding distance and depended on applied load and sliding speed for these composites. It could be verified by SEM photograph of fracture surface that major failure mechanisms were overlapping layers, microcutting, deformation of resin, delamination, and cracking.