• 한국통신학회논문지
• /
• 제41권12호
• /
• pp.1942-1949
• /
• 2016

본 논문은 원반골프에 IoT 개념을 도입하여 스마트마커에 경기결과에 대한 수행경로를 자동으로 저장하고, 이를 데이타베이스화 하여 다양한 서비스를 제공하기 위한 시스템을 구축하고자 한다. 이에 대한 주요기능인 스마트마커의 구성 및 역할을 제안하고 이를 시험제작하여 실제 경기에 적용함으로서 그 효용성을 입증하고자 한다. 스마트마커에서 검출된 위치 및 거리정보등은 각 홀마다 스마트폴에서 수집되며, 스마트폴에서는 이를 내부적으로 보관함과 동시에 웹서버에 전송하여 데이터베이스화 한 후 그 결과를 웹 또는 스마트폰등을 통해 실시간으로 검색할 수 있도록 설계하였다.

• 품질경영학회지
• /
• 제42권4호
• /
• pp.563-578
• /
• 2014

Purpose: The purpose of this paper is integrated tolerance design process by advantages of engineering design and 6 sigma statistical tolerances design. Methods: Integrated tolerance design process can determine the goals by using engineer's experience and clarify tolerance by 6 Sigma statistical methods. Integrated design process can be applied by using non-linear simulations. Results: We applied integrated design process to the optical disc drive spindle motor and get good result. Conclusion: If this method is applied test method in the early stages of development, then Design can be reduced development time and cost.

• 자동차안전학회지
• /
• 제10권3호
• /
• pp.38-44
• /
• 2018

Conventional brake system was used for passenger cars and SUV for a long time. However, the high performance brake system has strongly required because of increase of engine power and customer's favorites etc. In this paper, a new high performance brake system for Europe was proposed. For this system, the high performance caliper and disc were newly developed. The superiorities of the developed high performance brake system were verified via heat capacity, hydraulic stiffness, corrosion and harsh braking mode test. Also, the high performance caliper and disc for the light-weight were applied to AL-Alloy and can obtain the weight reduction effect of 2.9 kg per vehicle. Finally, a developed high performance brake system is expected to be used for realization of the high performance at the same platforms.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.820-825
• /
• 2004

This paper deals with friction-induced vibration of disc brake system under constant friction coefficient. A linear, finite element parameter model to represent the floating caliper disc brake system is proposed. The complex eigenvalues are used to investigate the dynamic stability and in order to verify simulations which are based on the FEM model, the experimental modal test and the dynamometer test are performed. The comparison of experimental and simulation results shows a good agreement and the analysis indicates that mode coupling due to friction force is responsible for disc brake squeal. And squeal type instability is investigated by using the parametric rotor simulation. This indicates parameters which have influence on the propensity of brake squeal. This helped to validate the FEM model and establish confidence in the simulation results. Also they may be useful during real disk brake model.

• 자동차안전학회지
• /
• 제11권1호
• /
• pp.23-29
• /
• 2019

Recently, use of composite materials has been increasing for body structures and chassis parts in the car industry because of weight reduction effect and excellent mechanical thermal characteristics. However, application of composite materials in brake system is very difficult because it is hard to obtain enough brake performance due to low heat storage capacity of the composite materials. In this paper, we will present new carbon ceramic composite disc with high flow characteristic. To obtain this characteristic, new vent structures were designed by using ARIZ method and substance-field model analysis. The flow effect of these vent structures on the brake performance was verified by pugh matrix and cooling test. The test results show improvement of cooling performance up to $30^{\circ}C$. Finally, These results will improve brake the reliability of the brake performance for the high performance vehicles and electric vehicles.

• Corrosion Science and Technology
• /
• 제7권2호
• /
• pp.92-98
• /
• 2008

This paper describes the experiments of the corrosion and the sliding tests of the nickel-based alloys for the gate valve seating materials used at high pressure and temperature. The general corrosion rates and IGC susceptibility are tested in pressurized water at 533 K and 575 K and in Strauss test solution. The sliding tests have been done in pressurized water at 293 k, 473 K and 573 k. The alloys containing above 10% chromium may have the anti-corrosion properties that could be applied to the valve seats for the power plants. The good sliding performance and the good pressure tightness are obtained when the disc specimens that have hardness 500 to 600 Hv combined with the seat specimens that have hardness 250 to 410 Hv containing about 40 percent of iron. The large size gate valves sliding tests have certified the test results. The anti-wear properties of the seat alloy and the anti-IGC susceptibility of the disc alloy could be improved by the addition of silicon and niobium, respectively.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.212-217
• /
• 2004

In general, the braking system of high speed train has an important role for the safety of the train. To stop safely train at its pre-decided position, it is necessary to combine properly the various brakes. The prototype of Korean high speed train (KHST) has been designed, fabricated and tested by the domestic researchers. It has adopted a combined electrical brakes, such as rheostatic brake, regenerative brake and eddy current brake, and mechanical brakes composed of disc brake, wheel disc brake and tread brake. In this paper, the performances and control algorithms of braking system have been reviewed by the experimental method.

• 한국자동차공학회논문집
• /
• 제6권5호
• /
• pp.104-110
• /
• 1998

In automotive industries, various processes for the cost reduction have been investigated lively. As one of them, powder metallurgy becomes influential. Compared to other methods used for he manufacture of steel components the Powder metallurgy process is competitive primarily due to the small number of production steps to reach the final geometry and thereby also the energy-efficiency. In this paper, to alter present forging process into powder metallurgy process by which the automotive clutch disc spline hub is manufactured machining process, the mechanical properties of sintered materials is investigated by specimen test. Selecting the 3 kinds of materials-SMF 4040, SMF 9060 and DHP-1, their properties according to heat treatment such as carburizing -tempering and plasma-nitrodizing are compared. By result of specimen test - tensile test, compression ring test, Impacting test, measurment of hardness, and microstructure analysis - we concluded that SMF 9060 and carburizing-tempering heat treatment is an optimal material and heat treatment method for the spline hub. It will be able to reduce manufacturing cost and weight.

• Journal of the Korean Wood Science and Technology
• /
• 제52권2호
• /
• pp.134-144
• /
• 2024

This study aimed to analyze the anti-termite properties of tamanu (Calophyllum inophyllum L.) stem bark extracts against subterranean termites, specifically, Coptotermes curvignathus. The bark powder of C. inophyllum was extracted using different solvents, such as n-hexane, ethyl acetate, and methanol, using the maceration method. Anti-termite testing was performed using two paper disc methods: no- and two-choice tests. Whatman test paper was dripped with the extract solutions at concentrations of 4%, 6%, 8%, and 10% (w/v). Subsequently, the treated paper disc was placed into an acrylic tube, and the subterranean termite was added. The parameters utilized in the test included termite mortality and the weight loss of the test paper. The results revealed that the total extract yield of C. inophyllum stem bark was 30.24%. Furthermore, the extractive substances from C. inophyllum bark exhibited anti-termite activity. The most favorable outcomes were obtained with the n-hexane and ethyl acetate extracts at a concentration of 10%. The termite mortality and weight loss of the test paper were respectively 66% and 5.67% for the n-hexane extract and 66.67% and 6.19% for the ethyl acetate extract. In addition, the n-hexane extract contained friedelan-3-one, while the ethyl acetate extract contained 1,2-benzene dicarboxylic acid, dinonyl ester, and friedelan-3-one. The results suggested that these compounds are responsible for the observed anti-termite activity.

• 연구논문집
• /
• 통권28호
• /
• pp.229-238
• /
• 1998

비파괴평가의 대상이 되는 소재나 부품은 관련 표준시험편을 이용하여 평가되고, 표준시험편은 평가대상과 동일 또는 유사한 재질로 제작되어야 한다고 규정하고 있다. 따라서 비파괴평가가 요구되는 소재나 부품을 생산, 외국에 수출하기 위해서는 반드시 공인된 설비와 품질관리 체계로부터의 인증이 선행되어야 한다. 본 논문에서는 초음파를 이용한 항공기용 Udimet 720Li 디스크의 비파괴평가를 위하여 ASTM에 규정되어 있는 4340강 초음파 표준시험편의 적용타당성을 제시하였다. 현미경 시험을 통하여 Udimet 720Li 합금의 미세조직을 규명하고, 고출력 초음파 분석시스템을 이용한 펄스의 위상값을 측정하는 방법으로 4340강 표준시험편 및 Udimet 720Li 합금의 초음파 속도와 감쇠값을 구하였다. 결론적으로 4340강 초음파 표준시험편이 Udimet 720Li 디스크의 평가를 위한 표준시험편으로 사용될수 있음을 증명하였다.