• Tribology and Lubricants
• /
• 제36권6호
• /
• pp.350-358
• /
• 2020

Hot stamping is an effective and suitable process widely used in automotive applications, though critical issues such as the transfer of the coating materials and build-up of these materials on tool surfaces have been encountered. Past researches figured out the resultant wear phenomenon using pin-on-disc and drawing (for example, strip drawing and deep drawing) methods to mimic the process and analyzed the wear behavior with respect to the influencing factors such as surface coating, load, and roughness. Although the pin-on-disc is a conventional and widely-used method, it presented a methodological limitation when simulating the hot stamping process by forming a new blank each time, and hence, a drawing-based friction method has been proposed and developed. Each drawing method applies loads in a different way, resulting in a different wear behavior. Notably, the deep drawing process is most similar to the hot stamping process compared to other drawing methods. In this paper we present a review of the friction testing methods mimicking the hot stamping process and the associated wear behavior. This can be helpful in presenting a step-by-step approach and different perspectives on the wear behavior in the hot stamping process.

• 소음진동
• /
• 제11권2호
• /
• pp.315-322
• /
• 2001

This paper is focused on the frictionally induced thermoelastic instability (TEI) in automotive disk brakes. This instability leads to the formation of localized high temperature contact regions known as hot spots. This article investigates the themoelastic instability in automotive disk brake systems consisting of a finite thickness layer (disk) and two half-planes (pads) using a perturbation method. The antisymmetric mode involves hot spots located alternately on two sides of the disk. As a result the circumferentially periodic hot spots produce rotor surface distortion and Induce low frequency vibration. Also the effects of system parameters on the critical speed for TEI are investigated.

• 한국자동차공학회논문집
• /
• 제22권1호
• /
• pp.8-19
• /
• 2014

In this paper, a robust design of the back-plate of the brake pad to decrease the uneven wear of the pad was studied. A finite element analysis was performed to analyze the pressure distributions on the contact surfaces. Optimized back-plate shape of the brake pad was determined using the Taguchi method. The effectiveness of the robust design was clarified by the wear tests with a dynamometer.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.212-217
• /
• 2004

In general, the braking system of high speed train has an important role for the safety of the train. To stop safely train at its pre-decided position, it is necessary to combine properly the various brakes. The prototype of Korean high speed train (KHST) has been designed, fabricated and tested by the domestic researchers. It has adopted a combined electrical brakes, such as rheostatic brake, regenerative brake and eddy current brake, and mechanical brakes composed of disc brake, wheel disc brake and tread brake. In this paper, the performances and control algorithms of braking system have been reviewed by the experimental method.

• Archives of Pharmacal Research
• /
• 제3권1호
• /
• pp.31-36
• /
• 1980

Seeds or beans of 55 plants belonging to 31 families were screened by using several different types of red blood cells to find new lectins. In this paper, white kidney been (phaseolus vulgaris C.) was chosen to study biochemical properties of hemagglutinating proteins(lectins). An anion exchanger, DEAE Sephadex A-50, and polyacrylamide disc gel electrophoresis were main techniques used. From three main fractions eluted by stepwise NaCl gradient in 25mM Tris-HCI buffer on DEAE Sephadex column, principal lectin was identified.

• 통합자연과학논문집
• /
• 제4권1호
• /
• pp.15-22
• /
• 2011

In this study, liquid with carbonized artemisia was developed for the first time that can be used as food additives and outside medicinal agents by burning artemisia species such as Artemisia dubia wall, Artemisia capillaris Thunb, Artemisia montana (Nakai) Pamp), Artemisia keiskeana Miq, Leonurus Japonicus Houtt. etc. In addition, edibility of recovered liquid with carbonized artemisia was verified by comparing the contents according to each ingredient with common refined pyroligneous liquid through the analysis of 9 kinds of organic acid by the species of artemisia, methanol and ethanol. Besides, the result of antimicrobial activities on six kinds of food spoilage and food poisoning bacteria observed by paper disc method for liquid with carbonized artemisia indicated that those two liquids showed strong antimicrobial. At the concentration of 1.5 mg/disc, clear zone for S. sonnei and S. aureus, L. monocytogenes was 13~16 mm, and they showed stronger antimicrobial activities than other strain.

• Journal of Plant Biotechnology
• /
• 제49권4호
• /
• pp.339-346
• /
• 2022

본 연구는 벌나무 에탄올 추출물의 황색포도상구균에 대한 항균 및 항산화 활성을 검증하였다. 총 폴리페놀 및 플라보노이드 함량, DPPH와 ABTS 라디칼 소거효능과 FRAP법을 사용한 환원력을 측정하여 벌나무 에탄올 추출물의 항산화활성을 검증하였고, Paper disc법, MIC 및 MBC법을 통하여 황색포도상구균에 대한 벌나무 에탄올 추출물의 항균 활성을 검증하였다. 총 폴리페놀 및 플라보노이드 함량은 각각 266.66 ㎍ GAE/mg와 6.46 ㎍ QE/mg이었다. DPPH와 ABTS 라디칼 소거능은 농도 의존적 소거능을 보였고, 벌나무 에탄올 추출물의 RC₅₀ 값은 각각 21.49, 12.81 ㎍/mL이었다. 환원력을 평가하기 위해 수행된 FRAP 분석에서 벌나무 추출물은 0.73 ± 0.19 mM FeSO₄ E/mg의 효능을 보여주었다. Paper disc법을 이용한 황색포도상구균에 대한 벌나무 추출물의 항균 활성은 2 mg에서 3 mm의 저해환을 보여주었으며, 최소 저해농도 연구에서는 1 mg/mL 이상의 농도에서 80% 이상의 억제력을 보여주었고, 16 mg/mL 이상의 농도에서 최소저해 농도를 확인할 수 있었다. 또한, 최소살균농도 연구에서는 32 mg/mL에서 최소살균농도를 확인할 수 있었다. 벌나무 추출물을 사용한 항산화 및 황색포도상구균에 대한 항균 활성을 확인한 결과 벌나무 추출물의 아토피피부염에 유효한 물질로서의 가능성을 확인할 수 있었다.

• 한국치위생학회지
• /
• 제18권1호
• /
• pp.9-18
• /
• 2018

Objectives: Pleurotus eryngii is used both for edible and medicinal purposes, and has a physiological activity. The purpose of this study is to investigate the antibacterial effect of Pleurotus eryngii against six oral pathogens (Staphylococcus aureus, Streptococcus criceti, Streptococcus mutans, Streptococcus ratti, Streptococcus sobrinus, and Actinomyces viscosus). Methods: The antibacterial activities of various extracts of Pleurotus eryngii were examined by disc diffusion assay and minimum inhibitory concentration (MIC). The disc diffusion assay was performed by putting a paper disc soaked in extracts on plates inoculated bacterial cultures. The MIC of these extracts was determined by using a broth microdilution assay at a concentration ranging between 0.03 mg/ml to 15.00 mg/ml. The growth inhibition effect of extracts was measured at 600 nm for 24 hrs. Results: The antibacterial activity was confirmed against all six tested bacteria at Pleurotus eryngii ethyl acetate extract by the disc diffusion method. Acetone extract showed the antibacterial activity only against 4 strains containing Streptococcus criceti, Streptococcus mutans, Streptococcus ratti, and Actinomyces viscosus. In ethanol extract, no activity was observed against other strains except Staphylococcus aureus. MIC values of ethyl acetate extract were the same, 7.50 mg/ml in all tested bacteria. Conclusions: Pleurotus eryngii exhibited the antibacterial activity against oral pathogens (Staphylococcus aureus, Streptococcus criceti, Streptococcus mutans, Streptococcus ratti, Streptococcus sobrinus, and Actinomyces viscosus). Thus, Pleurotus eryngii may be considered as a natural antibacterial agent for treatment of dental diseases.

• 한국통신학회논문지
• /
• 제18권10호
• /
• pp.1495-1507
• /
• 1993

본 논문에서 마이크로프로그램 제어방식을 이용하여 CDP(Compact Disc Player)에서 사용되는 RS 부호(Reed-Solomon code)의 복호기를 설계하였다. 사용한 복호방법은 Newton 항등식들로 부터 얻어진 연립방정식들을 이용하여 오류위치다항식의 계수들을 구하고, C2(외부호)복호에서의 소실데이타 개수를 확인한다. 또한 C2복호에서 소실데이타 값들을 C1(내부호)복호 결과와 신드롬들을 이용하여 구한다. 이와 같은 복호방법을 이용하여 4개의 소실정정까지 할 수 있도록 해서 오류정정능력을 높였다. 설계한 복호기는 오류정정에 필요한 GF(28)상에서 연산을 수행할 수 있는 복호연산기와 프로그램 ROM을 가지고있는 복호제어기 띤 마이크로명령어(microinstruction)들로 구성된다. 마이크로명령어들을 이용하여 RS부호의 복호 알고리즘을 프로그램할 수 있으며, 성능향상이나 다른 용도에 사용하기 위해서는 프로그램 ROM만 바꾸면 가능하므로 간편하다. 본 논문에서 설계한 복호기는 Verilog HDL의 Logic Level Modeling을 이용하여 구현했으며, 설계된 복호기에서 각 마이크로명명령어들은 14비트(=1 word)이고, 프로그램 ROM의 크기는 360 word이다. 또한 C1과 C2를 모두 복호하는데 걸리는 최대시간은 424 clock-cycle이다.

• 한국전산유체공학회지
• /
• 제17권1호
• /
• pp.61-69
• /
• 2012

In this paper, the shape design process is briefly discussed emphasizing the use of topology optimization in the conceptual design stage. The basic idea is to view feasible domains for sensitivity region concepts. In this method, the main process consists of two steps: as the design moves further inside the feasible domain using Taguchi method, and thus becoming more successful topology optimization, the sensitivity region becomes larger. In designing a double-eccentric butterfly valve, related to hydrodynamic performance and disc structure, are discussed where the use of topology optimization has proven to dramatically improve an existing design and significantly decrease the development time of a shape design. CFD analysis results demonstrate the validity of this approach.