• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.8-15
• /
• 2007

In this paper, we fabricated the field emitter display using oxidized porous polysilicon(OPPS). Their field emission characteristics and the brightness were investigated for each pixel. The OPPS emitter was operated to each pixel using passive matrix for application of large panel display. We set up the proper thickness and width of upper electrode. The fine structure of OPPS was analyzed and the field emission characteristics of each pixel were investigated. As a result of field emission characteristics of different upper electrode thickness and width, we confirmed that the most efficient thickness was 2nm/7nm and increased the emission efficiency over the width of 2.5 mm. Even if field emission characteristics of each pixel was a little different but we confirmed the same leakage current and emission current, emission efficiency at each pixel. The leakage current and emission current was decreased according to the time increases but all of each pixel were uniformly decreased. We confirmed that the brightness of each pixel was not different and the brightness of OPPS field emitter was 700 cd/m2 at the Vps=20 V. Accordingly, the patterned OPPS field emitter can be applied to high quality field emission display devices.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.3
• /
• pp.261-273
• /
• 2011

Recently, the demands for steel frame are increasing because of the trend and due to the demand for bigger and higher buildings. In the analysis of typical steel frame, connections are based on the idealized fixed or pinned connection. A fixed connection assumes that the relative angle of each member before deformation is the same after the transformation. Therefore, the stiffener reinforces the connection to sufficient rigidity and stability of the panel zone. In the economical aspect, however, the necessity of connection that the stiffener reinforcement has omitted is increasing due to the excessive production as well as labor costs of connection. In contrast, pinned connection is assumed that bending moments between the beams and columns do not transfer to each member. This is easy to make in the plant and the construction is simple. However, the structural efficiency is reduced in pinned connection because connection cannot transfer moments. The introduction of this semirigid process can decide efficient cross-sectional dimensions that promote ease in the course of structural erection, as performed by members in the field-a call for safety in the entire frame. Therefore, foreign countries exert efforts to study the practical behavior and the results are applied to criterion. This paper analyzes the semirigid connection of domestic steel by design specifications of AISC/LRFD and make data bank that pertain to each steel. After wards, the results are compared to those of idealized connection; at the same time, this paper presents a design method that matches economic efficiency, end-fixity, and rotational stiffness.

• Korean Journal of Social Welfare
• /
• v.59 no.3
• /
• pp.147-174
• /
• 2007

This study examines how path dependency of working poor labor market segmented from the primary and the secondary labor market affects employment and quality of employment of working poor. It Further examines how path dependency makes working poor to remain in the labor market and makes it difficult for them to escape from a vicious poverty cycle. Data is based on the $3{\sim}7th$ Korea Labor and Income Panel Study(KLIPS). Markov's transition probability and discrete-time hazard analysis are used for analysis. This study finds that Korea labor market is divided into three parts; the primary labor market, the secondary labor market and the working poor labor market. The proportion of employed poor has been reduced, but the proportion of non economically-active working poor has been increased and has become the main group among the working poor. This shows that labor demand of working poor is fundamentally lacking and there are structural barriers that block working poor's employment itself. The regression analysis shows that the longer working poor labor market participation is, the lower poverty-exit rate. This is an evidence of vicious poverty cycle that the poor have little chance to exit from working poor labor market, once they step into it. Therefore, the longer their participation in poor labor market, the more likely they would move only within the closed working poor labor market. Consequently, it is necessary to fundamentally reform labor market structure and to alleviate negative perception and discrimination about the poor labor while activating labor demand.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.10
• /
• pp.1565-1574
• /
• 2018

Objective: The aim of the present study was to identify genetic variants based on RNA-seq data, obtained via transcriptome sequencing of muscle tissue of pigs differing in muscle histological structure, and to verify the variants' effect on histological microstructure and production traits in a larger pig population. Methods: RNA-seq data was used to identify the panel of single nucleotide polymorphisms (SNPs) significantly related with percentage and diameter of each fiber type (I, IIA, IIB). Detected polymorphisms were mapped to quantitative trait loci (QTLs) regions. Next, the association study was performed on 944 animals representing five breeds (Landrace, Large White, Pietrain, Duroc, and native Puławska breed) in order to evaluate the relationship of selected SNPs and histological characteristics, meat quality and carcasses traits. Results: Mapping of detected genetic variants to QTL regions showed that chromosome 14 was the most overrepresented with the identification of four QTLs related to percentage of fiber types I and IIA. The association study performed on a 293 longissimus muscle samples confirmed a significant positive effect of transforming acidic coiled-coil-containing protein 2 (TACC2) polymorphisms on fiber diameter, while SNP within forkhead box O1 (FOXO1) locus was associated with decrease of diameter of fiber types IIA and IIB. Moreover, subsequent general linear model analysis showed significant relationship of FOXO1, delta 4-desaturase, sphingolipid 1 (DEGS1), and troponin T2 (TNNT2) genes with loin 'eye' area, FOXO1 with loin weight, as well as FOXO1 and TACC2 with lean meat percentage. Furthermore, the intramuscular fat content was positively associated (p<0.01) with occurrence of polymorphisms within DEGS1, TNNT2 genes and negatively with occurrence of TACC2 polymorphism. Conclusion: This study's results indicate that the SNP calling analysis based on RNA-seq data can be used to search candidate genes and establish the genetic basis of phenotypic traits. The presented results can be used for future studies evaluating the use of selected SNPs as genetic markers related to muscle histological profile and production traits in pig breeding.

• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.829-844
• /
• 2013

This study performed comprehensive tests on the four hypotheses on the capital structures for the firms listed in the KOSPI during the period from 2006 to 2011. It may be of concern to find any financial profiles on firms' leverage across the book- and market-value bases since there was relatively little attention drawn to any financial changing profile of the leverage surrounding the period of the pre-and the post-global financial crises. The findings of this study may also be compared with those of the previous related literature, by which it may be expected to enhance the robustness and consistency of the results across the different classifications on capital markets. It was found that three explanatory variables such as PFT, SIZE, and RISK, were found to be the statistically significant attributes on leverage during the tested period. Moreover, the outcome by the Fisher Exact test showed that a firm belonging to each corresponding industry may possess its reversion tendency towards the industry mean and median leverage ratios.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.440-453
• /
• 2020

Given the dynamics of the changing economic or financial conditions in Chungcheong province in the domestic capital market, foreign and domestic investments are expected to continually increase their investments in volume and size in this particular province. Considering the unprecedented business climate, it may be essential to examine the primary financial aspects, such as corporate profitability, growth rate, and capital structure, which may work as effective catalysts to enhance corporate value. Concerning the outcomes, five proposed variables, such as market-value based leverage ratio, growth rate, Tobin's Q, business risk, and R&D intensity, highlighted the significant effects to determine the current level of profitability. Moreover, two variables, such as profitability and firm size, shared commonalities to discriminate between firms in the Chungcheong province (96 firms) and their counterparts (746 firms) in the other domestic provinces in terms of the growth rate and financial leverage. In contrast, three variables, including the interaction effect and firm size, had pronounced effects on profitability. The results of the study are expected to help enhance the corporate value in Chungcheong province by controlling the level of each significant factor.

• Journal of Labour Economics
• /
• v.30 no.3
• /
• pp.43-75
• /
• 2007

This study reviews the trend of job separation rates for three years from 2002 to 2005 and investigates the various elements which influence this trend, especially the role of the labor unions, by using Korean Labor Panel data. In the basic statistics, the job retention rate of union members were higher by an average of 28.3% points compared to non-union members, but in the results of controlling the observed variables of individual influences in changing jobs, it was estimated that unions increase the job retention rate by 11% to 13% points. To investigate the effect of unions on the job stability of workers in detail, the non-linear decomposition method developed by Fairlie (2003) was used in the analysis. In examining the difference of job separation rates between union members and non-union members through observed variables of workers in explainable parts and unexplainable parts by using the non-linear decomposition technique, the contribution of the explainable part was estimated to be 67% to 74% and the unexplainable part accounted for the rest which was 26% to 33%. This suggests that not only does the union contribute to the job stability of its members, but the propensity to change jobs for a worker who is a union member is on average lower than that of a worker who is not a union member or who works at an establishment that does not have a union. The results of the empirical analysis show that the job stability effect of labor unions is limited within the boundary of a maximum 7% to 9% points. The reason for the effect of labor unions on job stability being so low is due to various reasons such as collective bargaining structure by company, intensified business competition after the financial crisis, and labor market segmentation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.156-157
• /
• 2012

단일 셀에서 비휘발성 및 고속의 휘발성 메모리를 모두 구동할 수 있는 다기능 메모리는 모바일 기기 및 embedded 장치의 폭발적인 성장에 있어 그 중요성이 커지고 있다. 따라서 최근 이러한 fusion기술을 응용한 unified RAM (URAM)과 같은 다기능 메모리의 연구가 주목 받고 있다. 이러한 다목적 메모리는 주로 silicon on insulator (SOI)기반의 1T-DRAM과 SONOS기술 기반의 비휘발성 메모리의 조합으로 이루어진다. 하지만 이런 다기능 메모리는 주로 단결정기반의 SOI wafer 위에서 구현되기 때문에 값이 비싸고 사용범위도 제한되어 있다. 따라서 이러한 다기능메모리를 다결정 실리콘을 이용하여 제작한다면 기판에 자유롭게 메모리 적용이 가능하고 추후 3차원 적층형 소자의 구현도 가능하기 때문에 다결정실리콘 기반의 메모리 구현은 필수적이라고 할 수 있겠다. 본 연구에서는 다결정실리콘을 이용한 channel recessed구조의 다기능메모리를 제작하였으며 각 1T-DRAM 및 NVM동작에 따른 memory 특성을 살펴보았다. 실험에 사용된 기판은 상부 비정질실리콘 100 nm, 매몰산화층 200 nm의 SOI구조의 기판을 이용하였으며 고상결정화 방법을 이용하여 $600^{\circ}C$ 24시간 열처리를 통해 결정화 시켰다. N+ poly Si을 이용하여 source/drain을 제작하였으며 RIE시스템을 이용하여 recessed channel을 형성하였다. 상부 ONO게이트 절연막은 rf sputter를 이용하여 각각 5/10/5 nm 증착하였다. $950^{\circ}C$ N2/O2 분위기에서 30초간 급속열처리를 진행하여 source/drain을 활성화 하였다. 계면상태 개선을 위해 $450^{\circ}C$ 2% H2/N2 분위기에서 30분간 열처리를 진행하였다. 제작된 Poly Si MFM에서 2.3V, 350mV/dec의 문턱전압과 subthreshold swing을 확인할 수 있었다. Nonvolatile memory mode는 FN tunneling, high-speed 1T-DRAM mode에서는 impact ionization을 이용하여 쓰기/소거 작업을 실시하였다. NVM 모드의 경우 약 2V의 memory window를 확보할 수 있었으며 $85^{\circ}C$에서의 retention 측정시에도 10년 후 약 0.9V의 memory window를 확보할 수 있었다. 1T-DRAM 모드의 경우에는 약 $30{\mu}s$의 retention과 $5{\mu}A$의 sensing margin을 확보할 수 있었다. 차후 engineered tunnel barrier기술이나 엑시머레이저를 이용한 결정화 방법을 적용한다면 device의 특성향상을 기대할 수 있을 것이다. 본 논문에서는 다결정실리콘을 이용한 다기능메모리를 제작 및 메모리 특성을 평가하였다. 제작된 소자의 단일 셀 내에서 NVM동작과 1T-DRAM동작이 모두 가능한 것을 확인할 수 있었다. 다결정실리콘의 특성상 단결정 SOI기반의 다기능 메모리에 비해 낮은 특성을 보여주었으나 이는 결정화방법, high-k절연막 적용 및 engineered tunnel barrier를 적용함으로써 해결 가능하다고 생각된다. 또한 sputter를 이용하여 저온증착된 O/N/O layer에서의 P/E특성을 확인함으로써 glass위에서의 MFM구현의 가능성도 확인할 수 있었으며, 차후 system on panel (SOP)적용도 가능할 것이라고 생각된다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.230-238
• /
• 2014

In this paper, we propose the possible way of accurate analysis and examination of ITO sensor to discriminate whether mutual capacitance ITO sensor is defective by using mutual capacitance of data in each node which consists of electrodes inside of ITO sensor. We have analyzed the structure characteristic of mutual capacitance ITO sensor which is used as an input device for not only small size electronics like mobile phone and tablets but also big size electronics and designed the circuit to inspect ITO sensor using touch screen panel IC. Set a variable related with mutual capacitance of charge and discharge and Implement to find and analyze accurate position when defect is made through the data from each node of ITO sensor. First, we can set a yield effective range through the first experiment data of mutual capacitance ITO sensor and by using the data of each node of ITO sensor which is the result from the second experiment, we can verify accuracy and effectiveness of effective range from the first experiment as a sample which is used in this experiment.

• Journal of agricultural medicine and community health
• /
• v.34 no.2
• /
• pp.188-201
• /
• 2009

Objectives: This study compared the welfare level and leisure activities of children and the youth in urban areas with rural areas, and examined factors affecting their life satisfaction. Methods: The fourth wave of the Youth Panel data collected by the Korea Youth Policy Institute has been utilized. A total of 3,145 sample was drawn, and the average age of the sample was about 17 years old (a sophomore in high-school). T-test and multiple regression has been employed. Results: In almost all welfare related variables including life satisfaction, leisure satisfaction, parent attachment, and relationship with teachers and peers, the rural children and youth showed lower scores than their urban counterparts. The only factor whose score was higher to the rural children and youth was community factor including community attachment and guidance. In terms of leisure (satisfaction) level which was the most influential factor of predicting the variance of life satisfaction, the rural children and youth revealed unfavorable condition, as their accessibility to the facilities was low and there were less facilities in rural areas in the first place. Conclusions: As a way to improve the welfare and cultural level of rural children and youth, this study proposed to make investment to the rural areas by providing them with welfare and leisure infra structure and various welfare and leisure programs. To improve the outdoor leisure activities of the urban children and youth, setting up a sisterhood between urban and rural schools has been suggested.