• Korean Journal of Optics and Photonics
• /
• v.21 no.2
• /
• pp.61-68
• /
• 2010

Optical simulation methods were applied to the edge-lit LED backlight for LCD TV applications in order to optimize the optical structure of the light guide plate(LGP), and thus to improve the uniformity properties by removing the bright spots caused by LED's. The edge-lit LED backlight consisted of three white LED's with a lamp cover, a light guide plate, and a reflection film. When there was no pattern on the entrance side surface of the LGP, the illuminance uniformity was sensitively dependent on the distance d between the LED and the entrance surface. The illuminance uniformity increased with d but its increasing rate slowed down when d was beyond ~ 1.5 mm. When micro-patterns such as a lenticular lens array (LLA) or a serration pattern were formed on the entrance surface, the illuminance uniformity was improved substantially even for the case of very small d. At the same simulation condition, the lightguide with serration pattern showed a better uniformity than that with LLA pattern. Additional improvement could be achieved by changing the refractive index of the micro-patterns. These results suggest that using micro-patterns is a very effective way to reduce the bright spots due to their refracting function for the concentrated incident rays onto the LGP.

• Korean Journal of Social Welfare
• /
• v.68 no.3
• /
• pp.5-27
• /
• 2016

In this study, we examine differences in the children's medical utilization by family structure with a focus on single-mother and single-father families using data from the Korean Health Panel Survey, years 2008~2012. We also investigate whether the cause of transition into a single-parent household, whether coresidence with children's grandparents, and number of siblings are associated with children's use of ambulatory visits. The main findings of this study are as follows. First, children who grew up in single-father households had fewer ambulatory visits compared to those living with both parents after controlling for children's demographic characteristics and family backgrounds. Second, coresidence with grandparents was not associated with children's medical utilization. However, number of siblings was significantly and negatively correlated with the use of ambulatory visits. Third, children living with a divorced father had fewer medical utilization compared to those living with a widowed father, and coresidence with grandparents was positively associated with children's use of ambulatory visits. Our findings suggest that tailored policy supports would be more fruitful based on characteristics of single-parent households such as gender of parents, and the supports should also pay more attention to health care needs and medical utilization of children.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.5
• /
• pp.285-295
• /
• 1999

Electroluminescent(EL) devices based on organic materials have been of great interest due to their possible applications for large-area flat-panel displays. They are attractive because of their capability of multi-color emission, and low operation voltage. An approach to realize such device characteristics is to use active layers of lanthanide complexes with their inherent extremely sharp emission bands in stead of commonly known organic dyes. In general, organic molecular compounds show emission due to their $\pi$-$\pi*$ transitions resulting in luminescence bandwidths of about 80 to 100nm. Spin statistic estimations lead to an internal quantum efficiency of dye-based EL devices limited to 25%. On the contrary, the fluorescence of lanthanide complexes is based on an intramolecular energy transfer from the triplet of the organic ligand to the 4f energy states of the ion. Therefore, theoretical internal quantum efficiency is principally not limited. In this study, Powders of TPD, $Eu(TTA)_3(phen) and AlQ_3$ in a boat were subsequently heated to their sublimation temperatures to obtain the growth rates of 0.2~0.3nm/s. Organic electrolumnescent devices(OELD) with a structure of $glass substrate/ITO/Eu(TTA)_3(phen)/AI, glass substrate/ITO/TPD/Eu(TTA)_3(phen)/AI and glass substrate/ITO/TPD/Eu(TTA)_3(phen)/AIQ_3AI$ structures were fabricated by vacuum evaporation method, where aromatic diamine(TPD) was used as a hole transporting material, $Eu(TTA)_3(phen)$ as an emitting material, and Tris(8-hydroxyquinoline)Aluminum$(AlQ_3)$ as an electron transporting layer. Electroluminescent(EL) and current density-voltage(J-V) characteristics of these OELDs with various thickness of $Eu(TTA)_3(phen)$ layer were investigated. The triple-layer structure devices show the red EL spectrum at the wavelength of 613nm, which is almost the same as the photoluminescent(PL) spectrum of $Eu(TTA)_3(phen)$.It was found from the J-V characteristics of these devices that the current density is not dependent on the applied field, but on the electric field.

• Journal of Distribution Science
• /
• v.14 no.4
• /
• pp.103-110
• /
• 2016

Purpose - This study investigates the improvement of rationalization of distribution structure in Korean diamond market. It also explores the international distribution of diamond and how the distribution of Korean diamond market system was improved. This study also for providing the evaluation method in case of purchasing diamond on the consumers. Research Design, Data, and Methodology - The research investigates how international diamond distribution market has been changed since 1933 by De Beers. The international Diamond rough stone has been deregulated in supply and demand by Debeers since July, 2000, therefore, the price maintenance policy of diamond market also has been changed. In the short term, the diamond price in market has been down, whereas, in the long term, the market share of Debeers has affected the high quality of diamond price in world market. Before 1985, both G color and VVS1 clarity were used as the level of percentages in the diamond certificate of authenticity in Korea. But, after 1985, the diamond certificate of authenticity uses Diamond Grading Report. Results - Between the 1970's and 1980's, Debeers had controlled about 80 percentages of international diamond supply market. But, Debeers share in diamond market fell by 60 percentages in 2000's. Debeers supplied 31%(4390 carets) of international diamond supply and 41%(39 billion dollars) in 2003. However, Debeers shares 50% of market shares in the diamond supply market by Alosa in Russia. In Korea, the diamond grading report system has been used since 1985. But, the diamond grading report system has price bubbles and much irrational parts in grading system methods. Conclusions - 4C, the grading system of diamond, is a method for comparing and evaluating diamond objectively. Diamond is graded according to its color, cut, clarity, and carat. The price of diamond is determined based on its each item. Consumers purchase diamond for the purpose of investment and wearing. In terms of investment, it is recommended to purchase diamond with color of D grade, cut with Excellent or Very Good Cut grade, Clarity of FL or IF, and more than 3 carat. As for wearing purpose, it is highly recommended for diamond to have color of F or G grade, cut of Excellent or Very Good Cut, clarity of VS2 or SI1, and more than 1 carat Before 2000, Central Selling Organization(CSO) distributed about 80 percentages rough diamond to world market exclusively by purchase, classification, assessment, and sales. After 2000, Dbeers diamond company looses slowly market shares, while Almosa diamond company etc. in Russia are taking over world market shares more and more. Debeers market shares have been falling over the years, and the international diamond markets are gradually growing by other international diamond companies. But, there is no change in Korean diamond market after 1980's. Korean diamond distribution needs to follow international level of Diamond Grading System. By using different grading systems with different panel members, Korean diamond grading system needs to follow international perfect grading systems to grow diamond markets and maintain within top 10 diamond markets countries.

• The Journal of the Korea Contents Association
• /
• v.21 no.7
• /
• pp.271-280
• /
• 2021

The main purpose of this study is to examine the awareness of poverty cause on the welfare perception, and to verify the moderating effect of trust in government on the relationship between the awareness of poverty cause and welfare perception. To this end, 2,027 members over the age of 20 who completed the supplementary survey were analyzed using data from Korean Welfare Panel in 2019(14th). To analyze, we conducted a hierarchial regression analysis and confirmed the explanatory force change. As a result of that: First, among the sub-factors of awareness of poverty cause, the awareness of individual responsibility showed negative influence on welfare perception, while the awareness of social structure responsibility and fate showed a positive influence. Second, trust in government showed a positive influence on welfare perception. Third, the moderating effect of trust in government has been partially verified. In other words, among the sub-factors of awareness of poverty cause, it was significant in the relationship between awareness of individual responsibility and welfare perception, and social structure responsibility theory and welfare perception. From this result, it was confirmed that the reinforcement of social capital, such as trust in government, as well as attitudes toward the cause of poverty, is very important to improve the welfare perception of social members. Based on this results, this study has proposed the implications, discussions and limitations of the study.

• Journal of the Korean Institute of Gas
• /
• v.26 no.3
• /
• pp.27-37
• /
• 2022

With the recent increase in the spread of ESS (Electric Storage System), the damage to human life and property is also rapidly increasing due to continuous fires caused by ESS. In the manufacture of urethane sandwich panels used in ESS, it is necessary to improve the flame retardant performance. In this study, in order to realize the flame retardant properties of flexible polyurethane foam, the effect of the tissue density of the product due to the change of the isocyanate functional group parameter that changes the physical properties of the product on the fire performance was studied. The product was manufactured by changing the density of the urethane structure, and combustion performance tests, gas toxicity tests, and smoke density tests were performed. As a result, it was confirmed that the total amount of heat released had excellent performance when the isocyanate functional group was high, and had no correlation with the maximum heat release rate. When the value of the isocyanate functional group was 2.7 or more, the collapse of the shape could be prevented. In the gas hazard test, the performance was increased when the isocyanate functional group was relatively high, so a flame retardant for the Char system, which had a dense structure and easy to form a carbonized film, was added. confirmed to be. Therefore, as a result of this study, it is thought that it will be possible to lay the foundation for the development of a flame retardant to replace the cheap urethane sandwich panel used in the past.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1259-1266
• /
• 2022

Recently, due to the specialization of structural design standards and evaluation methods, the classification rules are being integrated. A good example is the common international rules (CSR). However, detailed regulations are presented only for the cargo hold area where the longitudinal load is greatly applied, and no specific evaluation guidelines exist for the bow and stern structures. Structural design of the mentioned area is carried out depending on the design experience of the shipbuilder, and because no clear standard exists even in the classification, determining the root cause is difficult even if a structural damage problem occurs. In this study, an engineering-based solution was presented to identify the root cause of representative cases of buckling damage that occurs mainly in the stern. Buckling may occur at the panel wall owing to hull girder bending moment acting on the stern structure, and the plate thickness must be increased or vertical stiffeners must be added to increase the buckling rigidity. For structural strength verification based on finite element analysis modeling, reasonable solutions for load conditions, boundary conditions, modeling methods, and evaluation criteria were presented. This result is expected to be helpful in examining the structural strength of the stern part of similar carriers in the future.

• Journal of Aerospace System Engineering
• /
• v.18 no.1
• /
• pp.1-10
• /
• 2024

In a previous study, a structure of a superplastic yoke consisting of a thin FR4 layer laminated with viscoelastic tape on both sides of a shape memory alloy (SMA) was proposed to reduce residual vibration generated by a deployable solar panel during high motion of a satellite. Damping properties of viscoelastic tapes will change with temperature, which can directly affect vibration reduction performance of the yoke. To check damping performance of the yoke at different temperatures, free damping tests were performed under various temperature conditions to identify the temperature range where the damping performance was maximized. Based on above temperature test results, this paper predicts temperature of the yoke through orbital thermal analysis so that the yoke can have effective damping performance even if it is exposed to an orbital thermal environment. In addition, the thermal design method was described so that the yoke could have optimal vibration reduction performance.

• Journal of the Korean Regional Science Association
• /
• v.39 no.4
• /
• pp.33-51
• /
• 2023

This study aims to investigate the changes in the employment structure of occupational groups by job characteristics and analyze the factors influencing wage premiums in local labor markets from 2010 to 2020. This study's analysis involves three primary steps. First, the occupational characteristics data from the Korea Network for Occupations and Workers are subjected to an exploratory factor analysis, and then a non-routine task intensity index is calculated by each occupations. Then, we conduct an exploratory analysis of changes in the distribution of employment by occupation from 2010 to 2020 by combining data from the Population Census with data from the Korean Labor and Income Panel Study to construct individual-level and regional-level data. Thirdly, we employ a hierarchical linear model to examine the individual-level and regional-level factors influencing wage premiums. Since 2010, the proportion of employment in occupations requiring non-routine task has continued to rise and now dominates the metropolitan labor market. Moreover, agglomeration effects resulting from urbanization produce a substantial wage premium for wage workers in occupations requiring non-routine tasks. This study seeks to provide policy implications to mitigate inequality and polarization in local labor markets by empirically analyzing the transition of occupational structure and wage inequality in relation to the local labor market context.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.60-71
• /
• 2024

The present study aims to investigate the level difference of floor impact noises of composite floor structure using EVA resilient materials. In order to this, four different types of resilient materials were designed combining PET, PP sheet and EVA mount including Flat type, Deck type, Cavity type and Mount type. Totally 9 different samples were made for acoustic measurements which were carried out twice with bang-machine and impact ball as the heavy-weight floor impact noise sources. All the floor impact noise measurements were undertaken at the authentication institution. As a result, concerning Flat and Cavity types, it was found that 2 dB ~ 5 dB of heavy-weight floor impact noise was reduced supplementally when PET was added, while floor impact noise larger than 50 dB was acquired when single resilient material was used. Especially, most high performance was obtained for Mount type with 1st grade of light-weight floor impact noise and 2nd grade of heavy-weight floor impact noise. This is because of material property with low dense PET sound absorption materials which fill all around EVA mounts. Also, it was considered that this results are due to the sound impact absorption by the both EVA mounts and the air cavity between EVA mount and PP sheet. Also, it was found that at least 36 EVA mounts per 1m2 area of resilient panel make more noise reduction of heavy-weight floor impact noises.