• 한국산학기술학회논문지
• /
• 제11권5호
• /
• pp.1805-1813
• /
• 2010

본 연구의 목적은 복합소재패널 즉 FRP 내력패널을 이용한 반강접 강골조의 내진성능평가이다. 강골조의 최적내진보강을 제안하기 위하여 중약지진 규모의 지진자료를 이용하여 모멘트골조에 복합소재패널의 보강위치를 바뀌어가며 해석을 수행하였다. 복합소재패널이 보강된 강골조의 지진해석은 시간이력해석을 이용하여 수행하였으며, 활용된 지반운동자료는 미국 NEHRP 프로젝트의 모멘트저항 골조에 활용한 자료 중, 50년 동안 지진이 일어날 가능성 10%, 50%의 확률을 가진 지진 20개씩을 활용하였다. 접합부는 현장에 많이 쓰이고 있는 반강접 접합부를 고려하였으며, 복합소재패널 연결부는 비선형 연결요소는 GAP을 사용하였다. 복합소재패널을 이용한 강골조가 패널을 보강하지 않은 무보강에 비해 보강패턴에 따라 보강효과를 검증해 보았으며, 보강 후 구조물응답에 대하여 고찰하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.693-698
• /
• 2002

For the evaluation of the plasma display panel (PDP)'s noise, vibration and sound characteristics of fanless PDP are measured and investigated. PDP is a type of two-electrode vacuum tube which operates on the same principle as a household fluorescent light. An inert gas such as argon or neon is injected between two glass plates on which transparent electrodes have been formed, and the glass is illuminated by generating discharge. For this discharge, both high voltage and currents are needed and cause an acoustic noise. We investigated the noise characteristics connected with both a electromagnetic elements from SMPS to panel through X, Y and logic board, and a mechanical elements form panel to case through transfer path which related with vibration and heat. To reduce the noise of PDP, a discharge pulse memory design related with both higher brightness and lower power consumption is important and mechanical characteristics connected with dissipation process of both heat and vibration generated by panel discharge must be investigated.

• 한국태양에너지학회 논문집
• /
• 제25권4호
• /
• pp.85-92
• /
• 2005

One of the most effective methods for utilizing solar energy is to combine thermal solar and optical energy simultaneously using a hybrid panel. Many systems using various kinds of photovoltaic panels have already been constructed. But utilizing solar energy by means of a hybrid panel with concentrator has not been to be attempted yet. Normally if sunlight is directed on the solar cell, and there is no increase in temperature, the absorption energy of each cell will increase per unit area. In a silicon solar cell. however, cell conversion efficiency decreases according to the increasing temperature. Therefore, to maintain cell conversion efficiency under normal condition, it is necessary to keep the cell at operating temperature. we design and make new hybrid panel with cooling system to prevent increasing of temperature on cell, collect effectively thermal energy. We compared performance of new hybrid panel with PV module and thermal panel. We also evaluated conversion efficiency, electric power and thermal capacity and confirmed cooling effect from thermal absorption efficiency.

• 한국의류학회지
• /
• 제22권4호
• /
• pp.482-492
• /
• 1998

With the purpose of developing a objective fitness evaluation system for knits, the basic bodice pattern for knit was drafted and the suitability of the altered pattern was evaluated. For each of nine different knits, six sleeveless shirts were made with patterns that were altered by different pattern alteration rate: 0%, 30%, 40%, 50%, 60%, or 70% of the stretch rate of the knit. The panel that was composed of 25 clothing specialists evaluated the fitness of the garments. The distance from the dress form landmark to the garment landmark was measured from each experimental garment. And the results of garment fitness evaluation and the measurement of distance from the dress form landmark to garment landmark were compared. The results of this study are as follows: There was high correlation(r$\geq$0.9) between the evaluation of the panel about the garment fit and the landmarks distance. The stretch rate of knits affected the evaluation of the garment fit. The stretch rate in course of knits affected on the garment fit at crosswise direction. The suitable pattern alteration rate was lower than 30% for the knits with high stretch rate in course. It was concluded that in order to get the appropriate knit bodice pattern length, the front bodice pattern must be less shorten than the back bodice pattern. The alteration rate at hip line must be lower than for waist or bust line.

• 한국건설순환자원학회논문집
• /
• 제8권3호
• /
• pp.269-275
• /
• 2020

본 연구에서는 초고성능 콘크리트를 적용한 경량 프리캐스트 패널 개발의 일환으로 단면 두께와 철근 배근 유무에 따른 패널의 휨 재하 실험을 수행하였다. 일반 콘크리트 패널 1개와 초고성능 콘크리트를 사용한 경량 프리캐스트 패널 3개로서 총 4개의 패널을 제작하였다. 초고성능 콘크리트를 사용하고 철근을 보강하지 않은 패널은 단면 크기와 상관없이 일반 콘크리트 패널에 비해 휨 성능이 저하되는 것으로 나타났다. 초고성능 콘크리트를 적용한 속빈 단면에 콘크리트 양을 감소시킨 패널은 일반 콘크리트 패널에 비해 휨 성능이 150% 향상되었다. 이는 초고성능 콘크리트를 사용한 프리캐스트 패널의 단면 최적화 설계를 통해 더욱 경량화가 가능할 것으로 판단된다. 초고성능 콘크리트를 사용한 경량 프리캐스트 패널을 실제 구조물에 적용하기 위해서는 전단 성능과 연결 상세에 대한 추가 검토가 필요할 것으로 판단된다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 자동차부품 제작기술의 진보
• /
• pp.75-86
• /
• 1996

Three-Dimensional finite element analysis is performed using PAM-STAMP for design evaluation of automotive back door inner panel die. Gravity process by blanks own weight, binder-wrap process, and drawing process in the forming operations are sequentially simulated with Virtual Manufacturing Method. The most valuable result in this research is that 3-D FEM analysis can be applied to the design evaluation of draw die in the die try-out, though effects of mesh size and drawbead resistance force on the numerical accuracy are much sensitive. For the intensive application to draw-die design and try-out, the experimental know-hows about the forming variables such as friction coefficient, punch velocity, drawbead force, etc are necessary.

• 소성∙가공
• /
• 제6권2호
• /
• pp.152-160
• /
• 1997

Three-Dimensional finite element analysis is performed using PAM-STAMP for design evaluation of automotive back door inner panel die. Gravity process by blank own weigth, binder-wrap process, and drawing process in the forming operations are sequentially simulated with Virtual Manufacturing Method. The most valuable result in this research is that 3-D FEM analysis can be applied to the design evaluation of draw dies in the die try-out, though effects of mesh size and drawbead resistance force on the try-out, the experimental knowhows about the forming variables such as friction coefficient punch velocity, drawbead force, etc are necessary.

• 한국전자거래학회지
• /
• 제7권1호
• /
• pp.19-34
• /
• 2002

The main objective of this research is to find out whether there exist any user interface factors that influence service information management professionals(SIMP)'s business activities on the web. The result of this study shows that there exists a significant level of difference between two groups of office Professionals： SIMP and general office management professionals on user interface factors. We analyzed the past and current research results and focused on four major evaluation categories： (1) web design, (2) structure, (3) navigation, and (4) interaction and identified 26 evaluation items in those categories. The study has been initiated by an intuition that there might be a significant difference in sets of user interface factors that influence SIMP and general office professionals. From the list of Best 100 Web Sites the best 30 information-providing web sites and the best 30 service-providing web sites were carefully chosen by a panel of 10 members for each group. To evaluate 60 web sites, another panel was formed by 30 professionals from each group, and they conducted evaluation in their own work settings. Reliability analysis on user interface factors and T-test to find out any influencing factors on SIMP were performed. As a result of this study, we have recognized that clarity, formation, consciseness, economics, and robustness are the most influencing user interface factors for web designers to concern when they develop web sites for SIMP. The study result can be improved by enhancing reliability of choosing target web sites In investigate and panel members. Also, in the future study it is recommended to investigate influencing factors for office professionals in terms of. age, sex, experience, academic background, etc.

• 한국조리학회지
• /
• 제13권2호
• /
• pp.201-215
• /
• 2007

This study was carried out to examine the sensory characteristics of Demi-glace sauce prepared by fresh basil with different amount of salt added. The evaluation of the sensory quality of Demi-glace sauce prepared by fresh basil was conducted by unexperienced and trained panel with regard to color, odor, taste, appearance, texture, viscosity, and overall acceptability while varying the quantity of salt added, the time of preparation, and the conditions of sauce offered in which each panel was supposed to evaluate both sauce itself and sauce with meat. It was found that Demi-glace sauce prepared by fresh basil with 0.3% salt added was gained the highest score from both panels in most properties and the second was the one with 0.1% salt added. In the sensory properties correlation analysis according to the time of preparation and the conditions of sauce offered, there was no significant correlation in most sensory properties for the unexperienced panel, except some significantly positive correlation between taste and overall acceptability of the sauce. Whereas there was a positive correlation in the majority of sensory properties for the trained panel regardless of the time of preparation and the conditions of sauce offered. The sauce with 0.3% salt added ranked as the best recipe by both panels among four different ratios of salt adding regardless of the time of preparation and the conditions of sauce offered. Triangle test showed that the sauce B with 0.1% salt added before the preparation was more highly appreciated in terms of taste than the sauce A with 0.1% salt added in the final step of preparation. In conclusion, it could be suggested that Demi-glace sauce prepared by fresh basil with 0.3% salt added is the best recipe for commercial products. Also, there seems to be the need of further sensory evaluation studies on the Demi-glace sauce according to the time of addition during the process of preparation.

• 한국의류학회지
• /
• 제39권4호
• /
• pp.560-575
• /
• 2015

This study developed brassieres using a suspension system with the elastic panel on the inside of the brassiere cup to replace the wires for 20s women with large and elongated breasts. The following results were obtained by analyzing clothing pressure and a subjective evaluation of brassieres with elastic panels at the bottom or side of the various reduction ratios and with the shoulder straps of the brassiere. Brassieres with dual panels (rather than with only the bottom panel) lowered clothing pressure as well as improved wearing comfort and function. Compared to brassieres with a panel of 10%, brassieres with a panel of 15% lowered clothing pressure and provided superior wearing comfort. In this case, the higher the reduction ratio of the side panels increased clothing pressure on the shoulder, but provided superior well-fit, bust-up, and vibration restraint. To reduce the reduction ratio of the side panel decreased clothing pressure on the shoulder and decreased support functions. Therefore, the reduction ratio of the side panels should be determined by preferable functions such as wearing comfort that depend on the needs of the wearer. It is suggested that a brassiere with a dual elastic panel can replace the brassiere wire.