• Journal of Korean Academy of Nursing Administration
• /
• v.18 no.1
• /
• pp.106-117
• /
• 2012

Purpose: This study was designed to develop quality outcome indicators for nursing homes and community-based home care that would contribute to an appropriate evaluation and improvement of quality of long term care in Korea. Methods: The preliminary quality indicators of long term care were developed from a literature review and clinical expert panel. A content validity testing was done using a panel of experts who were selected from academic and clinical field of long-term care. The final quality indicators were confirmed after application in four nursing homes and four home care agencies to test clinical validity. Results: The preliminary quality indicators consisted of 3 domains and 19 indicators. The final quality indicators were composed of 4 domains and 17 indicators. Conclusion: This study demonstrated the feasibility of outcome quality indicators in long term care. These quality indicators can be effectively used to evaluate the quality of nursing home and home care and to improve the quality of care in the Korean long-term care system.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.78-80
• /
• 2014

Silicone structural glazing (SSG) is a method utilizing a silicone adhesive to attach glass, metal, or other panel material to the structure of a building. Windload and other impact loads on the facade are transferred from the glass or panel through the silicone structural sealant to the systems' framework. Silicone structural glazing systems are currently a very common method of glazing throughout the world. Locally, structural silicone glazing has become very common to achieve aesthetically pleasing and high utilization of small land for both residential and commercial building. Although structural silicone glazing has been utilized for approximately thirty years in Korea, the understanding of its technology was low and limited. Consequently, Korean projects experienced many quality issues during assembly and construction, even in very recently finished buildings. Adhesion loss and water infiltration occurred on more than one project, and the time and cost to repair these issues were substantial. In general, there are two kinds of structural silicones depending on fabrication methods. 1part structural silicone is for site glazing system and 2part structural silicone is for unitized factory glazing system. In this paper, 2part structural silicone which is very common for factory fabricating curtainwall systems was evaluated with regards to various mixing ratio. Since the structural performance of 2part sealant can be affected by mixing ratios, some extra ranges of recommended mixing ratio were evaluated to see any performance differences. Besides on cure profile, comparative evaluations for mechanical properties and adhesion develop on common building substrates were conducted.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.617-624
• /
• 2021

In this study, the quality properties according to the ratio of magnesia and potassium phosphate of the magnesia composite were evaluated to control the quality of the parent material in terms of materials when designing living concrete panels. The quality properties are 7 levels (30, 35, 40, 45, 50, 55 and 60%) for W/B, 4 levels for P:M (1:0.5, 1:1.0, 1:2.0 and 1:3.0 vol. %) was prepared and evaluated. As a result of evaluating the flow of the magnesia complex, as W/B increased, the flow showed a tendency to increase, and the flow showed a tendency to decrease as the P:M increased. As a result of the evaluation of the compressive strength of the magnesia composite, the strength showed a tendency to decrease as P:M increased. In addition, it was confirmed that an optimal P:M ratio exists.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.11
• /
• pp.11-19
• /
• 2021

In this paper, we propose a prototype platform combined with the power management system using, as an auxiliary power storage device, a supercapacitor that can be fast charged and discharged with high power efficiency as well as semi-permanent charge and discharge cycle life. For the proposed platform, we designed a technique which is capable of detecting the state of power cutoff or resumption of power supplied from the solar panel in accordance with physical environment changes through an interrupt attached to the micro-controller was developed. To prevent data loss in a computing environment in which continuous power supply is not guaranteed, we implemented a low-level system software in the micro-controller to transfer program context and data in volatile memory to nonvolatile memory when power supply is cut off. Experimental results shows that supercapacitors effectively supply temporary power as auxiliary power storage devices. Various benchmarks also confirm that power state detection and transfer of program context and data from volatile memory to nonvolatile memory have low overhead.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.609-616
• /
• 2019

This paper proposes a design plan of short-term temporary housing for the victims by disaster. Also construction workability and residential environment evaluated by mock-up. In particular, in the event of a disaster, victims have lived the auditorium or gymnasium of the nearby school which is an emergency shelter. However, there was a problem of livability. Therefore, it is the purpose of study to provide temporary housing that resides within 30 days. For this purpose, a composite panel with light weight and insulation select to produce mock-up. The mock-up complete in about an hour. This is because it is made only of the composite panels. The composite panels confirm to be easy to load and construct. And mock-up evaluates insulation and waterproofing performance in the laboratory. As a result, Mock-up has insulation and waterproofing performance. This suggests an alternative to short -term temporary housing.

• Composites Research
• /
• v.32 no.2
• /
• pp.113-119
• /
• 2019

The objective of this research is to study the mechanical and vibration characteristics of vibration damping aluminum panels for automotive parts. For this purpose, the test and simulation results of aluminum-resin hybrid materials and aluminum sheet materials were compared. Tensile strength and elastic modulus of the hybrid material were approximately 10% lower than aluminum sheet. Also, it was showed that the hybrid material have lower natural frequency than aluminum sheet, and it was confirmed that loss factor increases as the thickness of resin increases. Finally, it is confirmed that the test results and the analysis results are similar with each other and the performance prediction of the materials are possible by FEA.

• Journal of radiological science and technology
• /
• v.42 no.4
• /
• pp.259-263
• /
• 2019

This study was purpose to compare image quality of Indirect digital radiography (IDR) system by using the International electro-technical commission standard(IEC 62220-1) which were applied to IEC in medical imaging. To evaluation the analysis of Modulation transfer function(MTF) measurements edge device each angle by using edge method. In this study, Aero (Konica, Japan) which is Indirect flat panel detector(FPD) was used, the size of image receptor matrix $1994{\times}2430$ which performed 12bit processing and pixel pitch is $175{\mu}m$. In IEC standard method were applied to each angle were compared. The results of shown as LSF at $2.0^{\circ}$ and $3.0^{\circ}$ angeles. Shape is constant and shows smooth shape. The amount of data seemed reasonable and 2.19 cycles/mm and 2.01 cycles/mm at a spatial frequency of $2.0^{\circ}$ and $3.0^{\circ}$ at an MTF value of 0.1. At an MTF value of 0.5, the spatial frequencies were $2.0^{\circ}$ and 1.11 cycles/mm and 0.93 cycles/mm at an angle of $3.0^{\circ}$. This study were to evaluate MTF by setting the each $2{\sim}3^{\circ}$ each angle and to suggest the quantitative methods of measuring by using IEC.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.4
• /
• pp.477-483
• /
• 2019

Recently, precast type SCP modules are being used instead of PSC structures in order to reduce the construction period and costs of special structures such as nuclear power plants and LNG storage tanks. The inside of the SCP module is connected with a stud for the integral behavior of the steel and concrete, and the use of high fluidity concrete is required. High fluidity concrete generally has a high content of binder, which leads to an increase in hydration heat and shrinkage, and a problem of non-uniform strength development. Therefore, in this study, fluidity and passing performance of high fluidity concrete according to material properties are investigated to select optimum mix design of low binder based high fluidity concrete. Mechanical properties of high fluidity concrete before and after pumping are examined using pump car. The filling performance of SCP mock-up members was evaluated by using high fluidity concrete finally.

• Journal of Convergence for Information Technology
• /
• v.10 no.12
• /
• pp.146-155
• /
• 2020

This study was to evaluate the usefulness of gamma glutamyl transferase (GGT) as a surrogate marker predicting metabolic syndrome. 7,155 non obese men over the age of 20 were studied as subjects. The criteria for diagnosing MetS were the National Cholesterol Education Program - Third Adult Treatment Panel (NCEP-ATP III). The risk of developing MetS according to GGT was conducted logistic regression analysis, and the ROC (receiver operating characteristic) curve was obtained to confirm GGT ability to predict the risk of MetS. Regardless of age and body mass index, MetS had a 7.09 times higher risk of onset in the fourth quartile than in the first quartile of GGT (p<0.001). The AUC (area under the curve) of GGT for the diagnosis of MetS was 0.715, and the cutoff value of GGT was 40.0 U/L, the sensitivity was 65.0%, and the specificity was 70.2%. Therefore, GGT is considered to be a useful diagnostic index for diagnosing MetS.

• Journal of Korea Trade
• /
• v.26 no.6
• /
• pp.41-60
• /
• 2022

Purpose - The policy implications of free trade agreements have traditionally been a matter of debate among economists. The official signing of the Korea-China Free Trade Agreement provides economists with a quasi-natural experiment to analyze the FTA's policy effects. This article aims to more accurately understand the impact of Korea's FTA accession on the macro economy. Design/methodology - This study adopts the counterfactual method based on panel data to find common factors in the generation process of macro data to fit the counterfactual path, to accurately evaluate the effect of the macro policy. Findings - Our research results show that the signing of the Korea-China FTA has a relatively significant short-term positive effect on Korea's economic growth. On average, Korea's real GDP growth rate has increased by 2.1%. This study finds evidence in support of FTA signing not having a significant impact on Korea's GDP growth in the long run. Additionally, we evaluated the impact of the FTA on Korea's imports and exports and found that it had a significant positive impact in the short term, but the trade effect of the FTA is significantly affected by the external macro-environment. Originality/value - First, this study uses macro panel data at the national level to examine the impact of the Korea-China FTA on Korea, and more accurately describes the policy effect of the FTA. Second, our empirical results show that the Korea-China FTA policy impact is subject to occasional changes in the external environment, such as the geopolitical conflict (crisis) between Korea and China, and the US-China trade war. Finally, the analysis shows that the short-term effect of FTA is significant but the long-term is uncertain, which provides empirical evidence for the debate on whether joining FTA can promote national economic growth.