• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.17
• /
• pp.7433-7436
• /
• 2014

Background: Gastric cancer (GC) is the second cause of cancer related death in the world. It may develop by progression from its precancerous condition, called gastric atrophy (GA) due to gastritis. The aim of this study was to evaluate the accuracy of serum levels of pepsinogens (Pg) and gastrin-17 (G17) as non-invasive methods to discriminate GA or GC (GA/GC) patients. Materials and Methods: Subjects referred to gastrointestinal clinics of Golestan province of Iran during 2010 and 2011 were invited to participate. Serum levels of PgI, PgII and G17 were measured using a GastroPanel kit. Based on the pathological examination of endoscopic biopsy samples, subjects were classified into four groups: normal, non-atrophic gastritis, GA, and GC. Receiver operating curve (ROC) analysis was used to determine cut-off values. Indices of validity were calculated for serum markers. Results: Study groups were normal individuals (n=74), non-atrophic gastritis (n=90), GA (n=31) and GC patients (n=30). The best cut-off points for PgI, PgI/II ratio, G17 and HP were $80{\mu}g/L$, 10, 6 pmol/L, and 20 EIU, respectively. PgI could differentiate GA/GC with high accuracy (AUC=0.83; 95%CI: 0.76-0.89). The accuracy of a combination of PgI and PgI/II ratio for detecting GA/GC was also relatively high (AUC=0.78; 95%CI: 0.70-0.86). Conclusions: Our findings suggested PgI alone as well as a combination of PgI and PgI/II ratio are valid markers to differentiate GA/GC. Therefore, Pgs may be considered in conducting GC screening programs in high-risk areas.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.4
• /
• pp.39-45
• /
• 1995

The plywoods commonly used as decorative interior materials for the construction are inflammable and so it is a causative factor for making fire accidents, resulting in the destruction of human life and personal properties. Indeed, it is, therefore, required to produce fire-retardant plywoods. In this study, a special grade of defect-free, Kapur plywood was used. Specimens were cut into 3- by 20cm dimensions from 120- by 240- by 0.33-cm panels(thin panel) or 120- by 240- by 0.5-cm panels(thick panel). Some specimens were treated with diammonium phosphate(DAP), but some were not treated with diammonium phosphate to use as control panels. Chemical absorption, drying curves, drying rates and dynamic Young's modulus were investigated. The results were summaries as follows; 1. The specimens were soaked into 19% diammonium phosphate solution by a full cell pressure process and the diammonium phosphate retained in the thin and thick plywoods was 1.409kg/$(30cm)^3$, 1.487kg/$(30cm)^3$, respectively. 2. Diammonium phosphate-treated plywoods were redried with press-drying process at one of either condition dried on the platen($115^{\circ}C$) for a period of time or dried on the platen($50^{\circ}C$) for 3 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. or dried on the platen($60^{\circ}C$) for 2 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. The drying rate of treated thin specimens dried at $60^{\circ}C$ plus $30^{\circ}C$ and $115^{\circ}C$ only was found to be 0.04 %/min. and 8.53 %/min. Similarly, the drying rate of treated thick specimens were 0.03 %/min. and 6.77 %/min. respectively. 3. It was evident that highly-significantly different drying rate of treated plywoods was observed between plywood thicknesses and platen temperatures and the rate was increased by elevating the platen temperature up to $115^{\circ}C$. Based on the two-way variance analysis, highly significant drying rate was observed from the interaction between plywood thicknesses and platen temperatures. 4. After redrying, the specimens were weighed and reconditioned to a constant weight in a facility maintained temperature ($20^{\circ}C$) and relative humidity(65%) prior to test dynamic Young's modulus. The test revealed that the thin specimens dried at the platen temperature of $50^{\circ}C$, $60^{\circ}C$, $115^{\circ}C$ and untreated specimens showed 1.070E+09 dyne/$cm^2$, 1.156E+09 dyne/$cm^2$, 1.243E+09 dyne/$cm^2$, and 1.052E+09 dyne/$cm^2$, respectively. Likewise, the thick specimens revealed 5.647E+09 dyne/$cm^2$ 5.670E+09 dyne/$cm^2$, 6.395E+09 dyne/$cm^2$ and 5.415E+09 dyne/$cm^2$, respectively. 5. It was evident that significantly different dynamic Young's modulus was observed between the plywood thickness and the platen temperature, but not in the two-way interaction between the plywood thickness${\times}$the platen temperature.

• Journal of Life Science
• /
• v.25 no.12
• /
• pp.1445-1449
• /
• 2015

The pinewood nematode Bursaphelenchus xylophilus (Nematoda: Parasitaphelenchidae) poses a serious threat to pine forests in Europe and East Asia, leading to a debilitating pine wilt disease. Infected pine trees in Korea are generally fumigated or crushed to small wood chips after felling. Although pine wilt disease often recurs in pest management sites, there are no adequate means to monitor the effectiveness of pest control measures in those sites. Recently, a male-produced aggregation pheromone, 2-(undecyloxy)ethanol, was shown to be useful for attracting several Monochamus species, which are vectors for the pinewood nematodes. In this study, we investigated the abilities of 2-(undecyloxy)ethanol at three different doses (175, 350, and 700 mg), as well as host plant volatiles (α-pinene and ethanol), to attract M. alternatus (Coleoptera: Cerambycidae) at a pine forest in Pohang, Korea where infected pine trees had been cut down and fumigated. Twenty-seven M. alternatus were captured in cross-vane panel traps made of polyethylene terephthalate bottles and acrylic sheets. The results indicate that a high dose of 2-(undecyloxy)ethanol (700 mg per trap) is the most effective for attracting M. alternatus. The aggregation pheromone could be used to monitor the effectiveness of pest control measures as well as M. alternatus populations.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.9
• /
• pp.1475-1481
• /
• 2019

Objective: The objective of the present study was to investigate pork quality from Hereford${\times}$Berkshire female and intact male pigs reared outdoors in an alternative production system. Methods: Berkshire purebred sows were artificially inseminated, once in the fall and again in the spring of the following year, with semen from Hereford boars and managed free of antibiotics in an outdoor hoop structure until the last month of pregnancy, after which they were moved to a pasture-based unit of 0.8 hectares with individual lots with a farrowing hut, shade, and water ad libitum. Piglets were weaned at 4 weeks of age and housed in a deep-bedded hoop structure, grouped by sex. Animals were harvested at market weight of 125 kg, approximately 200 days of age. Hot carcass weight was collected at the time of the harvest. After 24 hours of refrigeration, carcass characteristics were measured. Longissimus dorsi samples collected from the right side loin. Loins were cut into 2.54-cm thick chops and were used to measure marbling score, color score, drip loss, and ultimate pH. Sensory panel tests were conducted as well at North Carolina State University. For pork characteristics and sensory panel data, trial and sex were included in the statistical model as fixed effects. Hot carcass weight was included in the model as a covariate for backfat thickness. Results: Neither the subjective nor the objective color scores displayed any differences between the boars and the gilts. No difference was found for pH and marbling score between trials or sexes. Gilts had a thicker backfat measurement at the last lumbar and a narrower longissimus muscle area measurement when compared to the boars. The only difference in the sensory characteristics was found between the trials for texture and moisture scores. Conclusion: Consumers were not able to detect boar taint under the condition of this study, which is that the intact males were reared outdoors. Additional trials would be necessary; however, based on the results of the present study, outdoor rearing can be suggested as a solution to the issue of boar taint.

• Journal of Preventive Medicine and Public Health
• /
• v.45 no.2
• /
• pp.98-104
• /
• 2012

Objectives: A positive association between serum albumin levels and metabolic syndrome has been reported in observation studies, but it has not been established in the Korean population. The purpose of this study was to evaluate the association between serum albumin levels and the presence of metabolic syndrome among a sample of apparently healthy Korean adults. Methods: This cross-sectional study analyzed data of 3189 community-dwelling people (1189 men and 2000 women) who were aged 40 to 87 years and were living in a rural area in Korea. Serum albumin levels were classified into quartile groups for each sex. Metabolic syndrome was defined according to the National Cholesterol Education Program Adult Treatment Panel III guidelines with an adjusted waist circumference cut-off value ${\geq}90\;cm$ for men and${\geq}85\;cm$ for women). An independent association between serum albumin levels and metabolic syndrome was assessed by multiple logistic regression analysis. Results: Higher serum albumin levels were associated with increased prevalence of metabolic syndrome. The odds ratio (95% confidence interval) of the prevalence of metabolic syndrome for the highest versus the lowest serum albumin quartiles was 2.81 (1.91 to 4.14) in men and 1.96 (1.52 to 2.52) in women, after adjusting for age, smoking status, alcohol consumption, and physical activity. When each metabolic abnormality was analyzed separately, higher serum albumin levels were significantly associated with hypertriglyceridemia and hyperglycemia in both sexes, and with abdominal obesity in men. Conclusions: These results suggest that higher serum albumin levels are positively associated with an increased risk of metabolic syndrome in Korean adults.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.61-65
• /
• 2005

This paper describes the cut off time and the current characteristics of virgin RCDs and deteriorated ones in the seashore. The RCDs(Residual Current Protective Devices) are used for protecting the human body from electrical shock and for preventing facility accidents. According to the Korean standards, the RCDs are installed in panel boards. When RCDs are installed outside, they must be enclosed inside waterproof cases. In the case that RCDs are employed at temporary power sites and electrical facilities on the road they are exposed to the external environment. As a result, the RCDs deteriorated in the seashore for 3 months showed high failure rate, while the virgin RCDs all complied with Korean Standard. Considering that the RCDs are used under exposed condition outside, the reliance of RCDs must be ensured by modifying the related regulations and codes and by developing improved advanced in their performance.

• Fire Science and Engineering
• /
• v.20 no.1 s.61
• /
• pp.71-76
• /
• 2006

The major causes of electrical fire are classified to short circuit fault, overload fault, electric leakage and electric contact failure. The occurrence factor of the fire is electric arc or spark accompanied with electrical faults. Residual Current Protective Device(RCD) of high sensitivity type used at low voltage wiring cuts off earth leakage and overload, but the RCD can't cut off electric arc or spark to be a major factor of electrical fire. As the RCDs which are applied low voltage distribution panel are prescribed to rated breaking time about 30[ms](KS C 4613), the RCDs can't perceive to the periodic electric arc or spark of more short wavelength level. To be improved on such problem, this paper is proposed to a auxiliary control apparatus for RCD trip on electric arc or spark due to electrical fire. Some experimental results of the proposed apparatus is confirmed to the validity of the analytical results.

• Korean Institute of Interior Design Journal
• /
• v.25 no.4
• /
• pp.68-79
• /
• 2016

The purpose of this study is to provide a reference for stage space planning in modern theaters by analyzing and understanding stage components in terms of spatial composition, purposes, and correlation between them, and collecting various opinions from stage managers an directors. The findings are as follow: the determination of the size of proscenium arch is crucial, and it needs to be considered not only with the genre of the performance and the number of seats, but also with the size of the stage facility. The two-dimensional size of proscenium arch affects the scale of stage area in three-dimensional way; the size of main stage comes from the width of the arch, and the length of set battens comes from the stage width, and so on. The height of the arch affects the elevation of gridiron, and the height of the building itself ultimately. The number and length of the set battens are directly linked to the size of the winch room, and so is the number of the winches to the Mcc panel room. The 1st level gallery supplying power to lighting equipment needs to be wide enough for staffs to work with various equipments effectively and safely. Degree of practical usage of under-stage machinery turned out to be very low. In order to cut unnecessary waste and cost, the characteristics of the theater must get set first, and experts who know how stage works need to get involved in planning stage.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.4
• /
• pp.2285-2289
• /
• 2016

Background: Epstein-Barr virus (EBV) positive diffuse large B-cell lymphoma (DLBCL) of the elderly is an entity introduced in the latest WHO classification of lymphoid tumors and defined in patients older than 50 years without prior lymphoma or immunodeficiency. However, recently it has also been seen in patients under 50. There is thus debate as to whether these are separate entities. Materials and Methods: In this retrospective study, we analyzed de novo DLBCL admitted to our institute over a period of two years. Clinical data included age, sex, nodal and extranodal presentation. The results of an immunohistochemistry (IHC) panel were also reviewed. IHC findings were mainly used to sub-classify DLBCL as germinal center vs. non germinal center types. IHC for identification of LMP-1 (latent membrane protein) and in situ hybridization for detection of EBV-encoded RNA (EBER) was performed. EBV prevalence, clinical data and IHC findings were compared between patients under and over 50 years of age. Results: Out of 95 DLBCL, 11.6% were EBV positive (7.5% and 14.5% in the young and old groups). We did not find any significant differences in IHC subclasses and clinical data between EBV positive DLBCL (EBV+DLBCL) of young and old groups. Conclusions: EBV+DLBCL are not exclusive to patients older than 50 years. With regard to clinical data as well as IHC subclasses, no differences were evident between EBV+DLBCL of young and old groups. Our suggestion is to eliminate any cut off age for EBV+DLBCL.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.371-372
• /
• 2007

The major causes of electrical fire are classified to short circuit fault, overload fault, electric leakage and electric contact failure. The occurrence factor of the fire is electric arc or spark accompanied with electrical faults. Residual Current Protective Device (RCD), that is Earth Leakage Circuit Breaker(ELB) and Molded_case Circuit Breaker (MCB), of high sensitivity type used at low voltage wiring cuts off earth leakage and overload, but the RCD can't cut off electric arc or spark to be a major factor of electrical fire. As the RCDs which are applied low voltage distribution panel are prescribed to rated breaking time about 30[ms] (KS C 4613), the RCDs can't perceive to the periodic electric arc or spark of more short wavelength level. To be improved on such problem, this research development is proposed to a auxiliary control apparatus for RCD trip on electric arc or spark due to electrical fire. Some experimental results of the proposed apparatus is confirmed to the validity of the analytical results.