• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.1
• /
• pp.77-102
• /
• 1994

Many studies have been made on the masticatory and esthetic effects of prosthodontic treatments, but few on the restoration of pronunciation, especially in complete denture wearers. The purpose of this study is to provide a basis that could be of help to the complete denture wearers' speech adaptation by analyzing the influence of the palatal coverage upon the duration of consonants and vowels with the method of experimental phonetics. For this study, metal plates and resin plates were made for 3 male subjects in their twenties, who have good occlusion, and do not have speech and hearing disorders. Then 8 Korean consonants and 4 Korean vowels were selected, systemically considering phonetic variants such as the place and manner of articulation, lenis/fortis, mutual effect of each phoneme, etc. They were combined into meaningless tested words in the form of /VCV/, and were included in the carrier sentences. Each informant uttered the sentences 1) without the plate, 2) with the metal plate, 3) with the resin plate. The recorded data were analyzed through the waveform of sounds and spectrogram by using the program SoundEdit, Signalize, Statview 512+for the Macintosh computer. The duration of each segment was measured by searching for the boundaries between the preceding vowels and consonants, and between the consonants and the following vowels. The study led to the conclusion that. 1. With the palatal plate, the duration of all the tested words increased and the duration increased more with the resin plate than with the metal plate. 2. With the palatal plate, the duration of all the preceding vowels, consonants, and following vowels increased, but the temporal structure of the tested words was maintained. 3. As for the manner of articulation, fricative /s/(ㅅ) was greatly influenced by both kinds of palatal plates. 4. As for the place of articulation, alveolar sounds /d/(ㄷ), /n/(ㄴ) were greatly influnced by the kinds of palatal plates, and the velar sounds /n/(ㅇ), /g/(ㄱ) were influenced by the platal plates, but the kind of the palatal plates did not show any significance. 5. As for the lenis/fortis, lenis was influenced more by the kind of the palatal plates. 6. As for the influence of vowels upon each segment in the tested words, palatal vowel /i/(ㅣ) had greater influence than pharyngeal vowel /a/(ㅏ), and following vowels than preceding vowels.

• The Journal of Korean Academy of Prosthodontics
• /
• v.25 no.1
• /
• pp.71-94
• /
• 1987

This study was carried out to investigate the sound distortion following the alternation of the palatal plate thickness. For this study, 2 healthy male subjects (24-year-old) were selected. Born in Seoul, they both spoke Seoul dialect. First, their sounds of /na(나)/, /da(다)/, /1a(라)/, /ja(자)/, /cha(차)/, /ta(타)/, without inserting plates were recorded, and then the sounds with palatal plates of different thickness were recorded, successively. The plate was fabricated in 3 types, each palatal thickness being 1.0mm, 2.5mm, dentoalveolar portion 2.5mm, other residual portion was 1.0mm, successively. Each type plates named B, C, D-type, in succession. Series of analysis were administered through Computer(16 bit) to analyze the sound distortions. These experiments were analyzed by the LPC (without weighting, pre-weighting, post-weighting) of the consonants, vowels portion, formant frequency of the vowels and word duration of the consonants. The findings led to the following conclusions: 1. There was no correlation of the distortion rate on the 2 informants. 2. Generally, vowels were not affected by the palatal plate thickness in the formant analysis, however, more distortion was detected in the LPC analysis, especially C, D-type plates. 3. Consonants distortion was more evident in the C, D-type plate. 4. The second formant was most disturbed and reduced in the all consonants with insertion of the palatal plate, especially C, D-type plate. 5. Word duration was shortened in the plate inserted(except /ja/, /cha/), especially C, D-type. 6. It was found that dentoalveolar, hard palatal sounds were severely distorted in plate inserted, and they were mainly affected by the dentoalveolar portion thickness. 7. There was correlation between palatal thickness and consonants quality.

• The korean journal of orthodontics
• /
• v.48 no.5
• /
• pp.304-315
• /
• 2018

Objective: The purpose of this study was to analyze initial displacement and stress distribution of the maxillofacial complex during dentoskeletal maxillary protraction with various appliance designs placed on the palatal region by using three-dimensional finite element analysis. Methods: Six models of maxillary protraction were developed: conventional facemask (Type A), facemask with dentoskeletal hybrid anchorage (Type B), facemask with a palatal plate (Type C), intraoral traction using a Class III palatal plate (Type D), facemask with a palatal plate combined with rapid maxillary expansion (RME; Type E), and Class III palatal plate intraoral traction with RME (Type F). In Types A, B, C, and D, maxillary protraction alone was performed, whereas in Types E and F, transverse expansion was performed simultaneously with maxillary protraction. Results: Type C displayed the greatest amount of anterior dentoskeletal displacement in the sagittal plane. Types A and B resulted in similar amounts of anterior displacement of all the maxillofacial landmarks. Type D showed little movement, but Type E with expansion and the palatal plate displayed a larger range of movement of the maxillofacial landmarks in all directions. Conclusions: The palatal plate served as an effective skeletal anchor for use with the facemask in maxillary protraction. In contrast, the intraoral use of Class III palatal plates showed minimal skeletal and dental effects in maxillary protraction. In addition, palatal expansion with the protraction force showed minimal effect on the forward movement of the maxillary complex.

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.1
• /
• pp.83-102
• /
• 1989

This study was done to analyze the sound distortion, before and after insertion of the palatal palates. For this study, 4 healthy subjects (3 males and 1 female, each 24-year-old), who were born in Seoul were recruited from K university, and 3 type palatal plates were fabricated, each palatal thickness being 1.0mm, 2.5mm, dentoalveolar portion 2.5mm and elsewhere 1.0mm, named B,C,D-type repectively, and informants's sounds of /사(sa), 서(se), 소(so), 수(su), 스($s\.{+}$), 시(si)/ were recorded, without plate, and with palatal plates of different types, in succession. A series of analysis were adminstered through a 16 Bit IBM PC/AT using linear combination methods. These experiments were analyzed by the Cepstrum (Weighted and Euclidian), Log Area Ratio, Linear prediction correlation methods The findings led to the following conclusions : 1. It was confirmed that the same consonant, /ㅅ(s)/, variously distorted by the following vowel. 2. By and large, 시($s\.{+}$) was the most distorted in all conditions, and (sa), 소(so) were the least distorted in each condition. 3. There were no persistant correlation of the palatal plate types, and sound distortions of each informant were diverse with no regularities. 4. There were persistent correaltion to the Cepstrum (Weighted, Euclidian), Log Area Ratio. However, Linear prediction correlation has a different alteration pattern.

• The Journal of Korean Academy of Prosthodontics
• /
• v.26 no.1
• /
• pp.31-49
• /
• 1988

This study was performed to investigate the sound distortion following the alternation of the palatal plate thickness, for this study, 3 subjects who were born in Seoul and spoke Seoul dialect were recruited from K university male student population. First, their sounds of /아(a)/, 어(e)/, 오(o)/, 우(u)/, 으($\.{+}$), 이(i)/,에(e)/ without inserting plate were recorded , and then the sounds with palatal plates of different thickness were recorded, respectively. The palatal plates was constructed to cover the alveolar & palatal surfaces of the maxilla with an approximate thickness of 1.0mm, 2.5mm, and thickness of 2.5mm over the alveolar ridge & 1.0mm elsewhere and, named B, C, D-type, in succession. Series of analysis were administered through Computer (16 bit IBM PC/AT) at analyze the sound distortions. These experiments were analyzed by the LPC, Log Area Ratio. The findings led to the following conclusions: 1. Sound distortions were relatively minute in each condition and informations, however, /이(i)/ was the most distorted vowel in all conditions. 2. By and large, sound distortion was large in C, D-types. However, there was no correlation of the distortion rate on the 3 informants, and all tested vowels. 3. It was similar to LPC, Log Area Ratio distortion rates. 4. It was found that the sound distortion wit]1 plate inserted was verified to the numeric value with LPC and Log Area Ratio method.

• The korean journal of orthodontics
• /
• v.45 no.4
• /
• pp.209-214
• /
• 2015

Maxillary protraction is the conventional treatment for growing Class III patients with maxillary deficiency, but it has undesirable dental effects. The purpose of this report is to introduce an alternative modality of maxillary protraction in patients with dentoskeletal Class III malocclusion using a modified C-palatal plate connected with elastics to a face mask. This method improved skeletal measurements, corrected overjet, and slightly improved the profile. The patients may require definitive treatment in adolescence or adulthood. The modified C-palatal plate enables nonsurgical maxillary advancement with maximal skeletal effects and minimal dental side effects.

• Journal of Periodontal and Implant Science
• /
• v.45 no.5
• /
• pp.162-168
• /
• 2015

Purpose: The aim of this study was to analyze the anatomical dimensions of the buccal bone walls of the aesthetic maxillary region for immediate implant placement, based upon cone-beam computed tomography (CBCT) scans in a sample of adult patients. Methods: Two calibrated examiners analyzed a sample of 50 CBCT scans, performing morphometric analyses of both incisors and canines on the left and right sides. Subsequently, in the sagittal view, a line was traced through the major axis of the selected tooth. Then, a second line (E) was traced from the buccal to the palatal wall at the level of the observed bone ridges. The heights of the buccal and palatal bone ridges were determined at the major axis of the tooth. The buccal bone thickness was measured across five lines. The first was at the level of line E. The second was at the most apical point of the tooth, and the other three lines were equidistant between the apical and the cervical lines, and parallel to them. Statistical analysis was performed with a significance level of $P{\leq}0.05$ for the bone thickness means and standard deviations per tooth and patient for the five lines at varying depths. Results: The means of the buccal wall thicknesses in the central incisors, lateral incisors and canines were $1.14{\pm}0.65mm$, $0.95{\pm}0.67mm$ and $1.15{\pm}0.68mm$, respectively. Additionally, only on the left side were significant differences in some measurements of buccal bone thickness observed according to age and gender. However, age and gender did not show significant differences in heights between the palatal and buccal plates. In a few cases, the buccal wall had a greater height than the palatal wall. Conclusions: Less than 10% of sites showed more than a 2-mm thickness of the buccal bone wall, with the exception of the central incisor region, wherein 14.4% of cases were ${\geq}2mm$.

• Imaging Science in Dentistry
• /
• v.52 no.1
• /
• pp.75-82
• /
• 2022

Purpose: This cross-sectional study evaluated and categorized the tomographic sagittal root position (SRP) of the maxillary anterior teeth in a Brazilian population. Materials and Methods: Cone-beam computed tomographic scans of 420 maxillary anterior teeth of 70 patients (35 men and 35 women, mean age 25.2±5.9 years) were evaluated. The SRP was classified as class I, II, III, or IV. In class I, the root is positioned against the buccal cortical plate; in class II, the root is centered in the middle of the alveolar housing; in class III, the root is positioned against the palatal cortical plate; and in class IV, at least two-thirds of the root engage both the buccal and palatal cortical plates. Results: In total, 274 teeth (65.2%) were class I, 39 (9.3%) were class II, 3 (0.7%) were class III, and 104 (24.8%) were class IV. The frequency distribution over the teeth groups was different from the overall analysis. Important differences were found in the frequencies of classes I, II, and IV compared to other populations. Sex was not associated with the SRP classes (P=0.307). Age distribution was significantly different over the classes (P=0.004). Conclusion: The findings of this study on the distribution of SRP classes among the Brazilian population compared to other populations demonstrate that the SRP should be analyzed on a case-by-case basis for an accurate treatment plan in the maxillary anterior area.

• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.85-97
• /
• 1998

The purpose of this study was to observe the effects of sodium fluoride on the bony repair and regeneration processes after the rapid palatal expansion in the growing dogs. Eighteen dogs were divided into experimental and control groups. They were in the late mixed dentition. The rapid Palatal expansion was undertaken in all the animals($180^{\circ}$ turn/day) for ten days. The animals were sacrificed on 0, 15 and 45 days after the finish of expansion. One mg NaF/kg of body weight/day were given orally to the experimental group. Blood samples were drawn before and after expansion and the se겨m calcium, phosphate and alkaline phosphatase level were measured. The undecalcified bone section of midpalatal suture area was made, and observed under the light microscopy The results were as follows ; 1. The day after expansion, the infiltration of inflammatory cells were prominent and the new bone formation started at the edges of the two palatal plates bodering the midpalatal suture in both groups. Especially, the newly formed osteoid were very extensive and the osteoblasts lining the osteoid were very active in the experimental group. 2. At fifteen days after expansion, the active osteoblasts lining the osteold at the surface of trabecular bony spicules and active new bone formation were observed in the both groups. However, the cellular activity and new bone formation were more prominent In the experimental group. 3. At forty five days after expansion, the continuous osteoid and new bone formation and active osteoblasts were observed in the experimental group. But these phenomena were not observed in the control group. In the control group, the numerous osteoclasts were adjacent midpalatal suture and the bony remodeling process was begun. The serum alkaline phosphatase level was maintained highly in the experimental group, but decreased in the control. According to the above results, the author reached the conclusion that sodium fluoride has the stimulation effects on the osteoid production of the osteoblasts during the healing process after the rapid Palatal expansion more continuously.

• Journal of Periodontal and Implant Science
• /
• v.41 no.2
• /
• pp.60-66
• /
• 2011

Purpose: The aim of this study is to evaluate the buccal and lingual bone thickness in the anterior teeth and the relationship between bone thickness and the tissue biotype. Methods: Three male and two female human cadaver heads (mean age, 55.4 years) were used in this study. First, the biotype of periodontium was evaluated and categorized into a thick or a thin group. Next, full thickness reflections of the mandible and the maxilla to expose the underlying bone for accurate measurements in the anterior regions were performed. After the removal of the half of the alveolar bone, the probe with a stopper was used to measure the thickness of bone plate at the alveolar crest (AC), 3 mm apical to the alveolar crest (AC-3), 6 mm apical to the alveolar crest (AC-6), and 9 mm apical to the alveolar crest (AC-9). The thickness of the buccal plates at the alveolar crest were $0.97{\pm}0.18\;mm$,$0.78{\pm}0.21\;mm$, and $0.95{\pm}0.35\;mm$ in the maxillary central incisors, lateral incisors, and canines, respectively. The thickness of the labial plates at the alveolar crest were $0.86{\pm}0.59\;mm$, $0.88{\pm}0.70\;mm$, and $1.17{\pm}0.70\;mm$ in the mandibular central incisors, lateral incisors and canines, respectively. Conclusions: The thickness of the labial plate in the maxillary anteriors is very thin that great caution is needed for placing an implant. The present study showed the bone thickness of maxillary and mandibular anteriors at different positions. Therefore, these data can be useful for the understanding of the bone thickness of the anteriors and a successful implant placement.