• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.2
• /
• pp.114-124
• /
• 2009

In this paper, we propose a practical TCP friendly rate control scheme that considers the minimum channel bandwidth of the network when transporting SVC (scalable video coding) video over IP netowrks such as Internet. RTP and RTCP is mainly designed for use with UDP (User Datagram Protocol) for real-time video transport over the Internet. TCP-friendly rate control was proposed to satisfy the demands of multimedia applications while being reasonably fair when competing for bandwidth with conventional TCP applications. However the rate control model of the conventional TCP-friendly rate control scheme does not consider the minimum channel bandwidth of the network. Thus the estimated channel bandwidth by the conventional rate control model might be quite different from the real channel bandwidth when the packet loss ratio of the network is very large. In this paper, we propose a modified TCP-friendly rate control scheme that considers the minimum channel bandwidth of the network. Based on the modified TCP-friendly rate control, we assign the minimum channel bandwidth to the base layer bitstream of SVC video, and remaining available bandwidth is allocated to the enhancement layer of SVC video for the TCP friendly scalable video transmission. It is shown by simulations that the modified TCP-friendly rate control scheme can be effectively used for a wider range of controlled bit rates depending on the packet loss ratio than the conventional TCP-friendly control scheme. Furthermore, the effectiveness of the proposed scheme in terms of objective video quality is proved by comparing PSNR performance with the conventional scheme.

• Journal of Korea Multimedia Society
• /
• v.11 no.7
• /
• pp.1007-1015
• /
• 2008

In order to provide real-time data from sensors and instruments at manufacturing processes on web, we proposed a communication service model based on XML(eXtensible Markup Language). HTML(Hyper Text Markup Language) is inadequate for describing real-time data from manufacturing plants while it is suitable for display of non-real-time multimedia data on web. For applying XML-based web service of process data in Intranet environment, real-time performance of communication services was evaluated to provide the system design criteria. XML schema for the data presentation was proposed and its communication performance was evaluated by simulation in terms of transmission delay due to increased message length and processing delay for transformation of raw data into defined format. For transformation of raw data into XML format, we proposed two structures: one is the scheme where transformation is done at an SCC(Supervisory Control Computer) after receiving real-time data from instruments. the other is the scheme where transformation is carried out at instruments before the data are transmitted to the SCC. Performances of two structures were evaluated on a testbed under various conditions such as six packet sizes and offered loads of 20%, 50% and 80%, respectively. Test results show that proposed schemes are applicable to the systems in Ethernet 100BaseT network if total message traffic is less than 7 Mbps.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.1
• /
• pp.177-182
• /
• 2014

In this paper, we propose an energy efficient sink node based MAC protocol for Wireless Sensor Networks (WSNs). The proposed sink node-based MAC (SB-MAC) protocol uses a RB(rapid beacon) frame to save sender's energy consumption and to reduce transmission delay. The RB frame is a modified IEEE 802.15.4 beacon frame. The RB frame contains the length of the sender nodes data. Using this information other nodes except sender and receiver nodes can be stay sleep mode long time to reduce energy consumption. Results have shown that the SB-MAC protocol outperformed other protocols like X-MAC and RI-MAC in terms of packet delivery delay and energy consumption. The SB-MAC protocol is especially energy efficient for the networks with one sink node and many senders.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.4 s.346
• /
• pp.22-30
• /
• 2006

In this paper, the goal of our proposed algorithm is to reduce link -failure and route failure caused by dead nodes which consume all of the battery life. I propose an algorithm which provides a ability of changing mutes to neighbor nodes before some of intermediate nodes be shutting don to get the stable route maintenance. To achieve this goal, The proposed routing algerian uses additional new messages to check energy status for monitoring energy of neighbor nodes and to change the path to a neighbor node. From extensive simulations, results show that possibility of cut-offs and time-delay cause of packet-loss have been decreased and also the improvement of transmission effectiveness.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.3
• /
• pp.196-201
• /
• 2013

In this paper, we propose an asynchronous and adaptive message passing scheme based on S-MAC for handling with the problem on energy efficiency in wireless sensor networks. The proposed scheme consists of a policy that differentiate transmission errors caused by packet collision or radio interference from congestion errors caused by buffer overflow and a method that adaptively controls the size of a fragment according to the variance of traffic loads. Especially, it presents a method that highly reduce the energy consumption by keeping the size of fragment not being excessively smaller than the one that may result in rapid increment of the total transfer time. Finally, with the simulation results we show that network throughput and delay are improved by using the proposed message passing scheme.

• Journal of Korea Multimedia Society
• /
• v.15 no.4
• /
• pp.516-525
• /
• 2012

In this paper, an efficient technique for enhancing the QoS of multimedia service for an WiMedia network applying distributed cooperative medium access (D-MAC) protocol is proposed. D-MAC protocol has been proposed to support high-rate Wireless Personal Area Networks (HR-WPANs) by the WiMedia Alliance. Unlike the centralized IEEE 802.15.3 MAC, the D-MAC UWB specified by WiMedia supports all devices to be self-organized and removes the SOP (Simultaneous Operating Piconet) problem, i.e., packet collisions between overlapped piconets in the centralized IEEE 802.15.3 MAC. However the WiMedia D-MAC can't prevent reduce the throughput degradation occurred by mobile nodes with low data rate. Therefore, a distributed cooperative MAC protocol for multi-hop UWB network is proposed in this paper. The proposed technique can intelligently select the transmission path with higher data rate to provide real-time multimedia services with minimum delay, thus enhances QoS of multimedia service.

• Journal of KIISE:Information Networking
• /
• v.35 no.4
• /
• pp.337-344
• /
• 2008

Underwater acoustic sensor networks exhibit characteristics such as high propagation delay and low data rates, which are different from those of terrestrial wireless networks. Therefore, the conventional protocols used in wireless networks can be restrictive and inefficient when applied to underwater acoustic sensor networks. In this paper, we propose a medium access control protocol (MAC) to enhance the energy efficiency and throughput in underwater acoustic sensor networks. The proposed protocol employs a slot-based competition mechanism that reserves a time slot to send a data packet in advance. In the proposed protocol, collision between nodes can occur due to competition to obtain a slot. However, the proposed protocol minimizes the collisions between nodes because the nodes store the reservation information of the neighboring nodes, this reduces unnecessary energy consumption and increases throughput. We perform a simulation to evaluate the performance of the proposed protocol with regard to the energy consumption, the number of collision, channel utilization, throughput and transmission delay. We compare the proposed protocol with the conventional protocol, and the performance results show that the proposed protocol outperforms the conventional protocol.

• Journal of KIISE
• /
• v.42 no.6
• /
• pp.807-816
• /
• 2015

The Internet of Things (IoT) has recently been showered with much attention worldwide. Various kinds of devices, communicating with each other in the IoT, demand multiple communication technologies to coexist. In this environment, mobile devices may utilize the vertical handover between different wireless radio interfaces such as Wi-Fi and Bluetooth, for efficient data transfer. In this paper, an IoT broker is implemented to support the vertical handover, which can also support and manage heterogeneous devices and communication interfaces. The handover is activated based on RSSI, Link Quality values, and real time traffic. The experimental results show that the proposed handover system substantially improves QoS in Bluetooth and reduces power consumption in mobile devices as compared with a system using only Wi-Fi.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2387-2394
• /
• 2016

It is important to select the most appropriate channel for efficient transmission of massive data in wireless sensor network. In the fixed channel method for wireless sensor node, shortage of frequency may be a major constraint to support a variety of environments. In this paper, the method that seeks common channels between two nodes without common control channels in the existing wireless cognitive radio network is introduced in order to use efficiently the channel of wireless sensor network. The problem of existing method shows the severe degradation of performance that is caused by interference of linkage between selected channels, so that the sequential algorithm is suggested to improve the performance. From the results of computer simulation, the suggested method shows that the link can be set 50% faster than the other methods as the number of links increases because the beacon packet waiting time caused by the interference decreases remarkably.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.9
• /
• pp.814-821
• /
• 2012

We propose a network processor called an OmniFlow processor capable of wire-speed flow management by a hardware-based flow admission control(FAC) in this paper. Because the OmniFlow processor can set up and release a wire-speed connection for flows, the update period of flows can be set to a short time, and only active flows can be effectively managed by terminating a flow that does not have a packet transmitted within this period. Therefore, the FAC can be used to provide a reliable transmission of UDP as well as TCP applications. This processor is fabricated in 65nm CMOS technology, and total gate count is 25 million. It has 40 Gb/s throughput performance in using the 32 RISC cores when maximum operating frequency is 555MHz.