• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9B
• /
• pp.1039-1048
• /
• 2011

Carrier Ethernet, which extend The algorithm based on constructing the mixed topology and performing link stretching, MT/s, has been proposed for designing cost-efficient Carrier Ethernet in optical network with multi-line-rate. However, the MT/s algorithm has high blocking ratio because the wavelength capacity is fully allocated without considering the load balance of network. In this paper, we propose an efficient mixed topology configuration (EMTC) algorithm by modifying MT/s algorithm. In order to reduce blocking ratio, we adapt a threshold for each link to restrict the link utilization so that traffic load can be distributed over whole network. We also apply the EMTC algorithm into optical hybrid switched network to evaluate the availability of our algorithm for different applications. The performance of the EMTC algorithm is compared with that of MT/s algorithm through OPNET simulation. The simulation results show that our algorithm achieve lower blocking ratio than the MT/s algorithm. Moreover, in hybrid switched network, our algorithm performs better than MT/s algorithm in terms of packet loss ratio and end-to-end delay.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.11
• /
• pp.256-264
• /
• 2020

Industrial Wireless Sensor Networks (IWSNs) is exploited to achieve various objectives such as improving productivity and reducing cost in the diversity of industrial application, and it has requirements such as low-delay and high reliability packet transmission. To accomplish the requirement, the network manager performs graph construction and resource allocation about network topology, and determines the transmission cycle and path of each node in advance. However, this network management scheme cannot treat mobile devices that cause continuous topology changes because graph reconstruction and resource reallocation should be performed as network topology changes. That is, despite the growing need of mobile devices in many industries, existing scheme cannot adequately respond to path failure caused by movement of mobile device and packet loss in the process of path recovery. To solve this problem, a network management scheme is required to prevent packet loss caused by mobile devices. Thus, we analyse the location and movement cycle of mobile devices over time using machine learning for predicting the mobility pattern. In the proposed scheme, the network manager could prevent the problems caused by mobile devices through performing graph construction and resource allocation for the predicted network topology based on the movement pattern. Performance evaluation results show a prediction rate of about 86% compared with actual movement pattern, and a higher packet delivery ratio and a lower resource share compared to existing scheme.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.11
• /
• pp.1225-1230
• /
• 2015

MAC protocol for WBAN performs CSMA/CA(:Carrier Sense Multiple Access with Collision Avoidance)algorithm that handles traffic which occurs in emergency with top priority in order to deal with variable data of sensor node for medicine. Emergency message that node sends undergoes collision and delay of transmission by retransmission of emergency message and waste of energy by retransmission. This paper suggests algorithm that minimizes loss of frame caused by collision and applies different backoff parameters by setting order of priority between MAC instruction frame and data frame in CSMA/CA algorithm case which applies order of priority queuing to improve aforementioned problem. According to performance evaluation, it has been found that using suggested MAC protocol showed lower collision probability, higher packet transmission processing ratio and lower packet loss compared with using IEEE 802.15.6.

• The KIPS Transactions:PartC
• /
• v.16C no.2
• /
• pp.237-244
• /
• 2009

The congestion in wireless sensor network increases the ratio of data loss and causes the delay of data. The existing congestion protocols for wireless sensor network reduces the amount of transmission by control the sampling frequency of the sensor nodes related to the congestion when the congestion has occurred and was detected. However, the control method of sampling frequency is not applicable on the situation which is sensitive to the temporal data loss. In the paper, we propose a new congestion control, ACT - Adaptive Congestion conTrol. The ACT monitors the network traffic with the queue usage and detects the congestion based on the multi level threshold of queue usage. Given network congestion, the ACT increases the efficiency of network by adaptive flow control method which adjusts the frequency of packet transmission and guarantees the fairness of packet transmission between nodes. Furthermore, ACT increases the quality of data by using the variable compression method. Through experiment, we show that ACT increases the network efficiency and guarantees the fairness to sensor nodes compared with existing method.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.3
• /
• pp.57-66
• /
• 2011

The current trend of the handover authentication delay time is gradually increased according to the interworking between 3G cellular network and WLANs. Therefore, authentication mechanism minimized in delay is required to perform the seamless handover and support the inter-subnet and inter-domain handover. In this paper, we propose a novel pre-authentication scheme based on the fast channel switching which directly performs the authentication with the next access point in advance. In addition, the proposed scheme is efficient in the inter-domain handover and can be easily implemented in current WLANs since it just modifies the client side of user. To analysis and evaluate our scheme, we compare the packet loss ratio and the delay time with the two standard 802.11 authentication schemes. The analytical results show that our scheme is approximate 10 times more effective than the standard schemes in packet loss and the delay time is minimized down to 0.16 msec.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12C
• /
• pp.199-207
• /
• 2001

We propose an adaptive shaping controller equipped with the technologies of shaping and buffering VoIP packets arriving at the receiving end by the CAM-type controller. In order to conceal interarrival packet delay variation, the conventional jitter buffers force them to be too large, thereby causing the audio quality to suffer excessive delay. However, by using our proposed method, the delay caused by shaping operation dynamically increases or decreases on the level of jitter that exists with in the IP network. This makes the delay accommodates adaptively the network jitter condition. The less jitter network has the fewer delay the shaping controller requires for jitter elimination. And the CAM-type method generally makes the shaping operation faster and leads to processing packets in as little time as can. We analyse the packet loss and delay performance dependency on the average talk ratio and the number of jitter buffer entries in shaping controller. Surprising, we show that the average delay using our shaping controller is about 70msec. This performance is much better than with the delay equalization method which forces the receiving end to delay about 60msec.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1541-1548
• /
• 2012

This paper proposes a new multipath-based routing protocol on MANETs with Fast-Recovery of failures. The proposed protocol establishes the primary and secondary paths between a source and a destination considering the end-to-end packet reception reliability of routes. The primary path is used to transmit messages, and the secondary path is used to recover the path when detecting failures on the primary path. If a node detects a link failure during message transmission, it can recover the path locally by switching from the primary to the secondary path. By allowing the intermediate nodes to recover locally the route failure, the proposed protocol can reduce the number of packet loss and the amount of control packets for setting up new paths. The simulation result using QualNet simulator shows that the proposed protocol was about 10-20% higher than other protocols in terms of end-to-end message delivery ratio and the fault recovery time in case of link fault was about 3 times faster than the other protocols.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.8
• /
• pp.1384-1390
• /
• 2008

The TCP protocol is originally designed for wired network, however it performs very poor in wireless network due to different nature of wireless network from wired networks. In terms of TCP performance improvement in wireless Ad-hoc network, many researches show that small congestion window size of TCP connection can improve TCP performance. We propose a new TCP algorithm to improve TCP performance in wireless Ad-hoc network. The basic idea of our approach is that TCP receiver estimates the optimum window size and then sets congestion window limit of TCP sender to an optimum value by using the advertised window field in TCP ACK packet. From extensive computer simulation, the proposed algorithm shows superior performance than traditional TCP protocols in terms of packet delivery ratio and packet loss.

• The KIPS Transactions:PartC
• /
• v.12C no.5 s.101
• /
• pp.617-622
• /
• 2005

Lately, the MANET research has focused on providing routing services with security and previous schemes have been proposed for detecting malicious nodes in a MANET. However, they still include some problems which malicious nodes cannot be found when they falsely report other nodes as malicious. Accordingly, we propose a novel and efficient scheme for detecting malicious nodes using report messages and a report table which is consisted of node ID both for suspecting and reporting when the malicious nodes behave normally during the route discovery, but the other hand they drop and modify packets, or falsely report other nodes as malicious during the data transmission. Our proposed scheme is applicable to not only DSR but aiso AODV. And we provide some simulation results of our proposed scheme by comparing general AODV with our proposed scheme. Simulation results show that our Proposed scheme outperforms general AODV in terms of average packet loss ratio and packet delivery ratio.

• ETRI Journal
• /
• v.26 no.5
• /
• pp.375-383
• /
• 2004

This paper proposes a common interleaving method associated with independent channel-encoding among transmitter antenna branches in orthogonal frequency and code division multiplexing based on multiple-input multiple-output (MIMO) multiplexing to achieve an extremely high throughput such as 1 Gbps using a 100 MHz bandwidth. This paper also investigates the average packet error rate performance as a function of the average received signal energy per bit-to-background noise power spectrum density ratio $(E_b/N_0)$. We found that the loss in the required average received $E_b/N_0$ of the proposed method is only within approximately 0.3 dB in up to a 12-path Rayleigh fading channel, using 16QAM and Turbo coding with a coding rate of 5/6. We also clarify that even for a large fading correlation among antenna branches, 1 Gbps is still possible by increasing the transmission power. Therefore, the proposed method reduces the processing rate to 1/4 in the turbo decoder with only a slight loss in the required average received $E_b/N_0$.