• Journal of Sensor Science and Technology
• /
• v.6 no.3
• /
• pp.194-199
• /
• 1997

When voltage or current gets out of the magnetic sensor as it is, we have often faced the problems such as introduction of noise and loss of voltage. In order to reduce these problems, a 2 drain MAGFET operating in the saturation region and fabricated by CMOS process, the system of I/V converter, VCO with operational amplifier, and V/F conversion circuits with Schmitt Trigger are designed and fabricated in one package. The absolute sensitivity of magnetic sensor shows 1.9 V/T and the product sensitivity is $3.2{\times}10^{4}\;V/A{\cdot}T$. The characteristic of V/F conversion is very stabilized and has the value of 190 kHz/T.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.1
• /
• pp.91-98
• /
• 2010

The increasing of power and processing speed and miniaturization of central processor unit (CPU) used in electronics equipment requires better performing thermal management systems. A typical thermal management package consists of thermal interfaces, heat dissipaters, and external cooling systems. There have been a number of experimental techniques and procedures for estimating thermal conductivity of thin, compressible thermal interface material (TIM). The TIM performance is affected by many factors and thus TIM should be evaluated under specified application conditions. In compact packaging of electronic equipment the chip is interfaced with a thin heat spreader. As the package is made thinner, the coupling between heat flow through TIM and that in the heat spreader becomes stronger. Thus, a TIM characterization system for considering the heat spreader effect is proposed and demonstrated in detail in this paper. The TIM test apparatus developed based on ASTM D-5470 standard for thermal interface resistance measurement of high performance TIM, including the precise measurement of changes in in-situ materials thickness. Thermal impedances are measured and compared for different directions of heat dissipation. The measurement of the TIM under the practical conditions can thus be used as the thermal criteria for the TIM selection.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.178-178
• /
• 2009

전자제품의 고속화, 고집적화, 고성능이 요구되어짐에 따라 IC's 성능 향상을 통해 패키징 기술의 소형화를 필요로 하고 있어 소재나 칩 부품을 이용해 커패시터나 저항을 구현하여 내장시키는 임베디드 패시브 기술에 대한 연구가 많이 진행되어 지고 있다. 본 연구에서는 3D 패키징이 가능한 flexible 소재에 능, 수동 소자를 내장하기 위한 다층 flexible 기판 공정 기술에 대한 연구를 수행하였다. 기판제작을 위해 flexible 소재에 미세 형성이 가능한 폴리머 필름을 접착하였고 flexible 위에 후막 저항체 패턴을 퍼|이스트를 이용하여 형성하였다. 또한, 능동소자 내장을 위해 test chip을 제작하여 플립칩 본더를 이용해 flexible 기판에 접합한 후에 bonding film을 이용한 build up 공정을 통해 via를 형성하고 무전해 도금 공정을 거쳐 전기적인 연결을 하였다. 위의 공정을 통해 앓고 가벼울 뿐만 아니라 자유롭게 구부러지는 특성을 갖고 있는 능, 수동 소자 내장형 flexible 기판의 변형에 따른 전기적 특성을 평가하였다.

• Korean Journal of Organic Agriculture
• /
• v.14 no.3
• /
• pp.251-266
• /
• 2006

This study was surveyed and analyzed in 2005 year for environmentally-friendly rice's production 78 farmers in korea. The major results was as follows: The average age of farmers were 54 years old, the experiences of environmentally-friendly rice's production farms was 7.4 years, the cultivated scales of environmentally-friendly rice's production was 3.4ha. The 74%'s Farmers of all unified rice's breeds for rice's production of high-grade in quality, the ranking of rice's breeds selection were the high-grade rice's breeds of government>japan rice's breeds. The control of damage by blight and insects were needed environmentally-friendly control, the endured study of this control were very important. To cut down cost of the environmentally-friendly rice for income security of farmers and sustenance of farming will. To receive reasonable price of environmentally-friendly rice, the brand image were raised to consumers, the variety and miniaturization of rice packaging unit were needed in view of consumers. In addition to must be campaigns of publicity through the press and event to consumers, were managed the exchange of rice goods and exchanged e-mail together consumers for the maintenance of confidence. To drive direct marketing between environmentally-friendly rice farmers and consumers through experiential marketing, to diversify the marketing channel. To strengthen public relations at regional level and relationship at the consumers.

• Environmental Mutagens and Carcinogens
• /
• v.18 no.1
• /
• pp.15-21
• /
• 1998

Transgenic animal and cell line models which are recently developed and used in toxicology fields combined with molecular biological technique, are powerful tools to study the mechanism of mutation in vivo and in vitro, respectively. Transgenic models, which have exogenous DNA incorporated into their genome, carry recoverable shuttle vector containing reporter genes to assess endogenous effects or alteration in specific genes related to disease processes. The lac I and lac Z gnee most widely used as a mutational target in transgenic systems. The assay is performed by treatment with putative mutagenic agents, isolation of genomic DNA from cells or tissues, exposure the isolated DNA to in vitro packaging extract, plating and sequencing. The results from these processes provide not only mutant frequency as quantitative evaluation but also mutational spectrum as qualitative evaluation of various agents. Therefore we introduce and review the principle, detailed procedure and application of transgenic mutagenesis assay system in toxicology fields especially in mutagenesis and carcinogenesis.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.67
• /
• pp.187-208
• /
• 2015

The Korea China FTA was signed on June 1 2015. It includes some concessions regarding major export items in the manufacturing sector for the protection of primary industries and preferential tariffs for a number of products produced in the Kaesong Industrial Complex. Primary industries are what the Korean government paid the greatest attention to. Rice was excluded from the negotiations from the get go, and was joined by 548 other food items including pork, apples, pears, beef, chili, garlic etc. These foodstuffs account for about one-third of the agricultural and livestock products that Korea produces, and are not going to be subject to tariff elimination. The results of the study are as follows: Korean government policy is to maintain of agri-food export support system, eliminate of agri-food non-tariff barriers, foster of agri-food export SMEs and expand of investment of foreign agri-food company. Korean firms strategy is to establish of regional marketing strategy, ensure of high quality agri-food and develop of food packaging technologies, establish of agri-food export logistics center and take advantage of the FTA preferential tariff.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.939-944
• /
• 2007

Generally, development of a robot capable of fast movements or high payloads is progressed by the analysis of dynamic characteristics, DOF positioning, actuator selection, structure of links, and so on. This paper highlights the design of a robot manipulator handled by a human for man-machine cooperation. The requirements of the proposed system include its having multi-DOF(Degree of Freedom)and the capacity for a high payload in the condition of its maximum reach. The primary investigation factors are motion range, performance within the motion area, and reliabilityduring the handling of heavy materials. Traditionally, the mechanical design of robots has been viewed as a problem of packaging motors and electronics into a reasonable structure. This process usually transpires with heavy reliance of designerexperience. Not surprisingly, the traditional design process contains no formally defined rules for achieving desirable results, as there is little opportunity for quantitative feedback during the formative stages. This work primarily focuses on the selection of proper joint types and link lengths, considering a specific task type and motion requirements of the heavy material handling.

• Journal of the Optical Society of Korea
• /
• v.12 no.1
• /
• pp.38-41
• /
• 2008

Precise micropatterning of polypropylene film, which is highly transparent in the wavelength range over 250 nm has been demonstrated by 355 nm nano/picosecond laser and 785 nm femtosecond laser. Increments of both the pulse energy and the shot number of pulses lead to cooccurrence of photochemical and thermal effects, demonstrated by the spatial expansion of rim on the surface of PP. The shapes of the laser-ablated polypropylene films were imaged by optical microscope and measured by a 3D optical measurement system. And, the ablation depth and width of polypropylene film ablated by femtosecond laser at various pulse energy and pulse number were characterized. Our results demonstrate that a femtosecond pulsed laser is an efficient tool for fabricating micropatterns of polypropylene films, where the micropatterns are specifically tailored in size, location and number easily controlled by laser processing conditions.

• 전자공학회논문지 IE
• /
• v.48 no.4
• /
• pp.30-39
• /
• 2011

This paper proposed a new concept of information space called Smart Floor. Smart Floor is an intelligent space where a mobile robot can read and write specific information through Radio Frequency IDentification (RFID) tags which are mounted on Smart Floor to drive its goal position. RFID tag packaging technology is described for building Smart Floor. Also a mobile robot equipped passive RFID System with ultra high frequency (UHF) bandwidth has developed. The information that consists of an absolute position in the Smart Floor and desired direction saved on RFID tags is a simulated Q-value based on Q-learning algorithm. Proposed Smart Floor will be a proper method to communicate between space and robot.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.64-71
• /
• 2012

An efficient cooling system is an essential part of the electronic packaging such as a high-luminance LED lighting. A special technology, Pulsating Heat Pipe (PHP), can be applied to improve cooling of a sealed, explosion-proof LED light fixture. In this paper, the characteristics of the pulsating heat pipes in the imposed thermal boundary conditions of LED lightings were experimentally investigated and a PHP device that works free of alignment angle was investigated for cooling of explosion-proof LED lights. Five working fluids of ethanol, FC-72, R-123, water, and acetone were chosen for comparison. The experimental pulsating heat pipe was made of copper tubes of internal diameter of 2.1 mm, 26 turns. A variable heat source of electric heater and an array of cooling fins were attached to the pulsating heat pipe. For the alignment of the heating part at bottom, an optimum charging ratio (liquid fluid volume to total volume) was about 50% for most of the fluids and water showed the highest heat transfer performance. For the alignment of the heating part on top, however, only R-123 worked in an un-looped construction. This unique advantage of R-123 is attributed to its high vapor pressure gradient. Applying these findings, a cooling device for an explosion-proof type of LED light rated 30 W was constructed and tested successfully.