• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.75-82
• /
• 2019

Flexible solar cells have attracted enormous attention in recent years due to their wide applications such as portable batteries, wearable devices, robotics, drones, and airplanes. In particular, the demands of the flexible silicon and compound semiconductor solar cells with high efficiency and high reliability keep increasing. In this study, we fabricated a flexible InGaP/GaAs double-junction solar module. Then, the effects of the wind speed and ambient temperature on the operating temperature of the solar cell were analyzed with the numerical simulation. The temperature distributions of the solar modules were analyzed for three different wind speeds of 0 m/s, 2.5 m/s, and 5 m/s, and two different ambient temperature conditions of 25℃ and 33℃. The flexibility of the flexible solar module was also evaluated with the bending tests and numerical bending simulation. When the wind speed was 0 m/s at 25 ℃, the maximum temperature of the solar cell was reached to be 149.7℃. When the wind speed was increased to 2.5 m/s, the temperature of the solar cell was reduced to 66.2℃. In case of the wind speed of 5 m/s, the temperature of the solar cell dropped sharply to 48.3℃. Ambient temperature also influenced the operating temperature of the solar cell. When the ambient temperature increased to 33℃ at 2.5 m/s, the temperature of the solar cell slightly increased to 74.2℃ indicating that the most important parameter affecting the temperature of the solar cell was heat dissipation due to wind speed. Since the maximum temperatures of the solar cell are lower than the glass transition temperatures of the materials used, the chances of thermal deformation and degradation of the module will be very low. The flexible solar module can be bent to a bending radius of 7 mm showing relatively good bending capability. Neutral plane analysis was also indicated that the flexibility of the solar module can be further improved by locating the solar cell in the neutral plane.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.760-766
• /
• 2016

This study explored the effects of heating temperature and laminae thicknesses on the time required to heat the center of air-dried Paulownia tomentosa, Pinus sp., Abies sp., and Larix sp. laminae to $56^{\circ}C$, which is a minimum core temperature of wood packaging materials defined by ISPM 15 standard, and maintain for 30 minutes in dry heat treatment schedule. Heating times were different among wood species and were Pinus sp. ${\geq}$ Abies sp. > Paulownia tomentosa > Larix sp. in decreasing order. The differences in heating times of some species were significantly different statistically, but were not different enough in practical terms to warrant heating four species separately. Heating times decreased as heating temperature increased and followed approximately power-function relationship. Also, heating times increased linearly with increasing laminae thickness. These relationships make it possible to calculate intermediate heating times relative to experimentally observed heating times. The results of this study will serve as a guideline for heat sterilization of Chinese laminae species to meet heat treatment requirements for protection against invasive pests.

• Agribusiness and Information Management
• /
• v.9 no.2
• /
• pp.1-11
• /
• 2017

Introduction: To analyze the impact of marketing losses on efficiency in transacting banana in Kurnool district of SRZ in Andhra Pradesh and to assess the opinions of the farmers on the constraints in transacting banana. Research back ground, Materials and Methods: The study relies exclusively on primary information obtained from the banana farmers of Kurnool District. Purposive sampling procedure was followed for the selection of the study area. Top two mandals in the district and top two villages in each mandal are selected in accordance with the area under cultivation of banana. Probability proportion to size was followed regarding the selection of sample farmers and accordingly 60 marginal, 37 small and 23 other farmers were selected and thereby, the total sample size was 120. Result and Discussion: Three marketing channels were identified in the marketing of banana in Kurnool district viz., Producer ${\rightarrow}$ Local-exporter ${\rightarrow}$ Wholesaler ${\rightarrow}$ Retailer ${\rightarrow}$ Consumer (Channel-I), Producer ${\rightarrow}$ Wholesaler ${\rightarrow}$ Cart-vendor ${\rightarrow}$ Consumer (Channel-II) and Producer ${\rightarrow}$ Juice-holder ${\rightarrow}$ Consumer (Channel-III). With the inclusion of marketing losses in the price spread analysis of banana in all the three channels, the marketing costs of all the intermediaries were increased and thereby, the farmer's share in consumer's rupee and Net Marketing Margins of the agencies are on the decline. So, without inclusion of marketing losses, the farmer's share in consumer's rupee and Net Marketing Margins of all the agencies are overvalued. The higher the marketing losses, the more is the negative impact on farmer's net selling price, net marketing margins of the intermediaries and marketing efficiency. The sample farmers are facing major problems in marketing of banana like frequent price fluctuations, unorganized marketing and lack of transportation facilities on priority basis. Suggestions: It is suggested to educate the farmers regarding the optimum maturity index for harvest, use of mechanical harvesters, proper placement of fruits during storage and ripening, better packaging and cushioning technologies to absorb shocks during transportation, strengthening of storage facilities and transport facilities, encourage co-operative marketing etc., to promote marketing efficiency of banana in the study area.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.4
• /
• pp.1092-1098
• /
• 2012

Aroma compounds in sun-dried salt according to saltern material and packaging box were extracted by the headspace and were isolated by using GC-MS. These compounds were identified including ketones, heterocyclic compounds and six other compounds. Major aroma compounds in salts were identified as 4-methyl-2-pentanone, 5-methyl-3-hexanone, 4-methyl-3-penten-2-one, 2-hexanol, benzothiazole, 2,4-bis(1,1-dimethylethyl)-phenol, and 1,3,5-tri-tert-butyl benzene. However, we found no significant differences according to the saltern materials in three salts. Salts stored in Chamaceyparis obtusa (Sieb. et Zucc.) had more diverse aroma profiling than those in Pinus densiflora and Paulownia coreana. We consider that it need to research the development of high value added products for new aromatic salt.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.6
• /
• pp.457-463
• /
• 2014

This study was carried out to find out major factors to mitigate carbon emission using Life Cycle Assessment (LCA). System boundary of LCA was confined from sowing to packaging during vegetable production. Input amount of agri-materials was calculated on 2007 Income reference of white radish, chinese cabbage and chive produced at open field and film house published by Rural Development Administration. Domestic data and Ecoinvent data were used for emission factors of each agri-material based on the 1996 IPCC guideline. Carbon footprint of white radish was 0.19 kg $CO_2kg^{-1}$ at open fields, 0.133 kg $CO_2kg^{-1}$ at film house, that of chinese cabbage was 0.22 kg $CO_2kg^{-1}$ at open fields, 0.19 kg $CO_2kg^{-1}$ at film house, and that of chive was 0.66 kg $CO_2kg^{-1}$ at open fields and 1.04 kg $CO_2kg^{-1}$ at film house. The high carbon footprint of chive was related to lower vegetable production and higher fuel usage as compared to white radish and Chinese cabbage. The mean proportion of carbon emission was 35.7% during the manufacturing byproduct fertilizer; white radish at open fields was 50.6%, white radish at film house 13.1%, Chinese cabbage at outdoor 38.4%, Chinese cabbage at film house 34.0%, chive at outdoor 50.6%, and chive at film house 36.0%. Carbon emission, on average, for the step of manufacturing and combustion accounted for 16.1% of the total emission; white radish at open fields was 4.3%, white radish at film house 15.6%, Chinese cabbage at open fields 6.9%, Chinese cabbage at film house 19.0%, chive at open fields 12.5%, and chive at film house 29.1%. On the while, mean proportion of carbon footprint for the step of $N_2O$ emission was 29.2%; white radish at open fields was 39.2%, white radish at film house 41.9%, Chinese cabbage at open fields 34.4%, Chinese cabbage at film house 23.1%, chive at open fields 28.8%, and chive at film house 17.1%. Fertilizer was the primary factor and fuel was the secondary factor for carbon emission among the vegetables of this study. It was suggested to use Heug-To-Ram web-service system, http://soil.rda.go.kr, for the scientific fertilization based on soil testing, and for increase of energy efficiency to produce low carbon vegetable.

• Journal of Environmental Health Sciences
• /
• v.39 no.5
• /
• pp.408-417
• /
• 2013

Objectives: Phthalates are used as plasticizers in polyvinyl chloride (PVC) plastics. As phthalate plasticizers are not chemically bound to the PVC, they can leach, migrate or evaporate into indoor air and atmosphere, foodstuffs, other materials, etc. Therefore, humans are exposed through ingestion, inhalation, and dermal exposure over their entire lifetime, including during intrauterine development. In particular, university students have a great number of opportunities to contact products including phthalates during campus life (food packaging, body care products, cosmetic, lotions, aftershave, perfume etc.). The purpose of this study was to examine levels of phthalate exposure as undergraduate students begin to use pharmaceuticals and personal care products including phthalates. Methods: Phthalate metabolites, mono-ethyl phthalate (MEP), mono-n-butyl phthalate (MnBP), mono-isobutyl phthalate (MiBP), mono-2- ethylhexyl phthalate (MEHP), {(mono-(2-ethyl-5-hydroxyhexyl) phthalate (MEHHP}, and mono-(2-ethlyl-5-oxohexyl) phthalate (MEOHP} were examined. 80 urine samples collected from university students were analyzed using LC/MS/MS(API 4000, Applied Bioscience) with on-line enrichment and columnswitching techniques. This study was carried out at Y university located in Gyonggi Province from 2008 to 2011. Results: The detection limit of phthalate metabolites were 0.03 ng/mL for MEP, 0.11 ng/mL for MnBP, 0.08 ng/mL for MiBP, 0.93 ng/mL for MEHP, 0.19 ng/mL for MEOHP and 0.16ng/mL for MEHHP. MnBP showed the highest urinary levels (median: 31.6 ug/L, 24.8 ug/g creatinine (cr)). Concentrations were also high for MEHHP (median: 24.1 ug/L, 19.0 ug/g cr), followed by MEOHP (median: 22.8 ug/L, 17.9 ug/g cr). In individual cases, the maximum level reached up to 348 ug/L, and 291 ug/g cr, respectively. The urinary and creatinine adjusted levels of MEP were lower than those for DBP and DEHP metabolites, but were higher in 95th percentiles. As a result, the mean daily DEP intake value was 2.3 ${\mu}g/kg$ bw/day, 3.5 ${\mu}g/kg$ bw/day for DEHP and 4.9 ${\mu}g/kg$ bw/day for DBP. Conclusion: These students' phthalate exposure levels were below the international safe level set by the EU, but higher than the 2012 KFDA survey of the age group from 3 to 18.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.185-195
• /
• 2011

Aircraft-related accidents cause mass casualties and major material damages. At present, runway-related accidents in our country account for 28% of all air accidents. Furthermore, internationally 33% of all air accidents is connected with runway. To prevent these accidents, FAA mandates the installation of aircraft rapid arresting system(ARAS) at the runway end safety areas which do not meet the FAA requirements. Even if the areas satisfy the conditions, FAA recommends the installation of ARAS to ensure the safety. In accordance of the international affairs, the domestic studies for ARAS are in progress and the legal formalities for domestic adoption of ARAS is under way. In this study, we analyzed the stopping distance, drag force, vertical force and tire penetration of runway overrun to assess the performance of ARAS reasonably by using two different kinds of analysis programs. The first is ARRESTOR program adopted by FAA, and the second is LS-DYNA which is available for 3-dimensional nonlineal dynamic analysis. As a result, analytically the stopping distances between two programs are similar. The drag force is rather different, but the tendencies are similar. Later on, the 3-dimensional simulation analysis considering various air-craft condition and properties of packaging materials is necessary. In addition, ongoing development of simulation analysis program is required for more accurate analistic results.

• Toxicological Research
• /
• v.26 no.4
• /
• pp.285-291
• /
• 2010

Recently, reproductive and neurobehavioral effects of bisphenol A (BPA) have been documented, and thus a review was requested for BPA management direction by the government. Therefore, this study was performed to establish a Korean tolerable daily intake (TDI) for BPA. An expert committee, consisting of specialists in fields such as toxicology, medicine, pharmacology, and statistics, was asked to evaluate BPA health based guidance values (HbGVs). Although many toxicological studies were reviewed to select a point of departure (POD) for TDI, rat and mouse reproductive studies by Tyl et al. (2002, 2006), which were performed according to GLP standards and OECD guidelines, were selected. This POD was the lowest value determined from the most sensitive toxicological test. The POD, a NOAEL of 5 mg/kg bw/day, was selected based on its systemic toxicity as critical effects. An uncertainty factor of 100 including interspecies and intraspecies differences was applied to calculate the TDI. According to the evaluation results, a TDI of BPA for Korean was suggested at 0.05 mg/kg bw/day. In addition, the BPA exposure level based on food consumption by the Korean population was estimated as 1.509 ${\mu}g/kg$ bw/day, and the HI was evaluated at 0.03 when the TDI of 0.05 mg/kg bw/day was applied. This HI value of 0.03 indicated that hazardous effects would not be expected from BPA oral exposures. Although highly uncertain, further studies on low dose neurobehavioral effects of BPA should be performed. In addition, it is recommended that the 'as low as reasonably achievable' (ALARA) principle be applied for BPA exposure from food packaging materials in newborn infants and children.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6925-6931
• /
• 2015

LED(Light Emitting Diode) is used in various filed like a display because of low power consuming, long life span, high brightness, rapid response time and environmental-friendly characteristic. General fabrication method is combination blue light LED chip with yellow fluorescent substance. Because this way is suitable for industry field in terms of convenience, economic, efficiency. In white light LED packaging process, encapsulation process that is dispensing fluorescent substance with silicon to blue light LED chip is most important. So, in this paper we develop EHD pump system using voice coil motor and electrostatic pump for dispensing fluorescent substance. For these things we conduct basic test about liquid surface profiles by voltage and process time. Through this data we decide optimal process condition and verify the optimal condition using design of experiment method. And to confirm uniformity of the condition, we conduct repeat dispensing test.

• Korean Journal of Poultry Science
• /
• v.32 no.3
• /
• pp.179-186
• /
• 2005

This study was conducted to establish a comprehensive guideline for grading system of poultry meat cuts. Slaughter and further processed houses were divided into large(>70,000 heads/day), middle($50,000\~25,000$ heads/day), and small scale(<25,000 heads/day), and the production managers were asked by the Questionnaire. Most poultry meat cuts produced by larger- and middle-slaughter house were consumed by dealers, franchisee and department store in increasing order, whereas further processed poultry meat cuts(small scale) provided meals for the students in the high amount. The packaging step was best f3r the determination of grading in the large slaughter house. This survey indicated that two or more grades were proper to determine the grading in the middle slaughter house, however only two grades were proper for the others. Freshness, bruise, wound, trimming and the inclusion of foreign materials affected to the grading. Poultry meat cuts were accepted for the grading in large-slaughter house, but whole poultry carcass was accepted for the grading in the others. Most managers agreed with that the grading system was only applied for the amounts requested. They also suggested that the grading system of poultry meat cuts were necessary in near future, even though it was not urgent to apply.