• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.105-110
• /
• 2014

It is required to improve the efficiency and the reliability of the polymer solar cells (PSCs) as the energy saving optical device for the future application of the smart farm facilities. In this study, we fabricated the bulk hetero junction PSCs with organic passivation film layer for the reliability improvement of the devices. The effects of the passivation layer on the electrical properties of the PSCs were studied. The materials of passivation layer are composed of poly vinyl alcohol (PVA) and ammonium dichromate, and the passivation films were fabricated by the spin coating method on the P3HT:$PC_{61}BM$/LiF/Al substrate. The prepared structure of the device is the glass/ITO/PEDOT:PSS/P3HT:$PC_{61}BM$/LiF/Al/passivation layer. The performances of the PSCs with the organic passivation film showed better electrical properties compared with the PSCs without passivation layers. The power conversion efficiency (PCE) values of passivated PSCs decreased from 3.0 to 1.3% after air exposure for 140 hrs. In contrast, the PCE values for the devices without passivation decreased sharply from 3.5 to 0.1% under the same exposure condition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3398-3405
• /
• 2010

In this paper we developed a CCM Manager which is a management system to support efficient development, publication and promotion of Clinical Contents Model(CCM)'s outcomes. We derived the functions of manager and user from the analysis of work process from development of CCM to management and publication, designed the database based on CCM architecture, and developed web-based system for each user to easily access and search the contents. CCM Manager supports to share the results between model developers well, distribute and promote the outcomes of model type to general users without manager's manual packaging and publishing it. This paper shows superiority compared with other clinical information model management system in aspects of providing multiple search functions, visual model browsing methods and management functions. The proposed CCM Manager is currently used in process of CCM development, and the analysis of its efficiency with the results will be made in the future.

• Journal of the Korean Society of Food Culture
• /
• v.13 no.3
• /
• pp.215-225
• /
• 1998

The purpose of this study was to identify the development trends and feasibility of health-oriented convenience foods in Korea for promoting health. Special objectives were to investigate characteristics of health-oriented convenience foods; to determine the factor affecting the sale of health-oriented convenience foods; to examine marketing strategies of the foodservice industry; and to provide feedback for the development plan. Questionnaires were developed in this study and mailed to 10 food companies in Korea and then telephone interviews were carried out. Also, marketing strategies of each industry are analyzed by the visit interview with food processing and marketing chargers. The survey was conducted between September 30 and October 30, 1997. The results of this study were summarized as following : The most popular health-oriented convenience foods were completely precooked type, pouch/PE bag packaging type, diet purpose, 100-300 gram size, and convenience store sales with regard to selling and developing health-oriented convenience foods. About factors affecting selling health-oriented convenience foods, the best contributors among factors were seasonality, convenience, and negative image for instant foods. For health-oriented convenience foods, the most important factor was the improvement of taste and quality. Adults should be the most promising customers for health-oriented convenience foods. Food companies must promote variety, taste, nutrition, convenience, price, and advertising of health-oriented convenience foods for the powerful marketing strategies in the future.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.12
• /
• pp.261-270
• /
• 2020

In this study, we identify promising technologies for Piggyback transportation system by analyzing the relevant patent information. In order for this, we first develop the patent database by extracting relevant technology keywords from the pioneering research papers for the Piggyback flactcar system. We then employed textmining to identify the frequently referred words from the patent database, and using these words, we applied the LDA (Latent Dirichlet Allocation) algorithm in order to identify "topics" that are corresponding to "key" technologies for the Piggyback system. Finally, we employ the ARIMA model to forecast the trends of these "key" technologies for technology forecasting, and identify the promising technologies for the Piggyback system. with keyword search method the patent analysis. The results show that data-driven integrated management system, operation planning system and special cargo (especially fluid and gas) handling/storage technologies are identified to be the "key" promising technolgies for the future of the Piggyback system, and data reception/analysis techniques must be developed in order to improve the system performance. The proposed procedure and analysis method provides useful insights to develop the R&D strategy and the technology roadmap for the Piggyback system.

• The Journal of Korean Medicine
• /
• v.27 no.3 s.67
• /
• pp.222-226
• /
• 2006

Objective: The aim of this study was to introduce newly developed cooperation group standards of acupuncture needles for single use and to make a contribution to the future development of Korean Industrial Standards (KS) of acupuncture needles for single use. Results and Conclusion: Quality assurance and quality control with high safety profile is one of the most critical issues in medical device manufacturing. Up to now, proper attention has not been paid to this issue with respect to acupuncture needles for single use and their related devices. We, therefore, organized a committee to make guidelines to produce an acupuncture needle with high quality and safety. In the committee, we reviewed the topic from an historical viewpoint, and investigated the current situation of the standardization of acupuncture needles in other developed countries. Finally, we developed the cooperation group standards in advance of development of KS on the acupuncture needles for single use. The standards are composed of 12 sections describing: Scope, Normative references, Definitions, Materials, Configuration, Appearance and Cleanliness, Quality, Sterilization and Safety, Processing of Surface and Coating Material, Test, Packaging, and Labeling. We hope that the standards would be useful guidelines to produce high quality acupuncture needles and play an important role in the development of KS in the future.

• Journal of Nutrition and Health
• /
• v.38 no.3
• /
• pp.251-258
• /
• 2005

The purposes of this study were to conceptualize the Home Meal Replacement (HMR) in Korea and to gather professionals' opinions of prospect and task for HMR industry in Korea. A total of 67 experts participated in a three round survey by Delphi technique, which was used to integrate and share the each expert's professional idea. According to the result, HMR was translated into 'Gajeongsiksa daeyongsik' in Korean and given definition to 'a meal taken directly or through brief cooking process at home by purchasing ready to eat or ready to end-cook type of food'. As the result of categorizing HMR products of Korean food, 'I. Ready to eat' such as side dishes, kimchi, salad, sandwich, kimbab, and so on and 'II. Ready to heat' such as rice, porridge, retort food (soup, broth, curry, spaghetti, etc.), frozen pizza, grilled food, jabchae, instant soup, and so on were construed in a limited sense of the HMR. In addition, 'III. Ready to end-cook' such as frozen dumpling, frozen pork cutlet, seasoned meat, powder-type soup, and so on as well as these two kinds were interpreted in a broad sense of the HMR. In the prospect of HMR industry in Korea, the Korean HMR industry would develop continuously accompanied by increasing of consumers using HMR products. Introduction and generalization of HMRs would serve the convenience for meal preparation and then influence the change of home meal pattern. Nevertheless, it was concerned about that using HMRs might have limitation on solving the problems of dietary life including irregular meal, skipping a meal, and so on and influence the nutrition imbalance. For the development of HMRs, developing various menu and the packaging materials for HMR products, constructing the thorough sanitary management, and strengthening R & D for the HMR of Korean food were the future tasks in Korean HMR industry.

• Design Convergence Study
• /
• v.18 no.1
• /
• pp.49-60
• /
• 2019

While one person household and nuclear family have been increasing, supermarkets began to launch home meal replacement(HMR) promotion. Each brand competes over various types of HMR such as box lunch. In particular, the sales of HMR have been increasing due to one-person households. Experts predicted HMR market will be increased in the future as well. This study presents design evaluation with regards to HMR package design for elders. The methods of this study are: First, research literature review on senior society and analyse the design for both domestic and foreign HMR products. Second, survey on product design for evaluation was conducted. Third, user's evaluation survey was conducted on elders. As a result, containers mostly came in cup or box shaped package designs. The package provided both still and illustration image of food. The HMR design for elders are recommended as follows: first, HMR should be service designed for users. Second, the design should be for elders as well. Third, the design should be empathetic and abundant. For user-interface, the packaging material shall not be slippery and the shape of grip should be considered thoroughly for the elder's design.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.124-130
• /
• 2023

Recently, fan out wafer level packaging, which enables high integration, miniaturization, and low cost, is being rapidly applied in the semiconductor industry. In particular, FOWLP is attracting attention in the mobile and Internet of Things fields, and is recognized as a core technology that will lead to technological advancements such as 5G, self-driving cars, and artificial intelligence in the future. However, as chip density and package size within the package increase, FOWLP warpage is emerging as a major problem. These problems have a direct impact on the reliability and electrical performance of semiconductor products, and in particular, cause defects such as vacuum leakage in the manufacturing process or lack of focus in the photolithography process, so technical demands for solving them are increasing. In this paper, warpage simulation according to the thickness of FOWLP material was performed using finite element analysis. The thickness range was based on the history of similar packages, and as a factor causing warpage, the curing temperature of the materials undergoing the curing process was applied and the difference in deformation due to the difference in thermal expansion coefficient between materials was used. At this time, the stacking order was reflected to reproduce warpage behavior similar to reality. After performing finite element analysis, the influence of each variable on causing warpage was defined, and based on this, it was confirmed that warpage was controlled as intended through design modifications.

• Journal of Fashion Business
• /
• v.19 no.4
• /
• pp.183-199
• /
• 2015

This study aimed to systematize the apparel vendor work processes and provide useful information to future employees of clothing export units by analyzing the processes of vendors' manufacturing tasks. A survey of 20 apparel vendors servicing mainly U.S. buyers was conducted on employees of overseas business departments working for more than five years. buyers. Based on the results, vendors mainly manufactured cut-and-sew knit products. Regarding the production method, OEM was used more frequently than ODM. Fourteen (70%) companies used the ODM method. This suggests that vendors are expanding their production method from OEM to ODM. In order to summarize the work of each business based on the clothing production process research results, buyers were in charge of planning products and the vendors were in charge of sampling. Production of materials and the approval of material tests were out sourced. Overseas factories of vendors were in charge of bulk (mass) production and garment finishing, as well as packaging and shipping the completed products. Even though the vendors' head offices do not directly produce clothes, they play a pivotal role in ensuring planning and management progress in clothing production. As buyers prefer direct contracts for cost reduction, the vendor additionally performs the role of an agent. Also, with the increase in ODM production ratio, the work area of the vendor is expanding. If Korean clothing exporters improve their global competitiveness by investing in the R&D of materials and design to enhance the ODM method, the development of Korea's clothing and export industry will benefit significantly.

• Analytical Science and Technology
• /
• v.32 no.6
• /
• pp.233-242
• /
• 2019

Substance identification is the first step of the REACH registration. It is essential in terms of Classification, Labelling and Packaging (CLP) regulation and because even trace amounts of impurities or additives can affect the classification. In this study, a scheme for the screening, quantification, and interpretation of trace amounts of hazardous inorganic substances is proposed to detect the presence of more than 0.1% hazardous inorganic substances that have been affecting the hazard classification. An exemplary list of hazardous inorganic substances was created from the substances of very high concern (SVHCs) in REACH. Among 201 SVHCs, there were 67 inorganic SVHCs containing at least one or ~2-3 heavy metals, such as As, Cd, Co, Cr, Pb, Sb, and Sn, in their molecular formula. The inorganic SVHCs are listed in excel format with a search function for these heavy metals so that the hazardous inorganic substances, including each heavy metal and the calculated ratio of its atomic weight to molecular weight of the hazardous inorganic substance containing it, can be searched. The case study was conducted to confirm the validity of the established scheme with zinc oxide (ZnO). In a substance that is made of ZnO, Pb was screened by XRF analysis and measured to be 0.04% (w/w) by ICP-OES analysis. After referring to the list, the presence of Pb was interpreted just as an impurity, but not as an impurity relevant for the classification. Future studies are needed to expand on this exemplary list of hazardous inorganic substances using proper regulatory data sources.