• 천문학회보
• /
• 제39권2호
• /
• pp.96.1-96.1
• /
• 2014

The rotation of asteroids can help reveal not only the fundamental characteristics of asteroids but also the origin and evolution of our Solar System. From the photometric observations for NEA 162173 (1999 JU3) and Maria family asteroids using 0.5 m- to 2 m- class telescopes at 10 observatories in the northern hemisphere, I obtained a total of 260 lightcurves for 97 asteroids and derived synodic rotational periods for 51 objects, including newly obtained periods of 34 asteroids. For the sake of efficiency, I developed an observation scheduler, SMART (Scheduler for Measuring Asteroid RoTation) and a photometric analysis software subsystem, ASAP (Asteroid Spin Analysis Package). Based on the lightcurve analysis of NEA 162173 (1999 JU3) and Maria family asteroids, 1) I present the rotational and observational characteristics of 1999 JU3 and provided the Hayabusa-2 Science team with the information on pole orientations, 2) I investigated correlations among rotational periods, amplitudes of lightcurves, and sizes, and conclude that the rotational properties of old-type family asteroids have been changed considerably by the YORP effect. 3) Finally, I found the Yarkovsky footprints on the Maria asteroid family and estimated that approximately 37 to 75 Maria family asteroids larger than 1 km have entered the near-Earth space every 100 Myr. This study should reveal the collisional history and transport route of the members from the resonance region to the near Earth space, for the first time.

• 한국소음진동공학회논문집
• /
• 제17권8호
• /
• pp.673-682
• /
• 2007

Recently the trend of automobile industry is that IQS evaluation index against a sensitivity quality is increasing. To reduce rattle noise due to speaker sound at low frequencies, it is required the advanced technology analysis process of body structure. This paper optimized the design parameters of package tray panel according to the theoretical background about robust design and suggested the design guideline for resonance avoidance and the reduction of vibrational sensitivity considering the excitation frequency of woofer speaker. And this paper described the design process of a door module panel through the sensitivity analysis in case of the door speaker excitation. Finally, the analysis of the quality deviation using mother car is suggested to guarantee the stable characteristics of vehicle vibration in the early stage of vehicle development. These improvements can lead to shortening the time needed to develop better vehicles.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1999년도 학술발표대회 논문집 제18권 1호
• /
• pp.218-223
• /
• 1999

A piezoelectric flextentional deep-water sonar transducer has been simulated using a coupled FE-BEM. The dynamics of the sonar transducer is modelled in three dimensions and is analyzed with extern리 electrical excitation conditions as well as external acoustic pressure loading conditions. Different results are available such as steady-state frequency response for RX and TX, displacement modes, directivity patterns, back-scattering patterns, resonant frequencies, bandwidths, quality factors, transmitting voltage (TV) responses, input receiving sensitivity (RS) responses. White the present barrel-stave typed sonar transducer of the piezoelectric material is being simulated, the external surface of the transducer is modified in order to allow the same water pressure to be applied to the inner and the outer surfaces of the transducer. With this modification for deep-water application, the resonance frequency of the modified flextentional sonar transducer becomes much lower than that of the unmodified flextentional sonar transducer. The results of the present sonar transducer modelling are also compared with those of a commercial package such as ATILA.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권4호
• /
• pp.295-301
• /
• 2011

A triple-band transceiver module for 2.3/2.5/3.5 GHz mobile WiMAX, IEEE 802.16e, applications is introduced. The suggested transceiver module consists of RFIC, reconfigurable/multi-resonance MIMO antenna, embedded PCB, mobile WiMAX base band, memory and channel selection front-end module. The RFIC is fabricated in $0.13{\mu}m$ RF CMOS process and has 3.5 dB noise figure(NF) of receiver and 1 dBm maximum power of transmitter with 68-pin QFN package, $8{\times}8\;mm^2$ area. The area reduction of transceiver module is achieved by using embedded PCB which decreases area by 9% of the area of transceiver module with normal PCB. The developed triple-band mobile WiMAX transceiver module is tested by performing radio conformance test(RCT) and measuring carrier to interference plus noise ratio (CINR) and received signal strength indication (RSSI) in each 2.3/2.5/3.5 GHz frequency.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.801-809
• /
• 2016

The electrically excited synchronous generator (EESG) is applied in wind turbine systems recently. In an EESG control system, electrical torque is affected by stator flux and rotor current. So the control system is more complicated than that of the permanent-magnet synchronous generator (PMSG). Thus, the higher demanding of the control system is required especially in case of wind turbine mechanical resonance. In this paper, the mechanism of rotor speed resonant phenomenon is introduced from the viewpoint of mechanics firstly, and the characteristics of an effective damping torque are illustrated through system eigenvalues analysis. Considering the variables are tightly coupled, the four-order small signal equation for torque is derived considering stator and rotor control systems with regulators, and the bode plot of the closed loop transfer function is analyzed. According to the four-order mathematical equation, the stator flux, stator current, and electrical torque responses are derived by torque reference step and ramp in MATLAB from a pure mathematical deduction, which is identical with the responses in PSCAD/EMTDC simulation results. At last, the simulation studies are carried out in PSCAD software package to verify the resonant damping control strategy used in the EESG wind turbine system.

• 한국전자파학회논문지
• /
• 제15권5호
• /
• pp.509-516
• /
• 2004

Cu 및 BCB 공정을 사용하여 고성능 RF 수동회로를 실리콘 기판 상에 구현하는 RF 수동 집적회로 공정을 개발하였다. 이러한 기술은 개별 수동소자를 통한 모듈 구현방식보다 훨씬 작고 저렴하며 우수한 성능의 RF모듈을 구현할 수 있게 하였다. 개발된 실리콘 수동 집적회로 공정으로 제작된 내경 225 um, 회전수 2.5의 인덕터는 2.7 nH의 인덕턴스를 가지며 1 ㎓ 이상에서 30 이상의 품질계수를 가지는 것으로 측정되었다. 또한 개발된 인덕터를 사용하여 WLCSP(Wafer Level Chip Scale Package) 형태의 수동회로를 제작하였다. 제작된 저역 여파기는 2차 고조파 억제를 위해 인덕터 내경 안에 병렬공진용 커패시터를 삽입하였고 2.45 ㎓에서 0.5 ㏈ 이하의 삽입손실을 보였다. 그리고 고역 여파기와 저역 여파기 구조를 가지는 발룬 회로는 2.45 ㎓에서 0.5 ㏈ 이하의 삽입손실과 182도의 출력 단자간 위상 차이를 보여주었다.

• 한국음향학회지
• /
• 제15권5호
• /
• pp.99-106
• /
• 1996

컴프레서의 소음은 냉장고로부터 발생하는 전체 소음레벨중 높은 기여를 나타낸다. 그리고, 컴프레서로부터 방사되는 소음의 상당부분이 컴프레서 쉘의 진동에 의해 방사되는 소음이다. 본 연구에서는 컴프레서 쉘의 동특성을 규명하기 위하여 범용 구조해석 패키지인 MSC/NASTRAN을 이용하여 컴프레서 쉘을 여러 분계로 분리하여 해석한 뒤, 부분구조 합성법을 이용하여 전계의 동특성을 규명하였다. 그리고 각 분계의 변형 에너지와 운동에너지를 산정하여 각 분계가 전계에 기여하는 정도를 파악하였다. 컴프레서 소음에 가장 높은 영향을 미치는 1차모드를 고주파로 이동시키기 위하여, 1차 모드에 기여가 높은 분계의 질량과 강성을 변경하여 컴프레서 쉘의 동특성 개선 방향을 제시하였다.

• Journal of Biosystems Engineering
• /
• 제27권5호
• /
• pp.391-398
• /
• 2002

During handling unitized products, they are subjected to a variety of environmental hazards. Shock and vibration hazards are generally considered the most damaging of the environmental hazards on a product and it may encounter while passing through the distribution environment. A major cause of shock damage to products is drops during manual handling. The increasing use of unitization of pallets has been resulted in a reduction of the shock hazards. This has caused an increasing interest in research focused on vibration caused dam age. Damage to the product by the vibration most often occurs when a product or a product component has a natural frequency that falls within the range of the forcing frequencies of the particular mode of transportation being used. Transportation vibration is also a major cause of fruit and vegetable quality loss due to mechanical damage. This study was conducted to determine the vibration characteristics of the corrugated fiberboard bones for packages of pears, and to investigate the degree of vibration injury of the pears in the boxes during the simulated transportation environment. The vibration tests were performed on an electrohydraulic vibration exciter. The input acceleration to exciter was fixed at 0.25 G for a single container resonance test and 0.5 G for the vertical stacked container over the frequency range from 3 to 100 Hz. Function generator (HP-33120A) was connected by wire to the vibration exciter for controlling the input acceleration at a continuous logarithmic sweep rate of 1.0 octave per min. The peak frequency and acceleration on the single box test were 22.02 Hz, 1.5425 G respectively, and these values on the vertical stacked boxes were observed from the bottom box 19.02, 18.14, 16.62 and 15.40 Hz and 2.2987, 3.7654. 5.6087, and 7.9582 G, respectively. The pear in the bottom box had a slightly higher damage level than the fruit packed in the other stacked boxes. It is desirable that the package and transportation system has to be so designed that 15∼20 Hz frequency will not occur during the transportation environment.

• 대한기계학회논문집A
• /
• 제37권12호
• /
• pp.1513-1519
• /
• 2013

유전 알고리즘은 자연의 진화 과정에 기초한 계산 모델로서 전역 최적화 결과를 제공할 수 있다. 변화율(gradient)을 기반으로 하는 방법들과는 달리, 민감도 해석이 요구되지 않으므로 민감도 해석이 어려운 전계(electric field)에서의 나노 단위 구조물의 형상 설계에 적합하다. 본 연구는 유전 알고리즘과 ON/OFF 방법을 기반으로 위상최적화를 수행하여 가시광선 영역에서 새로운 형태의 나노개구 설계를 목표로 하였다. 연구의 목적은 나노개구 아래10nm에 위치한 측정영역에서의 전계 투과효율(transmission rate)을 최대화하며, 동시에 다른 영역에서의 전계 분포를 최소화하는 것이다. 유한요소해석 및 최적화 과정은 상용 프로그램 COMSOl과 Matlab 프로그램의 연동에 의하여 수행되었다. 최적화 모델의 결과는 초기 모델과의 전계 강도 (electric field intensity) 및 근접장의 초점치수(spot size)를 비교하여 분석하였다.

• 보건행정학회지
• /
• 제2권2호
• /
• pp.194-220
• /
• 1992

In recent years there has been a rapid influx of high cost MRI equipment into Korea. This diffusion has raised concerns about the changes it will bring for the health care utilization. Therefore, the purpose of this study is to identify socio-economic characteristics of MRI uses in Korea. A structured questionnaire was designed for this purpose, and 1, 091 users were surveyed at the 35 MRI units of 33 hospitals during a week, sometimes March 1992. The study reveals that high cost technology such as MRI, CT scanner is so prevalent in Korea. This is particularly the case in metropolitan areas. Among others, Seoul has the highest percentage of MRI equipment, 51.05%, Pusan 12.10% and Kwangju 11.9%. Unfortunately, most high cost technology equipments are foreign products. Thus, hospitals with such a high cost technology have difficulties in maintenance of the equipment. The average performance of MRI equipment has declined from 10.2 cases per day in 1988 to 7.16 cases in March 1992. Due to the rapid increase, the performance of MRI equipment seems to be deterioration. Male usere are dominant in the case of MRI use. The utilization rate has positively increased with the rise of educational level of users. The same is true for the level of income; the MRI utilization rate by income level shows that it is negatively proportional to income, which indicates that the poor have difficulties in the use of high cost technology. Particularly, the cost of MRI is so high that ordinary patients are unable to pay for it. For example, 86.3% of respondents have answered that the cost is too high even though they are insured by health insurance. This is the first empirical study on the use status of MRI. The information obtained in this study is sufficient to maintain that the Korean health insurance programme is urgently in need of improving the insurance benefit schemes. The easiest way to do this is to include provision of high cost technology service into the benefit package.