• Annual Conference of KIPS
• /
• 2015.10a
• /
• pp.800-802
• /
• 2015

클라우드 시스템은 온라인상에서 사용자가 원하는 형태에 따라 Saas, Paas, Iaas 등의 다양한 방식으로 자원을 할당받아 사용할 수 있는 시스템을 말한다. 또한 모바일 하드웨어의 성능이 나날이 발전함에 따라 클라우드 시스템을 모바일 환경에서 이용하는 것이 가능해졌는데, 모바일 환경에서는 편리한 이동성이라는 장점을 지니고 있지만, 무선의 방식으로 통신하기 때문에 전력 소모량에 대하여 한계점이 있다. 이를 해결하기 위해서 본 논문에서는 모바일 디바이스 이용자들이 클라우드 서비스를 이용하고자 할 때, 전력 소모를 줄인 경량화된 사용자의 인증 프로토콜을 제안하였다.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.185-192
• /
• 1998

Four kinds of polyamicacids(PAAs) were prepared by the condensation reaction of four diamines with different linkages, 3,3'-diaminodiphenyl sulfone(3,3'-$DDSO_2$), 4,4'-diaminodiphenyl sulfone(4,4'-$DDSO_2$), 4,4'-methylene dianiline(4,4'-MDA) and 4,4'-oxydianiline(4,4'-ODA), and dianhydride, 3,3', 4,4'-benzophenone tetracarboxylic dianhydride (BTDA) using the solvent, dimethylacetamide(DMAc). These four PAAs were blended with poly[2,2-(m-phenylene)-5,5'-bibenzimidazole](PBI) from the solution blending. Then called as Blend-I, II, III, and IV, respectively. Cast films or precipitated powders of the PBI/PAA blends were cured at a higher temperature than expected Tg to transform into PBI/PIs blends. Miscibility, specific intermolecular interaction for miscibility and their relative strength as a function of polyimide chemical structure with different four diamines in the PBI/PI systems were investigated. Four blends used in this study were all miscible, and the specific intermolecular interactions existing in these blends was thought to be the hydrogen bonding between the N-H of PBI and the C=O of PIs. The hydrogen bonding in the blends were shown to be stronger in the Blend-III and Blend-IV than Blend-I and II. It is speculated that the differences of hydrogen bonding strength of PBI/PI blends are dependent upon chemical structures of PIs, that is, PIs consisting of $SO_2$ group have a weaker hydrogen bonding strength than those of O or $CH_2$ group because the former has a larger spacer than the latter.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.385-390
• /
• 2004

In this paper, we designed a 4-bit optical true time-delay(TTD) for phased array antennas(PAAs), which is composed of a wavelength-fixed optical source, 2 ${\times}$ 2 optical MEMS switches, and fiber-optic delay lines. A 4-bit TTD with a unit time delay difference of 6 ps for 10-GHz PAAs has been implemented. Measurement results on time delay show an error of -0.4 ps at maximum, corresponding to a radiation angle error of less than 1.63$^{\circ}$. Thus, the TTD implemented in this research performs in excellent agreement with theory. Each TTD line, composed of MEMS switches and fiber-optic delay lines, connected to the corresponding antenna element has insertion loss in between 1.36 ㏈ and 2.40 ㏈ depending upon the setup of the switches. On the other hand, the insertion loss difference between TTD lines was 0.32 ㏈ at maximum for a fixed radiation angle. The TTD structure proposed in this paper might be more reliable and economical than those previously proposed using tunable wavelength sources if proper power equalization either with gain control of RF amplifiers or variable attenuators is achieved.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_3
• /
• pp.863-872
• /
• 2022

Rare earth elements (REEs) have been used as one of power tracers for understanding geological and environmental changes due to their similar physico-chemical properties. In this study, we investigated the characteristics of rare earth elements in atmospheric particulates(PM_2.5) collected in Beijing and Gwangju during January 2018. The total concentrations of REEs in the Beijing samples were about 16X higher than those in Gwangju samples, and both samples are enriched in light REE than heavy REE, up to 8-10 times. The Post Archean Australian Shale (PAAS)-normalized pattern showed that both samples are enriched in Eu, Tb, and Er, and displayed positive Eu but negative Ce anomalies. The elemental correlations indicate that both samples originated from China desert and Loess plateau as well as cities surrounding Beijing. This study suggests that REEs in PM_2.5 can be used as a powerful proxy of revealing the difference between China and Korea, and provide basic information on the source and transport of PM_2.5.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.799-816
• /
• 2023

Mineralogical and geochemical studies of shales within the Lower Anambra Basin was conducted to unravel the depositional environment, provenance, maturity, paleo-weathering conditions, and tectonic settings. Mineralogical studies conducted using X-ray diffraction analysis revealed that the samples were composed of kaolinite, montmorillonite, chlorite, and illite. KaolinIite is the dominant mineral, constituting approximately 41.5% of the bulk composition, whereas the non-clay minerals are quartz, ilmenite, and sillimanite. Geochemical analysis showed a predominance of SiO₂, Al₂O₃, and Fe₂O₃ contents of the shale samples with mean values of 52.29%, 14.09%, and 6.15% for Imo Shale (IS); 52.31%, 16.70%, and 7.39% for Mamu Shale (MS); 43.21%, 21.33%, and 10.36% for Enugu Shale (ES); 53.35%, 15.64%, and 7.17% for Nkporo Shale (NS); and 51.24%, 17.25%, and 7.78% for Agwu Shale (AS). However, the shales were depleted in Na₂O, MgO, K₂O, MnO, TiO₂, CaO, and P₂O₅. The trace element ratios of Ni/Co and Cu/Zn of the shale suggest an oxic depositional environment. The average SiO₂ vs. Al₂O₃ ratio of the shales indicated textural maturity. Compared to the PAAS standard, the shales plot below the PAAS value of 0.85, suggesting a high degree of maturity and intensive chemical weathering, further confirmed on a CIA vs. PIA plot. On log (K₂O/Na₂O) against SiO₂ and tectonic setting discriminant function diagrams, the shales plot mostly in the field of passive continental margin tectonic setting. The discriminant function diagrams as well as Al₂O₃/TiO₂ ratio of the shales showed that they were derived from a mixed source (mafic and intermediate igneous rocks).

• Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.21-29
• /
• 2007

For this study, we polymerized polyacrylamide base flocculants (PAA) and tested their properties and settling efficiency as a treatment for potable water. The most common chemicals for potable water treatment in Korea are alum or PAC. However, due to various reasons (such as rainy season or algae), inorganic flocculants cannot be solely depended on to solve all the problems caused by the poor quality of inflow water. When PAA coupled with coagulants in a potable water purification process is used, the turbidity removal efficiency increases by a factor of three on a single chemical system using PAC (Raw water: 5.21 NTU; Treated PAA+PAC: 0.34 NTU; and, Treated PAC: 1.04 NTU). It is possible to offset the toxic effect of residual monomers in treated water using PAA, because the concentrations of residual acrylamide are less than 400 mg/L in the polymer itself and less than $0.04\;{\mu}g/L$ in the treated water base at a dosage of 0.1 mg/L. Therefore, PAAs may be a workable, and dependable, potable water treatment process for the high pollutant level of resource water.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.102-105
• /
• 2004

희토류원소를 이용하여 전주-완주지역에서의 지표수와 지하수의 연계성을 밝혀내기 위해 8개 지역을 선정한 후, 기반암시료와 더불어 2002년 4월, 2003년 6월, 2003년 8월 그리고 2003년 11월의 4차례에 걸쳐 현장분석과 더불어 지표수와 지하수시료를 채취하였다. PAAS(Post Archean Australian Shale)로 규격화한 희토류원소분포도에 의하면, 갈수기인 2002년 4월과 2003년 11월의 지표수와 지하수는 대체적으로 중희토류가 부화되었고, 아울러 강한 Eu의 정(＋)의 이상과 Ce의 부(-)의 이상이 관찰된다. 그러나 갈수기가 끝난 2003년 6월과 장마가 끝난 직후인 2003년 8월의 시료에서는 대부분의 지표수와 지하수 시료가 Eu의 강한 부(-)의 이상을 보여준다. 그리고 일부 시료에서는 Ce의 부(-)의 이상도 관찰되었다. 이와 같은 희토류원소 분포 및 Ce과 Eu의 변화는 산화-환원작용의 영향을 받은 산화수(즉 Ce$^{3+}$ 와 Ce$^{4+}$ , Eu$^{2+}$와 Eu$^{3+}$ )의 변화에 의한 것으로 해석할 수가 있다. 뿐만 아니라, 본 연구결과에 의하면, 전주-완주 지역에서의 지표수와 지하수는 매우 밀접한 연관성을 갖고 있으며, 그 순환속도 또한 비교적 빠른 편으로 나타났다. 그리고 본 연구결과, 희토류원소는 지표수와 지하수의 연계성을 밝혀내는 데 있으며 매우 유용한 지시자임을 확인하였다.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.E1
• /
• pp.17-24
• /
• 2001

For the purpose of collecting fog droplets as a function of size a new sampling method was developed in this study. Formation of 100$\pm$10㎛ thickness of polymeric water absorbent film (PWAF) on a nuclepore filter could be successfully realized. Also applicability of particle induced X-ray emission (PIXE) method to the chemical analysis of size-segregated fog droplets collected on PWAF was examined experimentally with synthetic fog droplets generated from a nebulizer. Absorption capacity of S-PAAS polymeric water absorbent shows marked decreases in the range less than 1 wt% and slight decrease between 1 and 3.5 wt% of every salt concentration. Dependency of absorption capacity on pH shows the maximum at pH 7. No apparent peak which can influence the quantitative analysis of elements dissolved and suspended in fog droplets was found at PIXE spectrum of PWAF blank. PWAF kept the original shape without rupture under the PIXE analytical conditions of beam intensity for 10 to 60 nA and irradiation time of 4∼5 min. It should be said that the proposed new technique in the work is helpful to get more detailed information of fog droplets, to clarify the fog formation processes, and to develop a model of acid deposition process.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.410-412
• /
• 2004

한반도남부에 분포하는 중생대의 화강암류는 경기육괴지역을 중심으로 분포하는 쥬라기의 대보화강암류와 옥천대 이남지역에 주로 분포하는 백악기의 불국사 화강암류로 크게 분류할 수가 있다. 우리나라의 4$0^{\circ}C$ 이상의 고온성 온천수는, 이암층으로 덮여있는 포항지역을 제외하고는 대부분이 상기의 화강암류 지역에 분포하는 특성을 지닌다. 이 논문에서는 우리나라의 고온성 온천수의 지구화학적특성, 특히 희토류원소의 분포특성을 화강암류의 분포지역과 비교하여 고찰해보고자 하였다. 화학분석에 이용된 온천수 시료는 2004년도 2월의 건기에 채취되었다. 이 연구결과에 의하면, 아산온천(구 온양온천), 덕산온천, 포천지구 및 속초지구와 같이 쥬라기 대보화강암류지역에 주로 분포하는 온천수는 PAAS(Post-Archean Australian Shale)로 규격화하였을 경우 경희토류(La-Sm)이 결핍되어 있고, 중희토류는 편평한 분포양상을 보여주었다. 그리고 Eu의 이상(anomaly)이 거의 존재하지 않으며, Ce의 경우 부(-)의 이상 (Ce netative anomaly)을 보여주기도 한다. 반면에 옥천대 이남에 분포하는 백암, 덕구, 부곡, 마금산, 동래, 해운대, 포항지구의 온천수들은 전반적으로 편평한 분포특성을 보여준다. 그리고 대체적으로 Eu 과 Ce의 강한 정(+)의 이상을 보여준다. 이와 같은 Eu과 Ce의 이상은 온천수와 대수층간의 반응에 따른 결과로서 사료된다.

• Journal of Information Processing Systems
• /
• v.6 no.4
• /
• pp.553-562
• /
• 2010

The core services in cloud computing environment are SaaS (Software as a Service), Paas (Platform as a Service) and IaaS (Infrastructure as a Service). Among these three core services server virtualization belongs to IaaS and is a service technology to reduce the server maintenance expenses. Normally, the primary purpose of sever virtualization is building and maintaining a new well functioning server rather than using several existing servers, and in improving the various system performances. Often times this presents an issue in that there might be a need to increase expenses in order to build a new server. This study intends to use grid service architecture for a form of server virtualization which utilizes the existing servers rather than introducing a new server. More specifically, the proposed system is to enhance system performance and to reduce the corresponding expenses, by adopting a scheduling algorithm among the distributed servers and the constituents for grid computing thereby supporting the server virtualization service. Furthermore, the proposed server virtualization system will minimize power management by adopting the sleep severs, the subsidized servers and the grid infrastructure. The power maintenance expenses for the sleep servers will be lowered by utilizing the ACPI (Advanced Configuration & Power Interface) standards with the purpose of overcoming the limits of server performance.