• 한국정보통신학회논문지
• /
• 제16권2호
• /
• pp.273-278
• /
• 2012

본 연구에서는 임베디드 시스템에서 많이 사용되는 대용량 플래쉬 메모리 모듈 중 멀티미디어카드 (MMC; Multi-Media Card)와 마이크로프로세서간 데이터를 송수신 할 수 있는 SPI (serial peripheral interface) 버스 인터페이스를 설계하였다. 제안하는 구조는 AMBA 버스구조의 APB 저전력 버스에 호환되도록 설계하였다. 임베디드 시스템에 OS를 탑재하게 되면 여러 가지 주변기기들을 제어하기는 쉬워지지만 하드웨어와 소프트웨어의 덩치가 커져 결국 시스템 성능에 부담스런 영향을 미치게 된다. 본 논문에서는 OS를 사용하지 않는 임베디드 시스템에 멀티미디어카드를 인터페이스하기 위하여 SPI 통신 개념을 도입하였고, FPGA로 구현하였다. 설계한 SPI 모듈은 Altera QuartusII 툴을 사용하여 자동 합성하여 P&R을 수행하였다. 결과물은 Altera CycloneII FPGA로 구현하였으며 타겟으로 정한 25MHz에서 충분히 동작 가능하다.

• 한국결정성장학회지
• /
• 제19권5호
• /
• pp.215-222
• /
• 2009

Many concepts of external magnetic field applications in crystal growth processes have been developed to control melt convection, impurity content and growing interface shape. Especially, travelling magnetic fields (TMF) are of certain advantages. However, strong shielding effects appear when the TMF coils are placed outside the growth vessel. To achieve a solution of industrial relevance within the framework of the $KRISTMAG^{(R)}$ project inner heater-magnet modules(HMM) for simultaneous generation of temperature and magnetic field have been developed. At the same time, as the temperature is controlled as usual, e.g. by DC, the characteristics of the magnetic field can be adjusted via frequency, phase shift of the alternating current (AC) and by changing the amplitude via the AC/DC ratio. Global modelling and dummy measurements were used to optimize and validate the HMM configuration and process parameters. GaAs and Ge single crystals with improved parameters were grown in HMM-equipped industrial liquid encapsulated Czochralski (LEC) puller and commercial vertical gradient freeze (VGF) furnace, respectively. The vapour pressure controlled Czochralski (VCz) variant without boric oxide encapsulation was used to study the movement of floating particles by the TMF-driven vortices.

• 전기학회논문지P
• /
• 제63권2호
• /
• pp.95-101
• /
• 2014

In this paper, UPS, with a built-in instantaneous sag drop compensation features, was developed to improve performance. The improved UPS, using instantaneous moving average method, compensates by quickly measuring the voltage and series inverter of half-bridge type, using line-interactive method that links with the voltage of the battery and power source, was developed. In addition, by developing a parallel inverter that uses a high-efficiency PWM switching method, overall UPS system was enhanced. To verify the performance of the proposed algorithm, single-phase 5[kVA] UPS systems were designed and the experimental system was constructed. The low-cost type of Cortex-M3 module CPU STM32F103R8T6 (32[bit]) is attached and the switching time of mode transfer was set within 4 [ms]. THD of the linear load operates in less than 3[%], and the stability of the output voltage operates in approximately ${\pm}2[%]$ range. The superior performance of the operations was confirmed with the system set as above.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.895-898
• /
• 2009

본 연구에서는 임베디드 시스템, 특히 블루투스 베이스밴드에서 사용이 가능한 범용 I/O를 설계하였다. 제안하는 구조는 AMBA 버스구조의 APB 저전력 버스에 호환되도록 설계하였다. 임베디드 시스템에서 사용 가능한 범용 I/O를 인터럽트 소스로 사용될 수 있어야 한다. 본 연구에서는 에지 민감 방식과 레벨 민감 방식 모두를 고려하여 인터럽트를 수용할 수 있도록 설계하였고, 동작 폴라리티를 선택할 수 있어 임베디드 시스템에 유연하게 적용될 수 있도록 고려하였다. 설계한 범용 I/O 모듈은 자동합성하여 P&R을 수행하였다. 결과물은 Altera FPGA로 구현하였으며 25MHz에서 정상 동작하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권6호
• /
• pp.939-950
• /
• 2015

Wave-induced Longshore Sediment Transport (LST) play an important role in the dynamics of the Dhanushkodi sandspit located southeast of Rameshwaram. The LST along the Dhanushkodi coast is studied based on data collected simultaneously in Gulf of Mannar (GoM) and Palk Bay (PB) using directional waverider buoys. The numerical model REF/DIF1 was used to calculate the nearshore waves and the LST rate was estimated using three different formulae. The model validation was done based on the measured nearshore waves using InterOcean S4DW. Numerical model LITPACK was also used for simulating non-cohesive sediment transport and the LITLINE module was used to study the shoreline evolution over 5 years. Low net annual LST along PB (${\sim}0.01{\times}10^6m^3$) compared to the GoM region ($0.3{\times}10^6m^3$) were due to the weak waves. Accretion in the region led to growth of the Dhanushkodi sandspit by 65 m during the period 2010-2015.

• Design & Manufacturing
• /
• 제14권3호
• /
• pp.8-16
• /
• 2020

In this study, the vibration signal of the mold was measured and analyzed to monitoring the process time and characteristics during injection molding. A 5 inch light guide plate mold was used to injection molding and the vibration signal was measured by MPU6050 acceleration sensor module attached the surface of fixed mold base. Conditions except for injection speed and packing pressure were set to the same value and the change of the vibration signal of the mold according to injection speed and packing pressure was analyzed. As a result, the vibration signal had a large change at three points: "Injection start", "V/P switchover", and "Packing end". The time difference between "injection start" and "V/P switchover" means the injection time in the injection molding process, and the time difference between "V/P switchover" and "Packing end" means the packing time. When the injection time and packing time obtained from the vibration signal of the mold are compared with the time recorded in the injection molding machine, the error of the injection time was 2.19±0.69% and the error of the packing time was 1.39±0.83%, which was the same level as the actual value. Additionally, the amplitude at the time of "injection start" increased as the injection speed increased. In "V/P switchover", the amplitude tended to be proportional to the pressure difference between the maximum injection pressure and the packing pressure and the amplitude at the "packing end" tended to the pressure difference between the packing pressure and the back pressure. Therefore, based on the result of this study, the injection time and packing time of each cycle can be monitored by measuring the vibration signal of the mold. Also, it was confirmed that the level and trend of process variables such as the injection speed, maximum injection pressure, and packing pressure can be evaluated as the change of the mold vibration during injection molding.

• The Korean Journal of Pain
• /
• 제5권2호
• /
• pp.229-233
• /
• 1992

Recently a non-electronic, disposable and portable infusor, Baxter $Infusor^{(R)}$, has developed for delivering not only a continuous drug infusion but also extradoses of medication on a demand basis. The present study examined the impact of two methods of pain management on recovery in 20 patients undergoing upper abdominal surgery for stomach cancer. One group, 10 patients, received IV meperidine in the recovery room and IM meperidine on the ward on a PRN basis(PRN group). In the other group, 10 patients, a loading dose of nalbuphine 0.1mg/kg was given when the patient first complained of pain in the recovery room and patient controlled analgesia with IV nalbuphine, 0.5mg/kg day for continuous infusion, was initiated and continued for 72 hours(PCA group). The devices for PCA group was Baxter Infusor with patient control module which had flow rate 0.5ml/hr and lockout time was 15 min. As results of this study, the patients of PCA group get less pain than PRN group on operation day, the first and second days after surgery. VAPS values are $6.47{\pm}1.64$ vs $4.44{\pm}1.38$, $5.02{\pm}1.22$ vs $2.62{\pm}0.93$ and $3.22{\pm}1.47$ vs $2.02{\pm}0.71$ respectively pertaining to PRN and PCA groups(p<0.05). In conclusion, PCA group with IV nalbuphine provided more effective postoperative analgesia than PRN group with conventional meperidine IM.

• 한국물환경학회지
• /
• 제28권3호
• /
• pp.347-358
• /
• 2012

The SWAT (Soil and Water Assessment Tool) should be calibrated and validated with observed data to secure accuracy of model prediction. Recently, the SWAT-CUP (Calibration and Uncertainty Program for SWAT) software, which can calibrate SWAT using various algorithms, were developed to help SWAT users calibrate model efficiently. In this study, three algorithms (GLUE: Generalized Likelihood Uncertainty Estimation, PARASOL: Parameter solution, SUFI-2: Sequential Uncertainty Fitting ver. 2) in the SWAT-CUP were applied for the Soyang-gang dam watershed to evaluate these algorithms. Simulated total streamflow and 0~75% percentile streamflow were compared with observed data, respectively. The NSE (Nash-Sutcliffe Efficiency) and $R^2$ (Coefficient of Determination) values were the same from three algorithms but the P-factor for confidence of calibration ranged from 0.27 to 0.81 . the PARASOL shows the lowest p-factor (0.27), SUFI-2 gives the greatest P-factor (0.81) among these three algorithms. Based on calibration results, the SUFI-2 was found to be suitable for calibration in Soyang-gang dam watershed. Although the NSE and $R^2$ values were satisfactory for total streamflow estimation, the SWAT simulated values for low flow regime were not satisfactory (negative NSE values) in this study. This is because of limitations in semi-distributed SWAT modeling structure, which cannot simulated effects of spatial locations of HRUs (Hydrologic Response Unit) within subwatersheds in SWAT. To solve this problem, a module capable of simulating groundwater/baseflow should be developed and added to the SWAT system. With this enhancement in SWAT/SWAT-CUP, the SWAT estimated streamflow values could be used in determining standard flow rate in TMDLs (Total Maximum Daily Load) application at a watershed.

• 한국응용곤충학회지
• /
• 제51권3호
• /
• pp.235-243
• /
• 2012

중요 시설해충인 아메리카잎굴파리(Liriomyza trifolii (Burgess))의 개체군 밀도변동모형을 방울토마토 온실내 대기온도와 잎 표면온도를 이용하여 모형 정확성을 비교하였다. 모형 개발에 이용된 생물적 변수들은 기존 발표된 자료들을 사용하였고 모형 작성은 DYMEX$^{(R)}$ 프로그램을 이용하였다. 온도에 따라 상이한 발육기간과 산란수는 생리적 연령으로 표준화시킨 발육완료 분포모형, 연령 특이적 산란수 및 생존율을 비선형회귀 모형에 적합시켜 밀도변동 모형을 개발하였다. 줄내림방식의 방울토마토에서 식물체를 3개의 위치(상단: 지상 1.6 m 이상, 중단: 지상 0.9 - 1.2 m 사이, 하단: 지상 0.3 - 0.5 m 사이)로 나누고 각 위치별로 온실 내 대기 온도와 잎 표면 온도를 기록하였다. 온실 내 잎 표면 최대온도는 대기중 최대온도보다 항상 낮게 유지되고 있었으며, 하단, 상단, 중단의 순으로 온도가 낮아지는 경향을 보였다. 개발된 모형검정을 위한 초기이입 시기와 밀도는 6월초 성충 5마리가 총 50개의 알을 잎에 산란한 것으로 설정하였다. 온실 내 대기 온도와 잎 표면 온도를 이용하여 아메리카잎굴파리 유충 발육모형과 성충의 산란모형을 DYMEX로 프로그래밍하고 모의실험을 하였다. 모의실험결과를 평가하기 위해 기상자료를 수집한 동일한 온실에서 아메리카잎굴파리 유충 밀도를 육안조사 하였으나, 알, 번데기, 성충의 경우 육안조사가 어려워 대상에서 제외하였다. 육안조사결과 밀도변동패턴이 방울토마토 잎 표면 온도를 이용한 모의실험결과 밀도변동패턴과 유사하였다. 육안조사결과와 육안조사시기의 DYMEX모의실험 결과값을 상관분석 한 결과, 육안조사결과와 잎 표면 온도를 이용한 모의실험 결과가 유의한 양의 상관관계를 보였다(r = 0.97, p < 0.01). 대기 온도를 이용한 모의실험 결과와는 유의하지 않은 상관관계를 보였다(r = 0.40, p = 0.18). 본 연구결과 방울토마토 온실에서 아메리카잎굴파리 개체군 밀도변동의 적절한 예측을 위해서는 잎 표면 온도를 고려해야 하는 것으로 나타났다.

• 한국전자파학회논문지
• /
• 제22권6호
• /
• pp.613-624
• /
• 2011

본 논문에서는 X-대역 능동 위상 배열 레이더 시스템용 MMIC 다기능 칩을 0.5 ${\mu}m$ p-HEMT 상용 공정을 이용하여 개발하였다. 설계된 다기능 칩에는 제어 신호 선로수를 최소화하기 위해 디지털 직병렬 변환기를 포함하고 있다. 다기능 칩은 6-비트 디지털 위상 천이 기능, 6-비트 디지털 감쇠 기능, 송/수신 모드 선택 기능, 신호 증폭 기능 등의 다양한 기능을 제공한다. 24 $mm^2$(6 mm${\times}$4 mm) 칩 크기의 비교적 소형으로 제작된 MMIC 다기능 칩은 8.5~10.5 GHz에서 24/15 dB의 송/수신 이득 특성과 21 dBm의 P1dB 특성을 보였다. 그리고 6-비트, 64 상태에 대해 위상 천이 특성과 감쇠 특성의 측정 결과, 동작 주파수에서 $7^{\circ}$의 RMS 위상 오차와 0.3 dB의 RMS 감쇠 오차를 보였다.