• Asian-Australasian Journal of Animal Sciences
• /
• 제17권9호
• /
• pp.1296-1302
• /
• 2004

This study was conducted to evaluate the possible application of 2 D-SDS-PAGE (2 DE)-based proteome analysis techniques to the assessment of extreme proteolysis in postmortem skeletal muscle. Eight Hanwoo longissimus muscles were incubated immediately after slaughter for 24 h at 5$^{\circ}C$, 15$^{\circ}C$ or 36$^{\circ}C$. Warner Bratzler (WB)-shear force and ultrastructural configuration were determined at 24 h, and rate of proteolysis to 24 h was determined by 1 D-SDS-PAGE (1 DE) and 2 DE. In addition, tentative protein identification was performed from peptide mass fingerprints of MALDI-ToF analysis of major protein groups on 2 DE profiles. The result showed that although ultrastructural configuration was similar between the 5$^{\circ}C$ and 36$^{\circ}C$ treatments, meat at 5$^{\circ}C$ had higher WBshear force (approximately 5 kg greater). A higher rate of protein degradation at 36$^{\circ}C$ was observed based on Troponin-T degradation, 1 DE, and 2 DE analysis. This indicates that proteolysis during the early postmortem period was a significant determinant of shear force at 24 h. Little difference in proteolysis between 5$^{\circ}C$ and 15$^{\circ}C$ treatments was found based on classic 1 DE profile assessment. Meanwhile, considerable differences in the 2 DE profiles between the two treatments were revealed, with substantially higher rate of proteolysis at 15$^{\circ}C$ compared to 5$^{\circ}C$. Nuclease treatment improved 2 DE profile resolution. 400 ${\mu}$g and 600 ${\mu}$g of sample loading appeared to be appropriate for 24 cm pH 3-10 and pH 5-7 IPG strips, respectively. Protein detection and quantification of the 5$^{\circ}C$, 15$^{\circ}C$ and 36$^{\circ}C$ 2 DE profiles revealed 78, 163 and 232 protein spots respectively that were differentially modified in terms of their electrophoretic properties between approximately pI 5.3-7.7 with the molecular weight range of approximately 71-12 kDa. The current results demonstrated that 2 DE was a superior tool to 1 DE for characterising proteolysis in postmortem skeletal muscle.

• 한국식품과학회지
• /
• 제24권1호
• /
• pp.42-48
• /
• 1992

0.1N HCl 이용하여 빠른 산성화를 시켰을 때에 우유의 응고속도와 그 정도는 온도와 pH에 따른 점도 변화와 혼탁도 변화로서 측정하였고, DGL을 이용하여 천천히 산성화 시켰을 때에 우유의 겔화 과정은 rheological scanner로서 측정하였다. 우유의 겔화 과정은 rheological scanner로서 측정하였다. 우유 casein의 응고는 pH 5.0에서의 돌연한 점도증가로서 나타났으며 산에 의한 응고형성의 기점 pH로 삼았다. 산에 의한 응고속도는 $20^{\circ}C$에서 $50^{\circ}C$로 온도가 높아질수록 빨라졌고 최대 응고속도는 pH5.0에서 일어났다. 염($CaCl_{2}$)의 첨가는 모든 온도범위에서 최대 응고속도를 감소시켰으며 응고가 시작되는 pH 및 최대 응고속도가 일어나는 pH를 변화시켰다. 천천히 산성화 동안에 생성되는 겔의 초기 형성 시간과 조직 형성속도는 Cl 이온에 의해 촉진되고 SCN 이온에 의해 억제되었다. 겔에서 생겨나는 syneresis 현상은 저온으로 갈수록, pH가 4.6에 접근할수록 심했으며, $90^{\circ}C$에서 5분 동안 열처리한 우유에서는 가열온도($60{\sim}90^{\circ}C$)에 상관없이 일정하게 나타났다.

• 대한화학회지
• /
• 제33권1호
• /
• pp.127-134
• /
• 1989

${\beta},\;{\beta}$-diethoxycarbonylstryene 유도체(H, p-OCH$_3$, 3,4,5-(OCH$_3)_3$), 3,4,5-methylenedioxy)에 대한 3-mercaptopropionic acid의 친핵성 첨가반응 속도상수를 자외선 분광법으로 측정하여 넓은 pH 범위에서 적용될수 있는 속도식을 구하였다. pH에 따르는 속도상수의 변화, 일반염기촉매작용등을 바탕으로 이 첨가반응 메카니즘을 제안하였다. 즉 pH 6.0 이하에서는 중성인 3-mercaptopropionic acid 분자의 첨가로 이 반응이 시작되며 pH 6.0∼8.0영역에서는 이 중성분자와 황화음이온의 첨가가 경쟁적으로 일어나며, pH 8.0이상에서는 황화음이온에 의해서만 첨가반응이 진행된다.

• 약학회지
• /
• 제46권3호
• /
• pp.168-173
• /
• 2002

The physicochemical properties of aloesin, which has been recently found to reduce renal toxicity induced by cis-platin, were studied including solubility, partition coefficient ( $P_{c}$ ), osmolality, and stability. The solubility of aloesin was about 500 mg/mι, and the $P_{c}$ value for n-octanol/water was 1.01 $\pm$ 0.03. The degradation of aloesin followed the pseudo-first-order kinetics and was dependent on temperature, pH and ionic strength. From the pH-rate profile, the optimal pH was found to be 2.0~3.0. Some metal ions increased the degradation rate in the rank order of M $n^{2+}$ ＞ F $e^{3+}$ ＞ C $u^{2+}$ ＞ F $e^{2+}$. On the other hand, other metal ions such as B $i^{3+}$, $Ba^{2+}$, Z $n^{2+}$, N $i^{2+}$, $Co^{2+}$ and $Mg^{2+}$ did not show the unfavorable effects. After autoclaving, aloesin contents remaining were 81.8~98.8% of initial concentrations depending on pH. The most stable pH was 3.98 in the autoclaving. Osmolality increased linearly as concentration increased.sed.creased.sed.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권4호
• /
• pp.304-308
• /
• 2005

The response of IPTG induction was investigated through the monitoring of the alkali consumption rate and buffer capacity during the cultivation of recombinant E. coli BL21 (DE3) harboring the plasmid pRSET-LacZ under the control of lac promoter. The rate of alkali consumption increased along with cell growth, but declined suddenly after approximately 0.2 h of IPTG induction. The buffer capacity also declined after 0.9 h of IPTG induction. The profile of buffer capacity seems to correlate with the level of acetate production. The IPTG response was monitored only when introduced into the mid-exponential phase of bacterial cell growth. The minimum concentration of IPTG for induction, which was found out to be 0.1 mM, can also be monitored on-line and in-situ. Therefore, the on-line monitoring of alkali consumption rate and buffer capacity can be an indicator of the metabolic shift initiated by IPTG supplement, as well as for the physiological state of cell growth.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1996년도 춘계학술대회
• /
• pp.276-276
• /
• 1996

합성한 BR-8702-2의 시험결과 원소분석에서는 이론치와 실험치가 잘 일치하였고, 구조확인을 위한 FT-IR 및 FT-NMR(H$^1$)등의 시험에서도 구조와 일치하는 결과치를 나타내었다. 합성물질의 정량법을 HPLC 및 구성원소인 P와 N을 이용한 정량법에서도 유의성있는 결과를 얻을 수 있었다. 또한 분말상태인 이 물질의 안정성은 고온 고습하에서도 양호하였으며, 각종 완충수용액에서 pH가 분해에 미치는 영향을 pH-rate profile로 나타낸 결과 pH7, 8, 9에서 안정하였고 pH8에서 k=1.3$\times$$10^{-4}$day으로 가장 안정하여 shelf life는 807일이었다. 광에 대해서도 k=5.8$\times$$10^{-4}$day로 매우 안정하였다.

• Archives of Pharmacal Research
• /
• 제18권5호
• /
• pp.314-319
• /
• 1995

Antacid granules were prepared by agglomeration and powder method in high speed agitation type granulator. The copmositions of the test antacids were sodium bicarbonate nad magnesium carbonate nad a coating material was powder of polyvinylacetal diethyl-aminocacetate (AEA) and an additive material was talc powder. The dissolution characteristics of base from the antacid granules were investigated to evaluate neutralization capacity of hydrochloric profile of base and neutralization behavior, the following results were obtained : The prepared granules showed a pH-dependent dissolution pattern of a base. The dissolution profile of a base was varied with addition of talc powder as well as coating amount of AEA. The relationship between the ratio of dissolution retarded time for 20% and 10% AEA. The relationship between the ratio of dissolution retarded time for 20% AEA coated granules $\theta_{20}/\theta_{10}$ and the diameter reduction of the granules was explained by the rate process of neutralization of hydrochloric acid.

• Bulletin of the Korean Chemical Society
• /
• 제31권6호
• /
• pp.1773-1775
• /
• 2010

• Journal of Pharmaceutical Investigation
• /
• 제33권1호
• /
• pp.37-43
• /
• 2003

The objective of this study is to prepare ketoprofen (KP) - poly(ethylene glycol) (PEG) conjugates and to investigate their degradation kinetics. KP-PEG conjugates were synthesized from KP and PEG methy1ester by esterification in the presence of DCC. The KP-PEG conjugates (KPEG) were characterized by IR and $^{1}H-NMR$ spectroscopy. The hydrolysis of KPEG with time was studied using HPLC by simultaneous quantification of KP and KPEG. The hydrolysis rate constant was high at low and high pHs, and showed minimum at pH 4 and 5. As the size of KPEG increases, hydrolysis rate increased. The slope of degradation rate profile suggests that catalytic reaction seems to occur by specific acid/base catalysis. These results suggest that KPEG could be used as a prodrug for KP, which releases KP slowly in the body.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권3호
• /
• pp.244-250
• /
• 2008

An inductively coupled plasma etching process to replace an existing slower rate reactive ion etching process for $60{\mu}m$ diameter via-holes using Cl2/BCl3 gases has been investigated. Process pressure and platen power were varied at a constant ICP coil power to reproduce the RIE etched $200{\mu}m$ deep via profile, at high etch rate. Desired etch profile was obtained at 40 m Torr pressure, 950 W coil power, 90W platen power with an etch rate ${\sim}4{\mu}m$/min and via etch yield >90% over a 3-inch wafer, using $24{\mu}m$ thick photoresist mask. The etch uniformity and reproducibility obtained for the process were better than 4%. The metallized via-hole dc resistance measured was ${\sim}0.5{\Omega}$ and via inductance value measured was $\sim$83 pH.