• Microbiology and Biotechnology Letters
• /
• v.15 no.6
• /
• pp.381-387
• /
• 1987

Distribution of superoxide dismutase (SOD) which catalyzes the dismutation of superoxide radicals to hydrogen peroxide and oxygen has been examined in various genera of bacteria. SOD was produced by various bacteria independent of genus and species with variation in superoxide dismutase activity of each bacteria. Bacillus circulans which produced relatively large amount of SOD was selected and used to investigate the optimum culture conditions and further studies. The compositions of optimum culture medium for the enzyme production were 1% glucose, 2% polypeptone, 0.l% NaCl, and 0.2mM of methyl viologen and initial pH was 6.0. The highest enzyme production was observed after 20 hours of cultivation at 3$0^{\circ}C$ on a reciprocal shaker. The enzyme activity was maintained stably for a relatively long period by the addition of 5% ethanol in pH 5.0, 0.01M acetate buffer.

• Resources Recycling
• /
• v.16 no.6
• /
• pp.39-45
• /
• 2007

Optimum condition for neutralization has been studied to remove the copper and zinc ions from spent sulfate solutions which resulted from the acid washing of the base of brass bulb. Chemical distribution of copper and zinc species and the variation of solubility of the two ions with solution pH were obtained by considering the complex formation reaction and mass balance. Removal percentage of zinc was more sensitive to solution pH than that of copper. This results from the fact that the solubility of zinc is higher than that of copper. The form of coagulant affected little the removal percentage of zinc, while addition of coagulant as the phase of solution resulted in higher removal percentage of copper than as the phase of solid.

• KSBB Journal
• /
• v.8 no.4
• /
• pp.382-389
• /
• 1993

In order to elucidate the effect of acetate ion on the growth of Escherichia coli, flask and fermentor cultures were performed using M9 and LB media. Acetic acid was secreted at a higher rate under the conditions of high glucose concentration as well as of richer medium, i. e., LB broth. The pH in flask culture could not be controlled as i fermentor and pH decreased with the formation of acetic acid. The inhibition effect of acetic acid was pronounced at a lower pH, and the effective inhibitory concentrations of acetic acid were 2.0g/l for LB flask culture, 4.0g/l for M9 flask culture, and 8.0g/l for M9 fermentor culture. Dialysis flask culture was designed to slowly provide E coli cells with glucose. Solid LB agar was layered under LB liquid medium with the variation of agar concentration and solid volume, The increase in the solid portion in the total volume(agar＋liquid) resulted in the increase of the final cell concentration. This can be ascribed to the fact that the larger solid phase behaves like a larger reservoir for glucose and controls the growth of E. coli with a controlled rate.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.858-862
• /
• 2008

The Simultaneous Saccharification and Fermentation(SSF) of ethanol production from potato starch studied with respect to growth pH, temperature, substrate concentration. The glucoamylase and Saccharomyceses cerevisiae have a capacity to carry out a single stage SSF process for ethanol production. The characteristics, termed as starch hydrolysis, accumulation of glucose, ethanol production and biomass formation, were affected with variation in pH, temperature and starch concentration. The maximum ethanol concentration of 12.9g/l was obtained using a starch concentration 30g/l, which represent an ethanol yield of 86%. The optimum conditions for the maximum ethanol yield were found to be a temperature of 38, pH of 4.0 and fermentation time of 18hr. Thus by using the control composite design, it is possible to determine the accurate values of the fermentation parameters where maximum production of ethanol occurs.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.1
• /
• pp.39-44
• /
• 2012

This study was carried out to determine the relationships between cellulose decomposition and soil environmental factors in larch (Larix leptolepis) and pine (red pine: Pinus densiflora; rigitaeda pine: P. rigida ${\times}$ P. taeda) species planted in the same year (1963). The variation of cellulose mass loss with soil temperature, soil pH, soil $CO_2$ efflux rates, and soil water content was measured monthly for 4 months (July, August, September and October 2006) from three coniferous plantations. Mean mass loss rates during the study period were generally more rapid in rigitaeda pine (6.5 $mg\;g^{-1}\;day^{-1}$) than in red pine (6.2 $mg\;g^{-1}\;day^{-1}$) or larch (6.1 $mg\;g^{-1}\;day^{-1}$) plantations, although the mass loss rates were not significantly different among three tree species (P > 0.05). Cellulose mass loss rates among three tree species were positively correlated with soil temperature (red pine: r = 0.77, P < 0.05; rigitaeda pine: r = 0.59, P < 0.05; larch: r = 0.48, P < 0.05) at the 20 cm soil depth, while the mass loss rates were negatively correlated with soil pH (red pine: r = -0.63, P < 0.05; rigitaeda pine: r = -0.47, P < 0.05; larch: r = -0.43, P < 0.05). There was a significant correlation between cellulose mass loss and soil $CO_2$ efflux rates except for regitaeda pine plantation, while no significant correlation (P > 0.05) between cellulose mass loss and soil water content in larch or rigitaeda pine. The results suggest that cellulose mass loss rates in soil layers depend on the different soil environmental factors caused by tree species.

• Journal of the Korean Ceramic Society
• /
• v.48 no.6
• /
• pp.621-624
• /
• 2011

In order to deposit a homogeneous and uniform ${\beta}$-SiC films by chemical vapor deposition, we constructed the phase-diagram of ${\beta}$-SiC over graphite and silicon via computational thermodynamic calculation considering pressure(P), temperature(T) and gas composition(C) as variables in $C_3H_8-SiCl_4-H_2$ system. During the calculation, the ratio of Cl/Si and C/Si is maintained to be 4 and 1, respectively, and H/Si ratio is varied from 2.67 to 15,000. The P-T-C diagram showed very steep phase boundary between SiC+C and SiC region perpendicular to H/Si axis and also showed SiC+Si region with very large H/Si value of ~6700. The diagram can be applied not only to the prediction of the deposited phase composition but to compositional variation due to the temperature distribution in the reactor. The P-T-C diagram could provide the better understanding of chemical vapor deposition of silicon carbide.

• Korean Journal of Materials Research
• /
• v.23 no.11
• /
• pp.661-665
• /
• 2013

We investigated the characteristics of electroless plated Cu films on screen printed Ag/Anodized Al substrate. Cu plating was attempted using neutral electroless plating processes to minimize damage of the anodized Al substrate; this method used sodium hypophosphite instead of formaldehyde as a reducing agent. The basic electroless solution consisted of $CuSO_4{\cdot}5H_2O$ as the main metal source, $NaH_2PO_2{\cdot}H_2O$ as the reducing agent, $C_6H_5Na_3O_7{\cdot}2H_2O$ and $NH_4Cl$ as the complex agents, and $NiSO_4{\cdot}6H_2O$ as the catalyser for the oxidation of the reducing agent, dissolved in deionized water. The pH of the Cu plating solutions was adjusted using $NH_4OH$. According to the variation of pH in the range of 6.5~8, the electroless plated Cu films were coated on screen printed Ag pattern/anodized Al/Al at $70^{\circ}C$. We investigated the surface morphology change of the Cu films using FE-SEM (Field Emission Scanning Electron Microscopy). The chemical composition of the Cu film was determined using XPS (X-ray Photoelectron Spectroscopy). The crystal structures of the Cu films were investigated using XRD (X-ray Diffraction). Using electroless plating at pH 7, the structures of the plated Cu-rich films were typical fcc-Cu; however, a slight Ni component was co-deposited. Finally, we found that the formation of Cu film plated selectively on PCB without any lithography is possible using a neutral electroless plating process.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.115.1-115
• /
• 2003

Post-harvest decay, caused by Penicillium spp. is a serious problem of fruits worldwide. Morphological characteristics and molecular markers were used to characterize 22 Penicillium isolates from apples, 18 isolates from pears, 60 from oranges and 18 from grapes and 23reference isolates representing related Penicillium spp. to assess their diversity and resolve their taxonomy. Based on morphological and physiological characteristics, the isolates were grouped as identical or very similar to P. digitatum, P. italicum, P. ulaiense or very similar to P. crustosum, P. expansum, P. solitum and unidentified Penicillium spp. Based on sequence comparisons of ITS region, variable site were presented within and among the species, but there variation were not correlated with the species. Cluster analyses of AP-PCR fragment patterns using UP and L45 primer and the -tubulin gene sequence, the Penicillium species were segregated into distinct groups. Particularly. the -tubulin partial sequence data provided support for species concepts based on morphological and physiological characteristics.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.131-131
• /
• 2008

Silicon carbide (SiC) has attracted significant attention for high frequency, high temperature and high power devices due to its superior properties such as the large band gap, high breakdown electric field, high saturation velocity and high thermal conductivity. We performed Al ion implantation processes on n-type 4H-SiC substrate using a SILVACO ATHENA numerical simulator. The ion implantation model used a Monte-Carlo method. We studied the effect of channeling by Al implantation simulation in both 0 off-axis and 8 off-axis n-type 4H-SiC substrate. We have investigated the Al distribution in 4H-SiC through the variation of the implantation energies and the corresponding ratio of the doses. The implantation energies controlled 40, 60, 80, 100 and 120 keV and the implantation doses varied from $2\times10^{14}$ to $1\times10^{15}cm^{-2}$. In the simulation results, the Al ion distribution was deeper as increasing implantation energy and the doping level increased as increasing implantation doses. After the post-implantation annealing, the electrical properties of Al-implanted p-n junction diode were investigated by SILV ACO ATLAS numerical simulator.

• The Korean Journal of Malacology
• /
• v.2 no.1
• /
• pp.30-34
• /
• 1986

Genetic variations of Semisulcospjra gottschei in Korea were investigated by means of starch gel-electrophoresis. The results are as follows; 1) Eight loci of ${\alpha}$-Gpd, Mdh-2, Pept-1, Pgm-2, Gp-1, Gp-2, Gp-3 and Gp-4 were monomorphic, and 8 loci of Mpi, Mdh-1, Pgi, Got, Pept-2, Pept-3, Pgm-1 and Sdh showed genetic variations. 2) Means of allele per locus ($\bar{A}$) and polymorphism (P) were revealed 0.64 and 0.44, respectively. The value of heterozygosity ($H_G$) showed a little more than heterozygosity $H_D$. ($H_D$=0.09, $H_G$=0.13) 3) Genetic variation appears to be due to loci of Got, Pept, Pgi, and Sdh, all of which of the $H_D$ values are high.