• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.166-169
• /
• 2003

In this study, we evaluated the characteristics by the addition of 3 different kinds of nonionic surfactant to improve the dispersion stability of slurries. Slurry stability is an issue in any industry in which settling of particles can result in poor performance. So we observed the variation of particle size and settling rate when the concentration and addition time of surfactant are changed. When the surfactant is added after milling process, the particle size and pH became low. It is supposed that the particle agglomeration was disturbed by adsorption of surfactant on alumina abrasive. The settling rate was relatively stable when nonionic surfactant is added about 0.1~1.0 wt%. When molecular weight(MW) is too small like Brij 35, it was appeared low effect on dispersion stability. Because it can't prevent coagulation and subsequent settling with too small MW. The proper quality of MW for slurry stability was presented about 500,000. Consequently, the addition of nonionic surfactant to alumina slurry has been shown to have very good effect on slurry stabilization. If we apply this results to copper CMP process, it is thought that we will be able to obtain better yield.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1542-1543
• /
• 2007

This paper presents the effect of driving waveform for piezoelectric bend mode inkjet printhead with optimized mechanical design. Experimental and theoretical studies on the applied driving waveform versus jetting characteristics were performed. The inkjet head has been designed to maximize the droplet velocity, minimize voltage response of the actuator and optimize the firing frequency to eject ink droplet. The head design was carried out by using mechanical simulation. The printhead has been fabricated with Si(100) and SOI wafers by MEMS process and silicon direct bonding method. To investigate how performance of the piezoelectric ceramic actuator influences on droplet diameter and droplet velocity, the method of stroboscopy was used. Using the water based ink of viscosity of 11.8 cps and surface tension of 0.025N/m, it is possible to eject stable droplets through 64 nozzles average velocity of 4.05 m/s with standard deviation of 0.06 m/s and average diameter of $29.2\;{\mu}m$ with standard variation of $0.5\;{\mu}m$.

• Mycobiology
• /
• 제48권5호
• /
• pp.351-363
• /
• 2020

Here, we investigated fungal microbiota in the understory root layer of representative well-conserved geographically segregated natural wetlands in the Korean Peninsula. We obtained 574,143 quality fungal sequences in total from soil samples in three wetlands, which were classified into 563 operational taxonomic units (OTU), 5 phyla, 84 genera. Soil texture, total nitrogen, organic carbon, pH, and electrical conductivity of soil were variable between geographical sites. We found significant differences in fungal phyla distribution and ratio, as well as genera variation and richness between the wetlands. Diversity was greater in the Jangdo islands wetland than in the other sites (Chao richness/Shannon/Simpson's for wetland of the Jangdo islands: 283/6.45/0.97 > wetland of the Mt. Gariwang primeval forest: 169/1.17/0.22 > wetland of the Hanbando geology: 145/4.85/0.91), and this variance corresponded to the confirmed number of fungal genera or OTUs (wetlands of Jangdo islands: 42/283> of Mt. Gariwang primeval forest: 32/169> of the Hanbando geology: 25/145). To assess the uniqueness of the understory root layer fungus taxa, we analyzed fungal genera distribution. We found that the percentage of fungal genera common to two or three wetland sites was relatively low at 32.3%, while fungal genera unique to each wetland site was 67.7% of the total number of identified fungal species. The Jangdo island wetland had higher fungal diversity than did the other sites and showed the highest level of uniqueness among fungal genera (Is. Jangdo wetland: 34.5% > wetland of Mt. Gariwang primeval forest: 28.6% > wetland of the Hanbando geology: 16.7%).

• Preventive Nutrition and Food Science
• /
• 제9권3호
• /
• pp.276-282
• /
• 2004

Marginal Zn deficiency is prevalent through the world and yet human zinc status has not been properly assessed due to the lack of a reliable diagnostic indicator. One potential possibility for zinc status assessment using Zn-binding protein, metallothionein (MT)-mRNA, has been proposed. The purpose of the present study was aimed to show whether measurement of mononuclear cell (MNC) MT mRNA, using a competitive-reverse transcriptase-polymerase chain reaction (competitive-RT-PCR) assay, could indicate zinc status in human subjects. In this study, MNC MT-mRNA expression was measured using a competitive-RT-PCR to compare before and after 14 days of zinc supplementation (50 mg Zn/das zinc gluconate). RT-PCR oligonucleotide primers which were designed to amplify both a 278 bp segment of the human MT-2A cDNA and a 198 bp mutant competitor cDNA template from MNCs, were prepared. MT-2A mRNA was normalized by reference to the housekeeping gene, $\beta$-actin, mRNA for which was also measured by competitive-RT-PCR. There was considerable inter-individual variation in MT-mRNA concentration and yet, the mean MT-2A mRNA level increased 4.7-fold after Zn supplementation, as compared to before Zn supplementation. This MT-2A mRNA level was shown as the same pattern and, even more sensitive assay, compared to the conventional plasma and red blood cells (RBCs) Zn assessment in which plasma and RBCs zinc levels increased 2.3- and 1.2-fold, respectively (p<0.05). We suggest that MT competitive-RT-PCR can be a useful assessment tool for evaluating human zinc status.

• 한국지진공학회논문집
• /
• 제25권3호
• /
• pp.145-152
• /
• 2021

KAERI has planned to carry out a series of dynamic tests using a shaking table and time-history analyses for a channel-type concrete shear wall to investigate its seismic performance because of the recently frequent occurrence of earthquakes in the south-eastern parts of Korea. The overall size of a test specimen is b×l×h =2500 mm×3500 mm×4500 mm, and it consists of three stories having slabs and walls with thicknesses of 140 mm and 150 mm, respectively. The system identification, FE model updating, and time-history analysis results for a test shear wall are presented herein. By applying the advanced system identification, so-called pLSCF, the improved modal parameters are extracted in the lower modes. Using three FE in-house packages, such as FEMtools, Ruaumoko, and VecTor4, the eigenanalyses are made for an initial FE model, resulting in consistency in eigenvalues. However, they exhibit relatively stiffer behavior, as much as 30 to 50% compared with those extracted from the test in the 1st and 2nd modes. The FE model updating is carried out to consider the 6-dofs spring stiffnesses at the wall base as major parameters by adopting a Bayesian type automatic updating algorithm to minimize the residuals in modal parameters. The updating results indicate that the highest sensitivity is apparent in the vertical translational springs at few locations ranging from 300 to 500% in variation. However, their changes seem to have no physical meaning because of the numerical values. Finally, using the updated FE model, the time-history responses are predicted by Ruaumoko at each floor where accelerometers are located. The accelerograms between test and analysis show an acceptable match in terms of maximum and minimum values. However, the magnitudes and patterns of floor response spectra seem somewhat different because of the slightly different input accelerograms and damping ratios involved.

• 한국육종학회지
• /
• 제41권2호
• /
• pp.92-100
• /
• 2009

To investigate the mutagenecity of sodium azide (SA) and to select mutants having various agronomic characteristics in rice (Oryza sativa L. ssp. japonica), dry seeds of rice variety 'Suweon 472' were treated with 0, 0.5, 1.0, 2.0, and 4.0 mM SA solutions prepared in 0.1 M phosphate buffer (pH 3.0). Germination rate, seedling height and sterility were investigated in $M_1$ generation and chlorophyll mutations were observed in $M_3$ generation. Germination rate and seedling height decreased as the increase of SA concentration in $M_1$ generation, the maximum seed sterility (40.8%) was found at 4.0 mM SA concentration. Chlorophyll mutants were occurred in $M_3$ generation and the frequency calculated on a line basis was 13.5% at the same treatment. Many kinds of mutations for morphological and agronomic characters were observed and mutations with short culm and glabrous leaf were frequently found in $M_3$ generation. Interestingly, five mutant lines resistant to blast or bacterial blight (BB) were selected and evaluated with several isolates in $M_3$ generation although Suweon 472 has been known to be susceptible to blast and BB. These mutants showed all resistance to seven isolates of blast and a total of 76 lines among 2,567 lines evaluated showed resistant to race K1 of bacterial blight. Two mutant lines (440172 and 41272) showed different reaction to BB isolates from the other resistant mutants. A few kinds of endosperm mutants were also identified and most of them were waxy mutants.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권7호
• /
• pp.939-948
• /
• 2019

Objective: Extension and Agouti loci play a key role for proportions of eumelanin and pheomelanin in determining coat color in several species, including goat. Mongolian goats exhibit diverse types of coat color phenotypes. In this study, investigation of the melanocortin 1 receptor (MC1R) coding region in different coat colors in Mongolian goats was performed to ascertain the presence of the extension allele. Methods: A total of 105 goat samples representing three goat breeds were collected for this study from middle Mongolia. A 938 base pair (bp) long coding region of the MC1R gene was sequenced for three different breeds with different coat colors (Gobi Gurwan Saikhan: complete black, Zalaa Jinstiin Tsagaan: complete white, Mongolian native goat: admixture of different of coat colors). The genotypes of these goats were obtained from analyzing and comparing the sequencing results. Results: A total of seven haplotypes defined by five substitution were identified. The five single nucleotide polymorphisms included two synonymous mutations (c.183C>T and c.489G>A) and three missense (non-synonymous) mutations (c.676A>G, c.748T>G, and c.770T>A). Comparison of genotypes frequencies of two common missense mutions using chi-sqaure ($x^2$) test revealed significant differences between coat color groups (p<0.001). A logistic regression analysis additionally suggested highly significant association between genotypes and variation of black versus white uniform combination. Alternatively, most investigated goats (60.4%) belonged to H2 (TGAGT) haplotype. Conclusion: According to the findings obtained in this study on the investigated coat colors, mutations in MC1R gene may have the crucial role for determining eumelanin and pheomelanin phenotypes. Due to the complication of coat color phenotype, more detailed investigation needed.

• 한국식생활문화학회지
• /
• 제36권1호
• /
• pp.84-91
• /
• 2021

The oriental plum (Prunus salicina) is one of the most popular fruits in Korea due to its sweet taste and pleasant aroma. The objective of this study was to analyze the quality characteristics and antioxidant activities of a puree made using plums stored at low-temperatures. The quality characteristics were determined by estimating total soluble solids (TSS, °Brix), titratable acidity (TA, % citric acid), TSS/TA ratio, pH, colors, sugar content, and sensory profiles. The antioxidant effects were estimated by total polyphenol and flavonoid content and radical scavenging activity. The results showed that the plum puree containing both the flesh and the peel had markedly higher red coloration (a⁎ value) than the puree without the peel, while yellow coloration (b⁎ value) and lightness (L⁎ value) were lower in the puree without the peel than with the peel. The sensory qualities including the plum taste and flavor, texture as well as overall acceptance showed no significant variation between the samples. Meanwhile, the total polyphenol/flavonoid content and radical scavenging activities were significantly improved by the presence of fruit peel and by frozen storage. These findings suggest that frozen plums could be a suitable ingredient for making a puree and concentrate for the food manufacturing industry.

• Advances in environmental research
• /
• 제10권1호
• /
• pp.87-103
• /
• 2021

Anaerobic digestion (AD) refers to the biological process which can convert organic substrates to biogas in the absence of oxygen. The aim of this study was to determine the capability of feedstock to produce biogas and to quantify the biogas yield from different feedstocks. A co-digestion approach was carried out in a continuous stirred tank reactor operated under mesophilic conditions and at a constant organic loading rate of 0.0756 g COD/ L.day, with a hydraulic retention time of 25 days. For comparison, mono-digestion was also included in the experimental work. 2 L working volumes were used throughout the experimental work. The seed culture was obtained from composting as substrate digestion. When the feedstock was added to seeding, the biogas started to emit after three days of retention time. The highest volume of biogas was observed when the seeding volume used for 1000mL. However, the lowest volume of biogas yield was obtained from both co-digestion reactors, with a value of 340 mL. For methane yield, the highest methane production rate was 0.16 L CH4/mg. The COD with yield was at 8.6% and the lowest was at 0.5%. The highest quantity of methane was obtained from a reactor of Euphorbiaceae peel with added seeding, while the lowest methane yield came from a reactor of Euphorbiaceae stems with added seeding. In this study, sodium bicarbonate (NaHCO3) was used as a buffering solution to correct the pH in the reactor if the reactor condition was found to be in a souring or acidic condition.

• 한국식품위생안전성학회지
• /
• 제32권4호
• /
• pp.329-335
• /
• 2017

식품용 금속 캔의 내면 코팅에 사용되는 에폭시 수지로 부터 용출되어 식품으로 이행될 수 있는 BPA, phenol, p-tert-butylphenol과 BADGE, BFDGE 및 그 가수분해산물과 염화물 등 총 9종의 비스페놀 관련물질들을 HPLC/FLD를 사용하여 동시 분석하는 방법을 확립하여 검량선 및 회수율을 검토하고 식품유사용매로의 이행량을 조사하였다. 23종류의 식품용 금속 캔 총 161건을 대상으로 $60^{\circ}C$에서 30분간 용출한 결과 물, 4% 초산, 50% 에탄올 및 n-heptane에서 전부 불검출이었다. $95^{\circ}C$에서 30분간 용출한 결과는 식품유사용매로 4% 초산과 50% 에탄올을 사용한 경우 BPA는 불검출~$10.77{\mu}g/L$, phenol은 불검출~$2.35{\mu}g/L$ 검출되어 정량한계 수준이었으며, 국내 용출규격인 $600{\mu}g/L$에 비해 매우 낮은 수준임을 확인하였다. 또한 금속 캔은 저장성이 우수하여 식품을 장기간 보관하는 특징이 있어 보관기간(0~90일) 및 온도조건(4, 25, $60^{\circ}C$)에 따른 BPA 등 9개의 BPA 관련물질들의 이행량의 변화를 측정하였다. 온도조건이 $4^{\circ}C$ 및 $25^{\circ}C$인 경우 90일 동안 모든 식품유사용매에서 BPA를 비롯하여 9종의 BPA 관련물질들은 검출되지 않았다. 식품유사용매로 물과 4% 초산을 사용하여 $60^{\circ}C$의 온도에서 90일간 저장한 경우 BPA와 $BADGE{\cdot}2H_2O$는 시간이 지남에 따라 약하게 증가하는 경향을 보였으나, 이행량이 70일 이후부터 급격한 증가 없이 대체로 유지되는 수준이었고, 검출값 또한 정량한계 수준으로 매우 낮게 나타났다. 따라서 식품용 금속 캔으로부터 BPA를 비롯한 관련 물질들의 이행량은 안전한 수준으로 관리되고 있음을 알 수 있었다.