• Journal of Korean Society of Environmental Engineers
• /
• 제32권3호
• /
• pp.271-277
• /
• 2010

The purpose of this study is to investigate the seasonal variation of picoplankton community in Lake Juam depending on the change of physico-chemical factors such as rainfall, water depth, DO and pH. The concentration of chlorophyll-a was most high as 18.03 mg/$m^3$ in July when the rainfall and water temperature were highest. The concentration was gradually decreased in October, April and that of January was decreased most low as 1.86 mg/$m^3$. The highest concentration of the Chl-a was shown at 2 and 5 m of water depth than surface, and the concentration was gradually decreased when the water depth becomes deep. Overall, microplankton was the highest rate as 33.9~54.2%, nanoplankton was 24.3~30.5% and picoplankton was 21.6~41.2%. Picoplankton was included as considerable concentration in the water of Juam lake. Therefore it is necessary to remove thoroughly the picoplankton in the water treatment processes such coagulation·sedimentation and sand filtration. The protoplasm released from destruction of picoplankton by chlorine has high possibility to cause regrowth of bacteria and pathogenic microorganism in the distribution system by playing the role of the assimilable organic carbon.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.362-362
• /
• 2014

Atomic layer deposition (ALD) can be regarded as a special variation of the chemical vapor deposition method for reducing film thickness. ALD is based on sequential self-limiting reactions from the gas phase to produce thin films and over-layers in the nanometer scale with perfect conformality and process controllability. These characteristics make ALD an important film deposition technique for nanoelectronics. Tantalum pentoxide ($Ta_2O_5$) has a number of applications in optics and electronics due to its superior properties, such as thermal and chemical stability, high refractive index (>2.0), low absorption in near-UV to IR regions, and high-k. In particular, the dielectric constant of amorphous $Ta_2O_5$ is typically close to 25. Accordingly, $Ta_2O_5$ has been extensively studied in various electronics such as metal oxide semiconductor field-effect transistors (FET), organic FET, dynamic random access memories (RAM), resistance RAM, etc. In this experiment, the variations of chemical and interfacial state during the growth of $Ta_2O_5$ films on the Si substrate by ALD was investigated using in-situ synchrotron radiation photoemission spectroscopy. A newly synthesized liquid precursor $Ta(N^tBu)(dmamp)_2$ Me was used as the metal precursor, with Ar as a purging gas and $H_2O$ as the oxidant source. The core-level spectra of Si 2p, Ta 4f, and O 1s revealed that Ta suboxide and Si dioxide were formed at the initial stages of $Ta_2O_5$ growth. However, the Ta suboxide states almost disappeared as the ALD cycles progressed. Consequently, the $Ta^{5+}$ state, which corresponds with the stoichiometric $Ta_2O_5$, only appeared after 4.0 cycles. Additionally, tantalum silicide was not detected at the interfacial states between $Ta_2O_5$ and Si. The measured valence band offset value between $Ta_2O_5$ and the Si substrate was 3.08 eV after 2.5 cycles.

• Korean Journal of Materials Research
• /
• 제25권2호
• /
• pp.61-67
• /
• 2015

$Fe_2O_3$ coated plate mica($Fe_2O_3$/mica) for infrared reflectance red pigment was prepared under hydrothermal treatment. $Fe_2O_3$ was perfectly coated on mica via the difference of surface charge between $Fe_2O_3$ and mica particles at pH 3. $Fe_2O_3$/mica was then calcined at $800^{\circ}C$ to stabilize the coated layer on mica. The infrared(IR) reflectance pigments were characterized by X-ray diffraction, FE-SEM, zeta potential, and a UV-Vis-NIR spectrophotometer. In particular, the CIE color coordinate and IR reflectance properties of $Fe_2O_3$/mica pigments were investigated in relation to the thickness variation of the $Fe_2O_3$ layer coated on mica of various lateral sizes. The isolation-heat red paints containing the pigments were prepared and optimized with a thinner, settling agent, and dispersant. Then, the films were made. The thermal property of isolation-heat on these films was observed through the relationship of the IR reflectance value, which was based on the variation of the $Fe_2O_3$ layer's thickness coated on mica and mica's lateral size as IR reflectance pigment. With an increase in IR reflectance on these films, the thermal property of isolation-heat was effectively enhanced.

• Korean Journal of Plant Taxonomy
• /
• 제41권4호
• /
• pp.329-337
• /
• 2011

The Acer wilsonii complex including A. wilsonii, A. tutcheri, and A. confertifoilum is distributed in southern China. Morphological variation was examined to delimit the species and to determine whether recognition at the specific level was warranted. Univariate and bivariate statistical methods, based on data taken from herbarium specimens, were used to examine morphological variation between and within species. This study showed that A. tutcheri differed from A. wilsonii by its rather short inflorescence, small leaf blades, and three leaf lobes with distinctive serrate leaf lobes. In contrast, there was virtually no separation of taxa with respect to the paniculate-corymbose or short paniculate inflorescence between A. confertifolium and A. tutcheri, suggesting that A. confertifolium morphologically resembled A. tutcheri and is a rather smaller form of it. Circumscription of Acer wilsonii has been quite troublesome, because the important holotype and isotype specimens contained different species under the same number and were misleading with respect to the correct application of the name. Furthermore, lobation is very weak within ser. Sinensia, but diversified inflorescences usually occur in China. A three lobed leaves species, A. wilsonii, represents the reduction in lobation without any modification of panicle inflorescences and seems to be closely related to A. sinense. However, A. tutcheri, which shows a reduction in panicle inflorescence with four petals and sepals, may not be closely related to A. sinense. Three lobed taxa may not correctly reflect the true relationship within ser. Sinensia. The designated lectotype of A. wilsonii, line drawings of representative leaves of related species, a key, and distribution maps of these taxa are presented.

• CELLMED
• /
• 제11권1호
• /
• pp.4.1-4.8
• /
• 2021

Background: The Unani system of medicine has been practised since centuries for the treatment of a range of diseases. In spite of their efficacy they have been widely criticised due to the lack of standardization and poor quality control. Standardization of Unani medicine is a valuable issue at the present because they are very prone to contamination, deterioration, adulteration and variation in composition due to biodiversity as well as careless collection. Objective: To Standardize and Development of HPTLC Fingerprinting of a polyherbal Unani formulation Qurs-e-Safa. Materials and methods: The conventional and modern analytical techniques were used to standardise Qurs-e-Safa. The study was carried into three different batches of Qurs-e-Safa prepared with its ingredients. The parameters studied are organoleptic, microscopic, physicochemical parameters, phytochemical screening, TLC, HPTLC profile, aflatoxin, microbial load and heavy metal analysis. Results and conclusion: Qurṣ-e-Sa'fa is dark yellow in colour and aromatic smell. Uniformity of diameter and weight variation were found to be 13 ± 0, and 524.7 ± 1.72 mg. friability, hardness and disintegration time of all 3 batches were found to be (0.0615 ± 0.004, 0.0885 ± 0.0047 and 0.0725 ± 0.0058), (3.5 ± 0.2886, 3.67 ± 0.1674 and 3.67 ± 0.1674) and (16 to 17 minutes). Extractive value were found to be maximum in distilled water (38.488 ± 0.20, 37.3824 ± 0.38 and 39.8177 ± 0.13) followed by alcohol (27.5406 ± 0.54, 27.5656 ± 0.32 and 26.9229 ± 0.25). Loss of weight on drying, pH, total ash, acid insoluble ash, qualitative test was set in. Phytochemical screening revealed the presence of Carbohydrates, Phenols, Resins, Proteins, Steroids, fixed oil and Flavonoids. The microbial load was found absent and heavy metals were within permissible limits. The data evolved from the study may serve as a reference to validate and also help in the quality control of other finished products in future research.

• Korean Journal of Ichthyology
• /
• 제18권2호
• /
• pp.119-128
• /
• 2006

Fish assemblages associated with eelgrass beds and unvegetated area were compared based on specimens collected every month in Jindong Bay. The common fish species were Hexagrammos otakii, Acanthopagrus schlegeli, Lateolabrax japonicus, Pholis nebulosa, P. fangi, Leiognathus nuchalis, Repomucenus valenciennei, and Acanthogobius flavimanus. H. otakii, A. schlegeli, P. nebulosa and L. japonicus were higher abundance in an eelgrass bed than unvegetated area, whereas P. fangi, R. valenciennei and A. flavimanus were higher in unvegetated area. Sillago japonicus, Hippocampus japonica, Takifugu niphobles, Pseudoblennius percoides, Sebastes inermis, Syngnathus schlegeli, Sebastes schlegeli were found in an eelgrass bed, but not in unvegetated area. Most of fish species were primarily small fish species or juveniles of fish species in an eelgrass bed, while larger fish species were found in unvegetated area. The eelgrass bed in Jindong Bay seem to play a nursery role for fishes. Seasonal variations in both species composition and abundance were large in two habitats; higher number of species and individuals occurred May 2002, and April 2002 to July 2002, while biomass was the highest in April 2002 and July 2002. Fish numbers as well as biomass were lowest in January 2002. Species richness, number of individuals and biomass of fishes in an eelgrass bed were significantly higher than those of in unvegetated area. These result suggest that differences in fish species richness and abundances are primarily related to habitat structure. Different habitat preferences were evidenced for the juveniles and adult of several fish species.

• Journal of Biomedical Engineering Research
• /
• 제17권3호
• /
• pp.327-336
• /
• 1996

This study was performed to investigate the effec% of immersion in water and thermal cycling on the mechanical peoperties of light cured restorative composite resins. Five commerically available light-cured composite resins(Photo Clearfil A : CA, Lite-Fil A . LF, Clearril Photo Posterior CP, Prisms AP.H.. PA, 2100 : ZH) were unto The specimens of 12 m in diameter and 0.7 m in thickness were made, and an immersion in $37^{\circ}C$ water for 7 days and a thermal cycling of 1000 cycles at 15 second dwell time each in $5^{\circ}C$ and $55^{\circ}C$ baths were performed. Biaxial flexure test was conducted using the ball-on-three-ball method at the crosshead speed of 0.5mm/min. In order to investigate the deterioration of composite resins during the thermal cycling test, Weibull analysis for the biaxial flexure strengths was done. Fracture surfaces and the surfaces before and after the thermal cycling test were examined by SEM. The highest Weibull modulus value of 10.09 after thermal cycling tests which means the lowest strength variation, was observed in the CP group, and the lowest value of 4.47 was obsered in the LF Group. Biaxial flexure strengths and Knoop hardness numbers significantly decreased due to the thermal cycling ($\textit{p}$< 0.01), however, they recovered when specimens were drie4 The highest biaxial flexure strength of 125.65MPa was observed in the ZH group after the thermal cycling test, and the lowest value of 64.86MPa was observed in the CA group. Biaxial flexure strengths of ZH and CP groups were higher than those of PA, CF, and CA groups after thermal cycling test($\textit{p}$< 0.05). Knoop hardness numbers of CP group after the thermal cycling test was the highest(95.47 $\pm$ 7.35kg/$mm^2$) among the samples, while that of CA group was the lowest(30.73 $\pm$ 2.58kg/$mm^2$). Knoop hardness numbers showed the significant differences between the CP group and others after the thermal cycling test(($\textit{p}$< 0.05). Fracture surfaces showed that the composite resin failure developed along the matrix resin and the filler/resin interface region, and the cracks propagated in the conical shape from the maximum tensile stress zone.

• Journal of Ecology and Environment
• /
• 제43권1호
• /
• pp.43-60
• /
• 2019

Background: Tropical montane forests played an important role in the provision of ecosystem services. The intense degradation and deforestation for the need of agricultural land expansion result in a significant decline of forest cover. However, the expansion of agricultural land did not completely destruct natural forests. There remain forests inaccessible for agricultural and grazing purpose. Studies on these forests remained scant, motivating to investigate biomass and soil carbon stocks. Data of biomass and soils were collected in 80 quadrats ($400m^2$) systematically in 5 forests. Biomass and disturbance gradients were determined using allometric equation and disturbance index, respectively. The regression modeling is employed to explore the spatial distribution of carbon stock along disturbance and environmental gradients. Correlation analysis is also employed to identify the relation between site factors and carbon stocks. Results: The result revealed that a total of 1655 individuals with a diameter of ${\geq}5cm$, representing 38 species, were measured in 5 forests. The mean aboveground biomass carbon stocks (AGB CS) and soil organic carbon (SOC) stocks at 5 forests were $191.6{\pm}19.7$ and $149.32{\pm}6.8Mg\;C\;ha^{-1}$, respectively. The AGB CS exhibited significant (P < 0.05) positive correlation with SOC and total nitrogen (TN) stocks, reflecting that biomass seems to be a general predictor of SOCs. AGB CS between highly and least-disturbed forests was significantly different (P < 0.05). This disturbance level equates to a decrease in AGB CS of 36.8% in the highly disturbed compared with the least-disturbed forest. In all forests, dominant species sequestrated more than 58% of carbon. The AGB CS in response to elevation and disturbance index and SOC stocks in response to soil pH attained unimodal pattern. The stand structures, such as canopy cover and basal area, had significant positive relation with AGB CS. Conclusions: Study results confirmed that carbon stocks of studied forests were comparable to carbon stocks of protected forests. The biotic, edaphic, topographic, and disturbance factors played a significant variation in carbon stocks of forests. Further study should be conducted to quantify carbon stocks of herbaceous, litter, and soil microbes to account the role of the whole forest ecosystem.

• Korean Journal of Animal Reproduction
• /
• 제10권1호
• /
• pp.49-57
• /
• 1986

Studies were conducted to investigate the relationship between hormone leveles and nutritional levels for improving performance of Cheju native cattle. In June 1984 a trial was initiated using 8 Cheju native calves after weaning, fed at two su, pp.ementary feeding levels (NRC 100% and 70%). The body weight, breedng performence, change in progesterone level during pregnancy and estrus cycle were evaluated. Mean body weight at 6 months of age was 155kg when fed 100% NRC ration but it was only 137kg when heifers received the 70% NRC ration. At 10, 15 and 20 months of age the body weight was 66, 160 and 115kg, respectively, showing that heifers fed the standard ration gained weight rapidly (P<0.01). Average size of the lefe ovary in the standard group was 2.1${\times}$1.6cm and right ovary was 2.6${\times}$1.8cm. However in the restricted feeding group the ovaries were found to be smaller. Diameter of graffian follicles showed a similar tendency to ovarian size in the two groups. The first oestrus in the standard feeding group a, pp.ared at 14.6 months when body weight was 265kg. Age at first calving was on average 28.9 months at a body weight of 436kg. On the other hand when heifers were fed the restricted ration the first oestrus a, pp.ared at 23.0 months at a body weight of 250kg. Average age at first calving was 38.9 months which was 10 months later than the average in the standard feeding group (P<0.01). In standard feeding group the progesterone level was 2.0ng/ml at two weeks after pregnancy and gradully increased up to 4 weeks and peaked at 18 weeks. This peak (6.4-6.5ng/ml) was maintained up to 24 weeks when progesterone level decreased until it reached 2.1ng/ml at the end of pregnancy. In the restricted group progesterone level up to 16 weeks followed a similar pattern to the standard group but there was a tendency in the restricted group to have lower progesterone levels(P<0.01). The standard and srstricted groups showed similar patterns of progesterone concentration during the oestrus cylce. There were no statistically significant differences in progesterone levels between standard and restricted groups but there was variation between induvidual animals.

• Korean Journal of Radiology
• /
• 제24권10호
• /
• pp.1006-1016
• /
• 2023

Objective: Computed tomography (CT) is an established method for the diagnosis, staging, and treatment of multiple myeloma. Here, we investigated the potential of photon-counting detector computed tomography (PCD-CT) in terms of image quality, diagnostic confidence, and radiation dose compared with energy-integrating detector CT (EID-CT). Materials and Methods: In this prospective study, patients with known multiple myeloma underwent clinically indicated whole-body PCD-CT. The image quality of PCD-CT was assessed qualitatively by three independent radiologists for overall image quality, edge sharpness, image noise, lesion conspicuity, and diagnostic confidence using a 5-point Likert scale (5 = excellent), and quantitatively for signal homogeneity using the coefficient of variation (CV) of Hounsfield Units (HU) values and modulation transfer function (MTF) via the full width at half maximum (FWHM) in the frequency space. The results were compared with those of the current clinical standard EID-CT protocols as controls. Additionally, the radiation dose (CTDIvol) was determined. Results: We enrolled 35 patients with multiple myeloma (mean age 69.8 ± 9.1 years; 18 [51%] males). Qualitative image analysis revealed superior scores (median [interquartile range]) for PCD-CT regarding overall image quality (4.0 [4.0-5.0] vs. 4.0 [3.0-4.0]), edge sharpness (4.0 [4.0-5.0] vs. 4.0 [3.0-4.0]), image noise (4.0 [4.0-4.0] vs. 3.0 [3.0-4.0]), lesion conspicuity (4.0 [4.0-5.0] vs. 4.0 [3.0-4.0]), and diagnostic confidence (4.0 [4.0-5.0] vs. 4.0 [3.0-4.0]) compared with EID-CT (P ≤ 0.004). In quantitative image analyses, PCD-CT compared with EID-CT revealed a substantially lower FWHM (2.89 vs. 25.68 cy/pixel) and a significantly more homogeneous signal (mean CV ± standard deviation [SD], 0.99 ± 0.65 vs. 1.66 ± 0.5; P < 0.001) at a significantly lower radiation dose (mean CTDIvol ± SD, 3.33 ± 0.82 vs. 7.19 ± 3.57 mGy; P < 0.001). Conclusion: Whole-body PCD-CT provides significantly higher subjective and objective image quality at significantly reduced radiation doses than the current clinical standard EID-CT protocols, along with readily available multi-spectral data, facilitating the potential for further advanced post-processing.