• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.337-342
• /
• 1989

The control of a pH value in radwaste treatment process is difficult due to the nonlinearity of the titration curve and its strong sensivity to disturbances. This paper describes an adaptive control strategy which is model-based and allows for direct use of available measurements. This algorithm forces the nonlinear process to follow a desired linear system trajectory, and were applied to the control of a simulated pilot-scale pH process. The simulation study showed that it has the potential advantage over the transformation methods that control effort saturation can be accomodated readily.

• Korean Journal of Mathematics
• /
• v.24 no.2
• /
• pp.297-305
• /
• 2016

In this paper, by using fixed point theorem, we obtain the stability of the following functional equations $$f(pr,qs)+g(ps,qr)={\theta}(p,q,r,s)f(p,q)h(r,s)\\f(pr,qs)+g(ps,qr)={\theta}(p,q,r,s)g(p,q)h(r,s)$$, where G is a commutative semigroup, ${\theta}:G^4{\rightarrow}{\mathbb{R}}_k$ a function and f, g, h are functionals on $G^2$.

• Journal of Conservation Science
• /
• v.29 no.1
• /
• pp.47-54
• /
• 2013

The following study tests for the effects of mordants on the production of restoration papers during the conservation process of damaged paper artifacts. For this, four different types of synthetic mordants that are being marketed currently ($K_2CO_3$, $AlK(SO_4)_2{\cdot}12H_2O$, $Cu_2SO_4{\cdot}5H_2O$, $FeSO_4$) were selected to produce samples for measuring variable properties through artificial degradation. The research conducts tests for changes in color, tensile index, and pH level (degree of acidity). The results for changes in color have shown that the value of ${\Delta}E^*ab$ of $K_2CO_3$ mordant sample was the highest, and the tests for tensile index have shown that the strength of dyeing sample was decreased in accordance with the aging time, but Changes according to the mordant was not evident. Finally, the findings for pH level have shown that samples with $Cu_2SO_4{\cdot}5H_2O$ and $FeSO_4$ have pH levels drop below 6. As a result, the research have concluded that mordants used for dyeing restoration paper were identified to have an affect in the dyeing and aging characteristics of the paper.

• Journal of Korea Foresty Energy
• /
• v.23 no.1
• /
• pp.38-44
• /
• 2004

The application of the dispersant is indispensable to the manufacture of Korean traditional paper (Hanji). However the mucilage of which extracted from Abelmoschus manihot root has viscosity drop problem in summertime and synthetic dispersant such as polyacrylamide (PAM) and polyethyleneoxide (PEO) have some problems that under the influence of the quality of. water, cohesion, and bad solubility. This study was carried out not only to develop new natural dispersant that can solve such problems but also to investigate the viscosity and papermaking characteristics of Hydrangea paniculata mucilage. There were no viscosity changes between control and treated mucilage that adjusted to pH 9, heated 6 hours at 40 $^{\circ}C$, and stored heating treatment one for a week at 5 $^{\circ}C$. The treatment of mucilage that adjusted to pH 9 and aged for 120 hours at 4$0^{\circ}C$ resulted in viscosity drop. In the hydrolysis of mucilage, galacturonic acid and glucuronic acid contents were decreased by heating and pH adjusting treatments. Wet web stripping quality and physical properties of Korean traditional paper, which used Hydrangea paniculatamucilage were same or superior to the Abelmoschus manihot root.

• Journal of Adhesion and Interface
• /
• v.4 no.3
• /
• pp.9-13
• /
• 2003

In this paper, the effects of crosslinking agent and pH controlling agent on adhesive properties and water solubility of water soluble acrylic pressure sensitive adhesives were studied by adding the crosslinking agents or pH controlling agents after the polymerization. the tack, cohesive strength, and peel strength were measured to evaluate adhesive properties. the turbidity was also measured to evaluate water solubility of pressure sensitive adhesives. When crosslinking agent was added less than 0.2 wt%, tack increased and cohesive strength and peel strength decreased with increasing concentration. When crossinking agent was added more than 0.2 wt%, the results were opposited. When pH controlling agent was added, tack and water solubility decreased and peel strength and cohesive strength increased with increasing concentration. the influence of pH controlling agents on adhesive properties and water solubility of pressure sensitive adhesive increased in the order of lithium hydroxide, potassium hydroxide and sodium hydroxide.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05b
• /
• pp.132-136
• /
• 2002

In this paper, aging characteristics of outdoor silicone rubber insulator resulting from the acid rain have been investigated with regards to nitrate ion $({NO_{3}}^{-1})$. For this purpose, silicone rubber was aged by immersing into the nitric solutions with different level pH during 1500 hours and various tests (tracking, $tan{\delta}$, breakdown voltage, SEM, EDS, contact angle) were performed. It was observed that the degradation was increased to pH 2.5 slightly and at pH 1.5 highly. And thus, it could be expected that there is certain critical point between pH 1.5 and 2.5, which leads to throught degradation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.09a
• /
• pp.28-33
• /
• 2001

In this paper, aging characteristics of outdoor silicone rubber insulator resulting from the acid rain have been investigated with regards to nitrate ion ($NO^{-1}_{3}$ ). For this purpose, silicone rubber was aged by immersing into the nitric solutions with different level pH during 1500 hours and various tests (tracking, tan $\delta$, breakdown voltage, SEM, EDS, contact angle) were performed. It was observed that the degradation was increased to pH 2.5 slightly and at pH 1.5 highly. And thus, it could be expected that there is certain critical point between pH 1.5 and 2.5, which leads to throught degradation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.4 s.112
• /
• pp.1-7
• /
• 2005

This study was carried out to investigate the characteristics of extracellular cellulase and xylanase from Fusarium pallidoroseum and Aspergillus niger, such as enzyme activity and stability by various pH, temperature and metal ions, for application into enzymatic deinking system. The optimal temperature and pH for enzyme activity and stability of Fusarium pallidoroseum and Aspergillus niger were $50^{\circ}C$, pH 5.0 and $60^{\circ}C$, pH 9.0, respectively. Certain metal ions, calcium and cobalt, brought to elevate cellulase and xylanase activity from F. pallidoroseum and A. niger. With these results we suggest that enzymatic deinking system should be proceed at $50\~60^{\circ}C$ under their optimal pH condition.

• 보존과학연구
• /
• s.19
• /
• pp.3-22
• /
• 1998

The effect of pH on degradation of paper by some fungi, which able to degrade cellulose, was investigated. Trichoderma koningii, Aspergillus nigerand Penicillium nigulosum were cultured at $28^{\circ}C$ for 16 days in the selective medium (PH3, PH4, PH5, PH6, PH7, PH8, PH9, PH10, PHC) containing paper as substrate. Each paper was pretreated with each pH buffer (pH 3∼pH 10, D.W.)prior to addition to the selective medium. Enzyme activities in the each culture medium were measured spectroph to metrically using C.M.C., Avicel, PNPG as the substrates for endoglucanase, exoglucanase and $\beta$-glucosidase, respectively. In all experimental fungi, the enzyme activities of PH3 and PH9 medium were usually much higher than those of other experimental groups. However in the PH6medium, enzyme activity was lower than other groups. To analyze the concentration and pattern of protein in the each culture medium, the medium was concentrated by lyophilization. The protein concentration of PH3 and PH9 medium were relatively high (T.koningii; 6.31mg, 6,19mg, A.niger; 1.62mg, 1.96mg, P.nigulosum;2.50mg, 2.73mg, respectively), but that of PH6 was relatively low. The protein pattern of each medium was analyzed by using SDS-PAGE and VDS Image Master Analysis Program. The concentrations of bands in the each lane were usually high at lane2 (PH3) and lane8 (PH9) and low at lane5 (PH6). Therefore, the incresed cellulolytic activity of fungus against acidified paper could be result of structural change and deterioration of paper caused by being acidified.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2002.05a
• /
• pp.108-108
• /
• 2002

고분자전해질들은 제지공정에서 건조지력제, 습윤지력제, 정착제, 보류제 등으로 널리 사 용되어지고 있으며, 이러한 고분자전해질들이 보유하고 있는 관능기의 종류와 분자량에 따라 각각의 다른 특성을 발현하게 된다. 이중 관능기의 종류와 비율에 따라 결정되는 중요한 특성 중 한가지가 전하밀도이며, 이러한 전하밀도는 제지공정에 사용할 때 습부공정에서 매우 중요 한 인자라 할 수 있다. 전하밀도는 고분자전해질의 분자구조와 단량체의 종류에 따라 다르며, 적용 pH의 조건에 따라 변화하게 된다. 3급 아민과 4급 암모늄을 관능기로 가진 고분자전해질 의 경우 pH에 따른 전하밀도의 변화는 이미 잘 알려져 있는 바,3급 아민을 작용기로 가진 양이 온성 고분자전해질은 pH 9에 도달하면 양전하를 완전히 상실하고,4급 암모늄을 작용기로 가진 양이온성 고분자전해질은 pH의 변화에 상관없이 양전하가 변하지 않는다고 보고되어 있다. 본 연구에서는 양이온성과, 양쪽이온성 고분자전해질들 중 Cationic PAM, Amphoteric P PAM, PolyDADMAC, Epoxide polyamide resin, Epi-DMA copolymer 등을 시 료로 사용하였 으며, 양이온성 관능기의 종류가 다른 고분자 전해질을 이용하여 pH 변화에 따른 전하밀도의 변화를 검토하였다. 또한 일반적으로 중성 초지공정의 pH 조건은 7.0 - 8.0이며, 이 pH 조건에 서 고분자전해질의 거동은 매우 중요하다고 할 수 있다. 따라서 양이온 관능기의 종류에 따른 고분자전해질들을 pH 7.8에서 보관시간에 따른 전하밀도의 변화를 조사하였으며, 전하밀도가 변화하는 양상에 따라 양이온성 관능기의 분자구조의 변화를 검토하였다. p pH 변화에 따른 전하밀도의 변화 결과로부터 3급 아민을 포함한 양이온성 고분자전해질 뿐만 아니라,4급 암모늄을 포함한 일부의 양이온성 고분자전해질 또한 알카리 조건에서 전하 밀도가 감소하며, 강한 얄차리 조건에서는 음이온성 고분자전해질로 변화하는 현상을 관찰할 수 있었다. 이상의 결과들로부터 약 알카리(pH 7.5 - 8.0) 조건 하에서도 시간의 변화에 따라 4 급 암모늄을 포함하는 고분자전해질의 전하밀도가 변화할 것이라 예측하였으며, 실험을 통해 그 사실을 확인하였다. 알카리 조건에서 전하밀도가 변하지 않는 4급 암모늄 고분자전해질과, 전하밀도가 변하는 4급 암모늄 고분자전해질의 분자구조를 비교해 볼 때, 그 원인은 4급 암모늄 의 관능기가 고분자 연쇄로부터 가수분해 되어 나타나는 현상으로 판단된다.