• Korean Chemical Engineering Research
• /
• v.44 no.5
• /
• pp.476-482
• /
• 2006

This paper studied the recovery of organic acid from organic acid salt by using bipolar membrane electrodialysis. Acetic acid and lactic acid was used as for organic acid. Organic acid concentration, sodium hydroxide concentration and pH values were measured at various current density. Organic acid salt was effectively converted to organic acid and sodium hydroxide. Based on the experimental results, mathematical models were developed, in which time changes in ion balance were considered. Model predictions of organic acid concentration, sodium hydroxide concentration and pH values were in good agreement with the experimental data.

• KSBB Journal
• /
• v.19 no.3
• /
• pp.231-235
• /
• 2004

This paper was investigated to clarify the possibility of ammonia gas removal by essential oil. First of all, the chemical analysis was peformed to analyze the composition of an essential oil by GC-MS. The monoterpenes in an essential oil react with ammonia by neutralization and their reaction mechanism was elucidated. Based on their chemical neutralized reaction, the removal efficiencies of ammonia gas were studied to derive the optimal conditions in the scrubber tower such as optimal temperature and pH. The experimental result shows that the removal efficiency of ammonia gas was achieved over 98 % by the misty aerosol dispersion of scrubber tower.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.4
• /
• pp.403-409
• /
• 1989

Dietary fiber(DF) content and their properties were analyzed in some common vegetables such as Squash(leaf), Water cress, Garland chrysanthemum, Leek and sweet potato(stem). DF was analyzed by the method of detergent fractionation. Values for neutral detergent fiber(NDF), acid detergent fiber(ADF), lignin, hemicellulose were obtained. NDF for most samples was $13.83%{\sim}24.31%$, ADF was $11.99%{\sim}21.03%$, lignin was around $0.56%{\sim}3.00%$, hemicellulose was about $1.33%{\sim}3.88%$, cellulose was $9.08%{\sim}14.87%$ except sweet potato(leaf) (20.47%). This paper describes two properties of the fiber-of commonly eaten vegetables ; water-holding capacity(WHC) and metal binding. The capacity of the acetone dried powder (ADP) to hold water was estimated. The WHC measurements differed from 7.49 per 9 of ADP for Water cress to 11.09 per 9 of ADP for Leek. The binding of Fe, Zn in NDF. ADF obtained from five fiber sources was examined under two pH conditions ; 1) pH2.1, 2) pH6.1. Fe, Zn binding increased with higher pH and differed from DF sources.

• Journal of Power System Engineering
• /
• v.18 no.2
• /
• pp.37-42
• /
• 2014

The purpose of this paper is to investigate polarization characteristics of heat-treated Ni-based self-flux alloy coating in alkaline solution. Ni-based self-flux alloy powder was sprayed to a steel substrate using flame spray process, and heat treatments were performed in a vacuum furnace at $800^{\circ}C$, $900^{\circ}C$, $1000^{\circ}C$ and $1100^{\circ}C$. After heat treatments, corrosion tests were carried out using potentiostat/galvanostat at solution with pH 8 and pH 13. Corrosion potential(Ecorr) and corrosion current density(Icorr) could be analyzed from polarization curve. Anticorrosive effect of heat-treated coating at solution with pH 8 was relatively greater than at solution with pH 13. Heat-treated coating at $1100^{\circ}C$ showed the greatest anti-corrosion characteristics in alkaline solution.

• Resources Recycling
• /
• v.26 no.2
• /
• pp.3-10
• /
• 2017

Rare earth elements with high purity are demanded for the manufacture of advanced materials. Light rare earth elements are contained in domestic monazite and Ni-MH batteries. In this paper, solvent extraction to separate the light rare earth elements from hydrochloric acid leaching solutions of these resources was discussed. A mixture of cationic and tertiary amine shows synergistic effect on the extraction of LREEs and the extent of pH decrease during extraction is reduced. The effect of solution pH on the extraction and synergism was reviewed. Acquisition of the operation data with mixer-settler on the separation of LREEs by this mixture is necessary to develop a process.

• Conservation Science in Museum
• /
• v.1
• /
• pp.43-51
• /
• 1999

This is a brief study on the influence of fumigation (using mixed gas of methyl bromide and ethylene oxide) on old paintings. Fumigation is principally used to prevent biological damage of objects. Thirteen objects, including old colored map from Chosǒn Dynasty and some paintings, were selected for this research. Before and after fumigation, color measurements were made and changes of pH value were measured. The result is that the fumigation did not affect on discoloration of colored area and acidity of paper, as far as the standard of application(such as concentration of gas, exposing time and ect.) of fumigation was kept.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.4 s.117
• /
• pp.53-60
• /
• 2006

Paper materials for long term conservation suffer slowly mechanical and chemical deterioration, the extent of which may depend upon their conservation environment. Those deterioration includes discoloring, low moisture content, acidification, and brittleness. To slow deterioration, washing treatment, deacidification, and polymer reinforcement on paper materials are usually used. One easy and simple method of fixing low moisture content and acidification was an washing method, and we used both distilled and alkali water in washing method in this study. Alkali water is electrolyzed cathode water of high pH, and has no alkali metal ions in it. Experiment showed that washing treatment with both distilled and alkali water gave improvement in raising moisture content, pH, and mechanical strength of paper materials even after severe accelerated aging test. Advantageous effect of alkali water over distilled water on preventing deterioation was also shown clearly.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.477-482
• /
• 2005

Recently, client computing trend has been changed from server oriented information application to network based P2P(Peer to Peer) services. The conventional client/server method has the merit of accessing abundant information, on the other side P2P has the merit of synchronized community support and information exchange. P2P has four meaning of point to point, peer to peer, person to person and path to profitability. In manufacturing system field, the second meaning is interested. P2P is classified to three type such as conventional client/server, hybrid P2P and pure P2P. The third is really peer to peer concept. The related technologies with P2P are P2P searching, XML, cooperation, IPv6, computing sharing and P2P communication. This paper describes the scheme of P2P and related contents. And through the P2P based technology, a P2P-based collaborative machine and a vertical portal machine are introduced in this paper. The scheme of the machines mentioned above is suggested for cooperation in manufacturing system and u-Manufacturing.

• Journal of the Korean Statistical Society
• /
• v.25 no.4
• /
• pp.457-469
• /
• 1996

In this paper, we propose a method for an exact test of H : $p_i$ = $r_i$ for all i against K : $p_i$ $\neq$ $r_i$ for some i in an unbalanced random effect linear model, where $p_i$ denotes the ratio of the i-th variance component to the error variance. Then we present a method to test H : $p_i$ $\leq$ r against K : $p_i$> r for some specific i by applying orthogonal projection on the model. We also show that any test statistic that follows an F-distribution on the boundary of the hypotheses is equal to the one given here.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.290-295
• /
• 1992

Tendon driven method to drive one joint using two actuators is developed and implemented. While the method has advantages over conventional transmissions, it also has several drawbacks like tendon slack, elongation and endurability. In this paper, a compensation method of the intrinsic non-linearities of tendon is proposed to improve the performance of antagonistic tendon driven method. In this method, tendon tension measurement is prerequisite which is measured with strain gauge type tension sensor. The developed method is implemented on one link test bed with colocated and non-colocated position sensor.