• Journal of the Korean Applied Science and Technology
• /
• v.24 no.2
• /
• pp.205-210
• /
• 2007

In this paper, we describe a study on the relationship between neutral emulsion manufacture and hardening test of films. The hardeners were prepared by condensation of equimolar amounts of trichlorotriazine with benzene- or naphthalene-based amino or oxy acids at 0 to $5^{\circ}C$ and at pH 7, and used as hardening agents for gelatin. The hardening test of neutral emulsion layers was studied at pH 7.0. For example I(R=ONa) had strong hardening properties, I substituted with an aminobenzosulfonate moiety $(R=NHC_6H_4-p-SO_3Me$ where Me = K, Na) was a much weaker gelatin hardener, and when substituted with amino- or oxynaphthalene derivative (II, III) did not harden gelatin at all. Compound with 2 dichlorotriazine groups as IV exhibited hardening properties. The hardener can be used in neutral emulsion layer of film and showed good hardening effect.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.605-606
• /
• 2006

CMP(chemical mechanical polishing) process has been attracted as an essential technology of multi-level interconnection. However, the COO(cost of ownership) is very high, because of high consumable cost. Especially, among the consumables, slurry dominates more than 40 %. So, we focused how to reduce the consumption of raw slurry. In this paper, $ZrO_2$,$CeO_2$, and $MnO_2$ abrasives were added de-ionized water (DIW) and pH control as a function of KOH contents. We have investigate the possibility of new abrasive for the oxide CMP application.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2237-2238
• /
• 2006

CMP(chemical mechanical polishing) process has been attracted as an essential technology of multi-level interconnection. However, the COO(cost of ownership) is very high, because of high consumable cost. Especially, among the consumables, slurry dominates more than 40 %. So, we focused how to reduce the consumption of raw slurry. In this paper, $ZrO_2$, $CeO_2$, and $MnO_2$ abrasives were added de-ionized water (DIW) and pH control as a function of KOH contents. We have investigate the possibility of new abrasive for the oxide CMP application.

• The Journal of Information Technology
• /
• v.10 no.2
• /
• pp.29-35
• /
• 2007

In this paper, we describe a study on the relationship between alkaline magenta emulsion manufacture and hardening test of films. The hardeners were prepared by condensation of equimolar amounts of trichlorotriazine with benzene-or naphthalene-based amino or oxy acids at 0 to $5^{\circ}C$ and at pH 7, and used as hardening agents for gelatin. The hardening test of alkaline magenta emulsion was studied at pH 8.5. For example I(R=ONa) had strong hardening properties, I substituted with an aminobenzosulfonate moiety (R=NHC6H4-p-SO3Me where Me = K, Na) was a much weaker gelatin hardener, and when substituted with amino- or oxynaphthalene derivative (II, III) did not harden gelatin at all. Compound with 2 dichlorotriazine groups as IV exhibited hardening properties. The hardener can be used in alkaline magenta emulsion layer of film and showed good hardening effect.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.125-128
• /
• 2003

In this paper, we propose two methods for complexity reduction of intra prediction in H.264/AVC. One is skipping of intra prediction using inter prediction cost at current macroblock in current P picture, average of intra prediction cost in previous I picture, and average of inter prediction cost in previous P picture. The other is skipping of intra 16$\times$16 prediction using intra 4$\times$4 prediction cost and modes. As a result, complexity of intra prediction in P picture and that of intra 16$\times$16 prediction in intra prediction macroblock can be reduced by about 80~99％ and 50~93％, respectively.

• Textile Coloration and Finishing
• /
• v.16 no.3
• /
• pp.1-7
• /
• 2004

To study the dyeability(K/S value) and surface color of silk fabrics dyed with Impatiens balsamina extract, its flower, leaf and stem, was extracted by water. This paper investigated some experiments with Impatiens balsamina extract under the various dyeing conditions such as dyeing temperature, dyeing time, repetition of dyeing, dyeing pH with silk fabrics. The results obtained were as follows. 1. It was found that it $\lambdamax$. of silk fabrics dyed with Impatiens balsamina extract was 260nm and its flower, leaf, stem and flowers(white, pink, violet) had same it $\lambdamax$ at 260nm. 2. K/S value was increased when dyeing temperature, repetition of dyeing and time was higher, value of munsell of silk fabrics dyed with Impatiens balsamina extract was yellow-red. dyeing temperature, repetition of dyeing and time was higher, shifted to longer wavelength side. 3. pH added acetic acid was colored reddish yellow-red, but pH added alum was colored yellowish yellow-red in silk fabrics dyed with Impatiens balsamina extract and repetition of dyeing was increased the dye-uptake.

• KSBB Journal
• /
• v.14 no.4
• /
• pp.482-489
• /
• 1999

As host for the production of eucaryotic heterologous proteins, methylotrophic yeast Pichia pastoris and Hansenula polymorpha are the most highly developed of a small group of alternative yeast species chosen for their perceived advantages. This paper describes the method to enhance the recombinant protein productivity with P. pastoris and H. Plymorpha. In these experiments, the effects of methanol induction timing, induction method, pH, culture temperature and kinds of nitrogen sources on foreign protein production were tested with P. pastoris and compared with H. polymorpha.. In addition, optimum methanol concentration as inducer and the effects of carbon sources on AOX1 or MOX promoter repression and secretion efficiency were also studied in both cases.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1271-1272
• /
• 2006

CMP(chemical mechanical polishing) process has been attracted as an essential technology of multi-level interconnection. However, the COO(cost of ownership) is very high, because of high consumable cost. Especially, among the consumables, slurry dominates more than 40%. So, we focused how to reduce the consumption of raw slurry. In this paper, $ZrO_2$, $CeO_2$, and $MnO_2$ abrasives were added de-ionized water (DIW) and pH control as a function of KOH contents. We have investigate the possibility of new abrasive for the oxide CMP application.

• Journal of the Korean Chemical Society
• /
• v.6 no.1
• /
• pp.61-63
• /
• 1962

The polarographic behaviors of Tl(I) was investigated in EDTA and NTA as supporting electrolytes for determination of Tl(I). A base solution containing 0.005 % gelatine, 0.1 M EDTA, and 0.05 M NTA was used. The halfwave potential of Tl(I) determined is -0.495 V v.s. S.C.E. in 0.1 M EDTA at pH 4.1 and -0.520V v.s. S.C.E. in 0.05 M NTA at pH 6.3. In this paper, the effects of gelatine concentration and pH values was investigated. The half-wave potentials of common elements was determined and compared with the half-wave potential of Tl(I).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.2
• /
• pp.417-422
• /
• 1999

Algin and chitosan are known as biodegradable natural polymers. PVA is useful for the production of water soluble packaging, paper, textile sizes. PVA/Algin and PVA/chitosan films were prepared by solution blends method in the weight ratio of chitosan, algin for the purpose of useful biodegradable films. Thermal and mechanical properties of blend films such as DSC, impact strength, tensile strength and morphology by SEM were determined. As a result, The ratio of 10.0wt% PVA/chitosan films were similar to PVA at thermal and mechanical properties. PVA/Algin films were found that phase separation was occured as more than 25wt% increasing the blend ratio of algin. PVA/Algin films were observed to be less partially compatibility than 10wt% increasing the blend ratio of algin by DSC, mechanical properties and SEM. Blend films were completely degraded pH 4.0 better than 7.0, 10.0 in the buffer solution. Also, they were rapidly degraded in the enzyme( glucosidase) solution better than pH solution by enzymolysis.