• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.517-518
• /
• 2008

Highly integrated ISFETs require the monolithic implementation of ISFETs, CMOS electronics, and additional sensors on the same chip This paper presents novel packaging type of CMOS ISFET pH sensor using standard CMOS FET chip and extended sensing membrane which is separated from CMOS FET. This proposed packaging type will make it easy to fabricate CMOS ISFET pH sensors

• BMB Reports
• /
• 제35권4호
• /
• pp.384-388
• /
• 2002

A method for the ratiometric pH sensing using LysoSensor DND-192 is presented in this paper. It works in the physiological pH range. It is based on the use of two fluorophores which differ significantly in their lifetimes. As the discrimination of their emissions is performed through two different frequencies, this method can allow significant overlap of the emission spectra. A simple long-pass filter, or a combination of long-and short-pass filters, was used instead of narrow-bandpass devices. Importantly, the measurements were carried out under strong ambient light. The method could be used in a wide variety of applications, such as intracellular measurements, microscopy, bioprocess monitoring, etc.

• Journal of Microbiology and Biotechnology
• /
• 제2권1호
• /
• pp.7-13
• /
• 1992

A moderately thermophilic, alkalophlic and powerful crystalline cellulose-digesting bacterium, Bacillus K-12, was isolated from filter paper wastes and found to be similar to Bacillus circulans or Bacillus pumilis, except for its ability to grow at a moderately high pH and temperature. The isolate grew at a pH ranging from 6 to 10 and at a temperature ranging from 35 to $65^{\circ}C$ and produced a large amount of cellulase components containing avicelase, xylanase, CMCase, and FPase when grown in avicel medium for 5 to 7 days at $50^{\circ}C$. The crude enzyme preparation from the culture broth hydrolyzed xylan, raw starch, pullulan and ${\beta}-1,3$ glucan such as laminarin. Furthermore, the enzyme hydrolyzed crystalline cellulose to cellobiose and glucose and had a broad pH activity curve (pH 6~9). The enzyme was stable up to $70^{\circ}C$.

• 한국환경보건학회지
• /
• 제19권4호
• /
• pp.44-50
• /
• 1993

This paper has concentrated on estimating the improvement of sludge dewaterability for the application of ozone in sewage treatment plant sludge. The experiment for the study was conducted by batch reactor, contacting ozone (5.0 g O$_3$/hr/l) to waste sludge and measured the Specific Resistance to Filtrate (SRF) varying pH, pressure and reaction time of ozone. And then checked the dissolved solids concentration of flitrate. The results of experiment were as follows: 1. When the total solids concentration of excess sludge was 9, 000 mg/l, the optimum injection rate of ozone was 5.0 g O$_3$/hr/l, and then pressure was 50 cm Hg for the measuring SRF. 2. In the range of pH 3~5, the effect of ozone injection was excellent, but it was unsatisfactory in the range of pH 9~11. Therefore, the ozone injection by acidifying pH level was effective in improving the dewaterability of sludge. 3. It was estimated that the dissolved solids concentration of flitrate was increased in proportion to the injection rate of ozone.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.40-44
• /
• 2014

The purpose of this paper is to investigate polarization characteristics of WC-based alloy coatings in alkaline solution. The coatings were fabricated with WC-CrC-Ni, WC-Co-Cr and WC-Co composite powders by HVOF process. Corrosion tests of coatings and substrate were carried out using potentiostat/galvanostat at solution with pH 8 and pH 13. Corrosion potential(Ecorr) and corrosion current density(Icorr) could be studied from polarization curve, and corrosion behavior was analyzed by SEM and EDS. WC-Co-Cr coating and WC-CrC-Ni coating showed more favorable anti-corrosion characteristics than WC-Co coating and substrate at solution with pH 8 and pH 13.

• 한국염색가공학회지
• /
• 제9권6호
• /
• pp.33-41
• /
• 1997

This paper surveys the extraction condition of polygenetic natural dye, Sappan Wood and the effect of ash to the dyeability and fastness. The appropriate time for extracting Sappon Wood was 1hour. The pH was increased as the amount of ash increase. The pH was nearly invariable according to the time of ash solution, the extracting times and temperature. Absorbance of dyeing fabrics was about 480nm. From the result of K/S value determination of fabrics, 10g/$\ell$ quantity of ash was surfficient for treatment and the amount of Sappon Wood was in 100% o.w.f.. K/S value of fabrics pre-mordanted or post-mordanted were higher than that of fabrics simultaneous mordanted.K/S value was increased as pH of mordanting bath decrease and pre-mordanting and post-mordanting fabrics increased the amount of absorption (K/S value) compared with non-mordanted fabrics. It was found that pH of mordanting bath affected the amount of absorption and color change of dyed fabrics. Light fastness of fabric dyed was very poor and the fastness of fabric dyed was not influenced by the mordanting conditions and methods.

• Corrosion Science and Technology
• /
• 제12권6호
• /
• pp.280-287
• /
• 2013

Flow accelerated corrosion(FAC) of the carbon steel piping in pressurized water reactors(PWRs) has been major issue in nuclear industry. Severe accident at Surry Unit 2 in 1986 initiated the worldwide interest in this area. Major parameters influencing FAC are material composition, microstructure, water chemistry, and hydrodynamics. Qualitative behaviors of FAC have been well understood but quantitative data about FAC have not been published for proprietary reason. In order to minimize the FAC in PWRs, the optimal method is to control water chemistry factors. Chemistry factors influencing FAC such as pH, corrosion potential, and hydrazine contents were reviewed in this paper. FAC rate decreased with pH up to 10 because magnetite solubility decreased with pH. Corrosion potential is generally controlled dissolved oxygen (DO) and hydrazine in secondary water. DO increased corrosion potential. FAC rate decreased with DO by stabilizing magnetite at low DO concentration or by formation of hematite at high DO concentration. Even though hydrazine is generally used to remove DO, hydrazine itself thermally decomposed to ammonia, nitrogen, and hydrogen raising pH. Hydrazine could react with iron and increased FAC rate. Effect of hydrazine on FAC is rather complex and should be careful in FAC analysis. FAC could be managed by adequate combination of pH, corrosion potential, and hydrazine.

• 한국지반신소재학회논문집
• /
• 제14권1호
• /
• pp.23-32
• /
• 2015

본 연구에서는 지반 내 오염원제거와 저투수성 지반의 개량이 동시에 이루어 질 수 있는 연직배수시스템의 최적화 기술을 마련하기 위하여, 중금속 오염물질을 대상으로 미세유체 흐름실험을 수행하였으며, 그 결과를 바탕으로 pH조건에 따른 흐름특성을 분석하였다. 중금속 오염물에 대한 미세유체 흐름실험 결과, 소수성 성질이 반영되는 위치가 오염물의 흐름속도에 큰 영향을 미치는 것으로 분석되었으며, pH 조건이 흐름속도 변화에 영향인자로 작용하였다. 또한 복합 중금속 오염물인 경우에 pH가 염기성일수록 납의 흐름속도가 다소 증가하는 경향으로 나타났는데, 이는 납 오염물이 구리에 비하여 소수성 표면특성을 감소시킬 수 있음을 의미하는 결과라 할 수 있다.

• 접착 및 계면
• /
• 제11권3호
• /
• pp.89-99
• /
• 2010

본 논문에서는 poly(vinyl acetate-co-ethylene)을 산화, 환원 방법으로 중합할 때 poly(vinyl alcohol) (PVOH)이 최종 에멀젼의 물성에 미치는 영향과 pH의 변화가 최종 에멀젼의 물성에 미치는 영향에 대하여 알아보았다. 실험 결과 PVOH의 분자량이 에멀젼 성질에 크게 영향을 미쳤다. 분자량이 낮은 PVOH 이용 시는 점도가 낮은 제품을 얻었고, 분자량이 큰 PVOH를 이용 시는 높은 점도의 제품을 얻었다. 그러나 pH를 변화 시키면서 중합한 제품의 최종 성질은 PVOH에 대하여 다른 결과를 얻었다. 일반적으로 중합도가 높고 부분 검화물의 PVOH를 이용한 poly(vinyl acetate) 에멀젼 최종점도는 상대적으로 매우 높은 점도를 유지하는 데 비하여, VAE 에멀젼에서는 높은 pH에서 합성 시에는 낮은 에멀젼의 점도를 얻었다. 이것은 에멀젼 합성 중에 PVOH의 분자량의 저하에 의한 영향으로 판단된다. pH가 증가 할수록 그라프트율이 감소하고, 분자량이 감소하면서 점도가 낮아진다는 결과를 얻었다.

• 식물분류학회지
• /
• 제41권4호
• /
• pp.365-369
• /
• 2011

중국 연변지역에서 할미꽃속의 신잡종인 연변할미꽃(Pulsatilla ${\times}$ yanbianensis H.Z. Lv)을 새로이 발견하여 기재하였다. 연변할미꽃은 개화시 잎이 완전히 벌어져 분홍할미꽃과 유사하나, 꽃받침이 적자색이고 과실이 불임인 점에서 뚜렷이 구별된다. 연변할미꽃은 꽃받침과 화주가 흑적색인 가는할미꽃과 유사하나, 잎의 엽연에 짧은 털이 있고 개화시 잎이 완전히 벌어진 점에서 뚜렷하게 차이가 난다.