• 제목/요약/키워드: pH neutralization

검색결과 228건 처리시간 0.032초

Determining Optimum Condition of Acid Hydrolysis Technique for Food Waste Reduction

  • Kim, Eui Yeong;Choi, Young Gwang;Kim, Sung Chul
    • 한국토양비료학회지
    • /
    • 제50권6호
    • /
    • pp.606-614
    • /
    • 2017
  • Amount of food waste has been increased annually in Korea and re-use of food waste as a fertilizer or soil amendment in agricultural field has been studied. Therefore, main purpose of this research was to determine optimum condition of hydrolysis for food waste management. Three different solvents, HCl, $H_2SO_4$, and KOH, were used and varied concentration at the range of 10~30% and hydrolysis time at the range of 1~3 hours were evaluated. In general, reduction rate of food waste was increased when concentration of solvent and hydrolysis time was increased except when KOH was used. Among different solvents, concentration, and hydrolysis time, the highest reduction rate (97.79%) was observed when 30% of HCl was used with temperature of $140^{\circ}C$ at 2 hours of hydrolysis time. In addition, neutralization effect of alkalic materials, shell waste (SW) and egg shell (ES) was evaluated. Both SW and ES increased pH of finished acid hydrolysis solution up to 7.61 indicating that neutralization effect of SW and ES was sufficient for finished acid hydrolysis solution. Contents of organic matter was also at the range of 10.7~13.04% and 5.53~8.04% respectively when HCl and $H_2SO_4$ were used as solvent. Overall, hydrolysis technique can be used to manage food waste with selected optimum condition in this study and characteristics of finished hydrolysis solution after neutralization might be suitable for soil amendments.

Electrodialysis of metal plating wastewater with neutralization pretreatment: Separation efficiency and organic removal

  • Park, Yong-Min;Choi, Su-Young;Park, Ki-Young;Kweon, Jihyang
    • Membrane and Water Treatment
    • /
    • 제11권3호
    • /
    • pp.179-187
    • /
    • 2020
  • Electrodialysis has been applied for treatment of industrial wastewater including metal electroplating. The wastewater from metal plating industries contains high concentrations of inorganics such as copper, nickel, and sodium. The ions in the feed were separated due to the electrical forces in the electrodialysis. The concentrate compartment is exposed to the elevated concentrations of the ions and yielded inorganic precipitations on the cation exchange membranes. The presence of organic matter in the metal plating wastewater affects complex interfacial reactions, which determines characteristics of inorganic scale fouling. The wastewater from a metal plating industry in practice was collected and the inorganic and organic compositions of the wastewater were analyzed. The performance of electrodialysis of the raw wastewater was evaluated and the effects of adjusting pH of the raw water were also measured. The integrated processes with neutralization and electrodialysis showed great removal of heavy metals sufficient to discharge to aquatic ecosystem. The organic matter in the raw water was also reduced by the neutralization, which might enhance removal performance and alleviate organic fouling in the integrated system.

물-시멘트비에 따른 시멘트계 재료의 pH 저하 저항성 평가 (Resistance to a pH Fall with Water-Cement Ratio in Cementitous Material)

  • 정민선;안기용;송하원
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
    • /
    • pp.325-326
    • /
    • 2009
  • 본 연구에서는 물-시멘트 비에 따른 시멘트계 재료인 시멘트 페이스트, 모르터 및 콘크리트의 pH 저하 저항성을 평가하였다. 우선 시멘트 페이스트에 대해 물-시멘트 비 30%, 40%, 50% 인 보통 포틀랜드 시멘트 페이스트의 산 증가에 따른 pH를 측정하였다. 또한, 페이스트의 pH 저하 저항성에 대한 골재의 영향에 대해 알아보기 위해서 콘크리트, 모르터, 페이스트의 pH 저하 저항성 측정 실험도 수행하였다. 실험결과, 산이 증가할수록 pH는 감소하였으며 특히 pH 10 정도에서 급격한 pH 저하가 발생되었다. 산 증가에 따른 pH 감소정도는 산중화능력으로 나타내었으며 시멘트 수화물에 의해 특정 pH에서 산중화능력이 물-시멘트비에 따라 높게 나타났다.

  • PDF

Coprinus congregatus에서 산성액체배지에서의 Laccase의 역할 (Role of Laccase in a Low pH Liquid Medium in Coprinus congregatus)

  • 김순자;임영은;최형태
    • 미생물학회지
    • /
    • 제33권1호
    • /
    • pp.27-30
    • /
    • 1997
  • Coprinus congregatus를 pH 4.2로 낮춘 YpSs 액체배지에 접종할 경우 세포막연관효소인 laccase가 배양 1일만에 상등액으로 대량 생성분비된다. 분비된 효소는 매우 빠르게 효소력의 감소를 보이며 전기영동상의 이동변화가 있다. 이와 같이 변화된 전기영동상을 보이는 효소단백질을 분광광도계로 분석할 경우 정제된 효소단백질과는 다른 분광 스펙트럼을 보인다.

  • PDF

ABS 수지의 무전해 Ni 도금 (Electroless Ni plating of ABS plastics)

  • 김기문;김민희;박종철;송태환;이종권;박지환
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2002년도 추계학술발표논문집
    • /
    • pp.243-245
    • /
    • 2002
  • ABS(Acrylonitrile Butadiene Styrene) 수지는 낮은 비중과 전기전도도, 가공성 등 우수한 물리적 성질을 갖는다. ABS 수지 제조방법인 Conventional process와 이를 개선한 MmSH(Momentary mold Surface Heating) injection process로 제조하여 나타나는 도금의 최적 조건을 연구하였다. 탈지, 에칭, Neutralization, Catalyzing, Accelerating의 전처리 과정을 거쳐 pH 변화에 따른 무전해 Ni 도금을 실시한 결과 각 수지 모두 pH7 이상에서 도금속도와 밀착력이 증가하였으나 MmSH injection process로 제작된 ABS 수지보다 Coventional process에서 제작된 ABS 수지의 밀착력이 우수한 경향이 나타났다.

라이시미터를 이용한 중화처리된 산성화경사지의 계절별 pH 용탈특성 평가 (The Assessment of pH Variation for Neutralized Acidic Areas using Lysimeters by Seasons)

  • 오승진;오민아;박찬오;정문호;이재영
    • 한국지반신소재학회논문집
    • /
    • 제14권4호
    • /
    • pp.79-86
    • /
    • 2015
  • 우리나라의 지형은 약 70% 이상이 산악지역으로 형성되어 있으며 평균 pH는 4 ~ 5로 산성화 정도가 심각한 수준이다. 현재 국내에는 약 1,000여개의 휴 폐광된 많은 금속광산이 오염 방지시설이나 처리시설이 갖춰지지 않은 채 중금속을 함유한 광미나 폐석이 장기간 환경 중에 노출되어 왔으며, 지속적인 관리 및 환경오염에 대한 모니터링이 미흡한 실정이다. 대부분의 휴 폐광산은 산림지역에 밀집하여 있어 경사지면으로 이루어진 곳이 많다. 경사지에서의 강우에 의한 토양유실은 작물의 생산성과 함께 수계의 부영양화 등에도 영향을 미치며 이로 인한 2차 오염원으로 발전할 수 있어 심각한 수준의 환경문제를 야기할 수 있다. 따라서 본 연구에서는 실제 산성화경사지와 유사한 조건의 라이시미터를 조성하고 과거 기 수행된 연구의 산출물인 폐자원을 활용한 중화제를 이용하여 중화처리를 실시한 후, 계절별 특성에 따라 인공강우를 살포하여 토양과 유출수의 pH 용탈에 따른 2차 환경오염 여부를 가늠하고 중화처리 후 식물식재 방안을 모색하고자 한다. 실험은 산성토양만을 충진한 대조군과 중화처리를 실시한 실험구 1, 중화처리 후 식물식재를 조성한 실험구 2로 구성하였다. 실험결과, 모든 계절에서 중화처리를 실시한 실험구 1, 2가 낮은 pH 용탈결과를 나타내었으며, 특히 실험구 2에서는 pH 용탈률이 가장 낮은 것으로 나타났다. 강우강도와 강우빈도 등 계절별 특성에 따른 pH 용탈은 큰 영향이 없는 것으로 나타났다.

pH Effects of Electroless Ni Plating on ABS Plastics

  • Song, T.H.;Lee, J.K.;Ryoo, K.K.;Lee, Y.B.
    • Corrosion Science and Technology
    • /
    • 제3권1호
    • /
    • pp.26-29
    • /
    • 2004
  • Metal plated plastics are becoming more prevalent in materials of communication parts. A new technique MmSH is a process of injecting plastics to produce innovated physical properties compared to the conventional injection process. This study involves two ways of coating plastics Ni by electroless plating and varying bath and plasma treatment for improved adhesion strength between plating layer and surface. MmSH injection processed ASS with plasma treated after neutralization showed a superior adhesion force and a gloss and rate of deposition when it was in pH 7.5. On the other hand, conventional injection processed ASS was in pH 6.5.

변형 폴리올 공정에서 pH에 따라 합성된 Sn 나노입자의 형상 변화 및 형성기구 (Morphology and Formation Mechanism of Sn Nanoparticles Synthesized by Modified Polyol Process at Various pH Values)

  • 신용무;이종현
    • 한국재료학회지
    • /
    • 제24권11호
    • /
    • pp.578-584
    • /
    • 2014
  • To synthesize Sn nanoparticles (NPs) less than 30 nm in diameter, a modified polyol process was conducted at room temperature using a reducing agent, and the effects of different pH values of the initial solutions on the morphology and size of the synthesized Sn NPs were analyzed. tin(II) 2-ethylhexanoate, diethylene glycol, sodium borohydride, polyvinyl pyrrolidone (PVP), and sodium hydroxide were used as a precursor, reaction medium, reducing agent, capping agent, and pH adjusting agent, respectively. It was found by transmission electron microscopy that the morphology of the synthesized Sn NPs varied according to the pH of the initial solution. Moreover, while the size decreased to 11.32 nm with an increase up to 11.66 of the pH value, the size increased rapidly to 39.25 nm with an increase to 12.69. The pH increase up to 11.66 dominantly promoted generation of electrons and increased the amount of initial nucleation in the solution, finally inducing the reduced-size of the Sn particles. However, the additional increase of pH dominantly induced a decrease of PVP by neutralization, which resulted in acceleration of the agglomeration by collisions between particles.

초미분말 석회석 현탁액을 이용한 전자산업 폐수 불소이온 제거연구 (Removal of Fluoride Ions from Electronic Industrial Wastewater Using Lime Stone Slurry)

  • 박현수;박연수;정구일;김재우;조영민
    • 공업화학
    • /
    • 제29권3호
    • /
    • pp.258-263
    • /
    • 2018
  • 본 연구에서는 전자산업폐수에 함유되어 있는 불소성분을 제거하기 위하여 미세 침강성 석회석을 적용해보고자 하였다. 석회석의 입자크기는 평균 $0.96{\mu}m$이었으며, 질량 기준으로 70%가 함유된 수용액상의 pH는 10이었다. 현탁액의 침강속도는 2 mL/hr로 나타났다. 본 연구의 시험용 석회석 수용액은 폐수 중화와 불소이온 제거능력 면에서 기존의 액상소석회와 동등 이상의 성능을 보여주었다. 추가적인 알칼리 증량제의 투입양에 따라 pH 7에 도달할 수 있는 시험용 칼슘원의 양은 기존의 석회수보다 적었다. 또한 불화수소로 고정시킬 수 있는 양도 미분말 석회석이 석회수보다 큰 것으로 나타났다. 또한, Minteq 평형모델링으로부터 다양한 불소와 칼슘화합물 형성이 예상되었다.

2009년 부산지역 강수의 화학적 특성 (Characterization of Chemical Properties of Precipitation at Busan, Korea, 2009)

  • 정운선;박성화;강덕두;이동인;김동철
    • 한국환경과학회지
    • /
    • 제23권1호
    • /
    • pp.69-79
    • /
    • 2014
  • The seasonal variation of pH and ion components in precipitation were investigated from January to December 2009 at Busan, Korea. The precipitation was acidic with a volume-weighted mean pH concentration of 5.32, which ranged from 3.79 to 8.66. The volume-weighted mean conductivity showed 86.77 ${\mu}S/cm$ and indicated higher concentration about 96.69 ${\mu}S/cm$ in summer. The volume-weighted mean equivalent concentration of components followed the order: $K^+$ > $Ca^{2+}$ > $nss-Ca^{2+}$ > $NH_4^+$ > $Mg^{2+}$ > $Na^+$ > $Li^+$ in cations and $Cl^-$ > $SO_4^{2-}$ > $nss-SO_4^{2-}$ > $NO_3^-$ > $NO^{2-}$ > $F^-$ > $Br^-$ in anions. Particularly, concentration of $K^+$ and $Cl^-$ showed 56 and 78 % in cations and anions. The higher concentration in $K^+$, $Na^+$, $Mg^{2+}$ and $Cl^-$ were shown in Busan city as compared to the other cities. The neutralization factors have been found to have higher value for potassium ion in winter compared with different seasons, indicating significant neutralization of acidic components over the region by potassium. Therefore, the precipitation characteristics at Busan had both continental and coastal as consequence of pH, conductivity and ionic analyses.