• Journal of the Korean Society of Food Science and Nutrition
• /
• 제31권3호
• /
• pp.423-427
• /
• 2002

Xanthan gum (XG) was investigated for use as a thickening and stabilizing agent in kimchi during fermentation at 10$\^{C}$. The mixing ratios of XG to salted Chinese cabbage were 0.1, 0.3 and 0.5%. Quality characteristics of kimchi such as pH, titratable acidity, reducing sugar content and microbial loads were measured. pH and reducing sugar content showed abrupt decreases after 5 day lag time until 20 days, while titratable acidity steadily increased during fermentation. The addition with 0.5% XG retarded the change rates of pH and titratable acidity showing the slowest change. Kimchi samples added with 0.1% and 0.3% XG maintained a higher reducing sugar content during the whole fermentation period of 30 days. Microbial loads showed an abrupt increase from 5 to 10 days, and maintained a nearly same load thereafter. Kimchi sample added with 0.3% XG showed better scores in color, aroma and taste.

• Journal of Korea Foresty Energy
• /
• 제25권2호
• /
• pp.55-63
• /
• 2006

Physicochemical properties and copper (II) adsorption ability of two oakwood and two pinewood charcoals, which were manufactured in traditional mode and commercialized in Korea, were examined pHs of these four wood charcoals were between 9.5 and 9.8. In the elemental contents of the wood charcoal, the contents of carbon atom (C) in the four samples were between 85-90%, while the content of hydrogen atom (H) in pinewood charcoal of the company 'S' was 1.62% and this value was three time higher than those of other samples. For iodine adsorption and specific surface area, the pinewood charcoal sample showed higher values than those of the oakwood charcoals. In the copper (II) ion adsorption in aqueous solution, the adsorption rate was increased by the increase of treated amounts of charcoal, treatment time, and pH.

• Journal of the Mineralogical Society of Korea
• /
• 제22권1호
• /
• pp.35-47
• /
• 2009

The deteriorations of stone monuments located in Gyeongju area are predicted in a modeling study. Artificial rain and accelerated weathering test are here applied to the Gyeongju Namsan granite and cement mortar. They are reacted with pH 4.0, pH 8.0 and pH 5.6 rain, respectively. The two former values are the limited acidity values in the Gyeongju (the acidity of rain of the Gyeongju were pH $4.93{\sim}6.39$ in 2005) and the latter is the limited acidity of acid rain. The rains of pH 5.6 and pH 8.0 reach close to a value of pH 7.0 after the reaction with the Gyeongju Namsan granite. After application of the artificial rain and weathering test, the weight of specimens were reduced and the contents of soluble ions in the specimens were increased. These results are attributable to solution of minerals in the specimens. At first, the microlithic have dissolved in ground from the reaction with acid rain. And then mainly quartz, plagioclase and orthoclase bound by the microlithic are disintegrated. The cement mortars are dissolved after the reaction with not only acid but alkali rain. The concentrations of ions in the dissolved cement mortar are higher than those in granite.

• Korean Journal of Clinical Laboratory Science
• /
• 제56권2호
• /
• pp.171-180
• /
• 2024

The endotoxin test is based on the reaction between Limulus Amebocyte Lysate (LAL) and the lipopolysaccharides of Gram-negative bacteria. In this study, we sought to identify factors that interfere with the LAL testing of radiopharmaceuticals and evaluated acceptable ranges. A gel-clot LAL test and a chromogenic LAL test were used as endotoxin tests. We compared the performances of the Endosafe^Ⓡ LAL and recombinant Endosafe^Ⓡ Recombinant Cascade Reagent (rCR) cartridges for the chromogenic test. The factors that interfered with ⁶⁸Ga-DOTATOC injection were pH, 4-(2-hydroxyethyl) piperazine-1-ethanesulfonic acid (HEPES) buffer, and organic solvents, especially ethanol. However, interference by these factors was overcome by diluting the ⁶⁸Ga-DOTATOC injection tenfold. In addition, no interference was observed at pH values between 4 and 8, at a HEPES concentration of 2,000 ㎍/mL, or an ethanol concentration of <1%. Furthermore, results showed that interfering factors had similar effects on the performances of the Endosafe^Ⓡ LAL and Endosafe^Ⓡ rCR cartridges. The results of this study are expected to be useful for evaluating factors that interfere with the endotoxin testing of new radiopharmaceuticals.

• Journal of Korean Society of Forest Science
• /
• 제86권3호
• /
• pp.342-351
• /
• 1997

The objective of this study was to compare acid-neutralizing and buffering capacity of four tree species against soil acidification by acid rain. About 30-year-old forests composed of Pinus rigida, Alnus hirsuta, Quercus mongolica, and Liriodendron tulipifera in a provincial experimental forest located 15km east from Banwol Industrial Complex in Kyonggido were used in this study. Incident precipitation, throughfall and stemflow, and soil samples were collected from May to September, 1996 to analyze their pH and canon concentrations. Internal leaf pH, external acid neutralizing capacity(ENC), and buffering capacity index(BCI) of leaves were also determined. The incident precipitation showed an average pH of 4.56, with the percentage of acid rain incidents being 74%. The average soil pH of the study area was 4.15. The pH of throughfall and stemflow in all four species was higher than that of precipitation except that of the stemflow of Pinus rigida which showed a pH of 3.73. The throughfall of Liriodendron tulipifera showed the highest pH of 5.38. The pH of throughfall and stemflow showed a positive correlation and no correlation, respectively, with precipitations. The most abundant cation in precipitation was Ca. The canon concentraions in throughfall and stemflow decreased in the following order of K, Na, Ca, and Mg. Cation concentrations in stemflow were highest in Lirioendron tulipifera and lowest in Pines rigida. Nutrient leaching from above ground increased with decreasing pH of precipitation. The pH of stemflow showed a positive correlation with ENC and BCI. The highest values in ENC, BCI, soil pH, and soil cation concentrations were observed in Liriodendron tulipifera, while the lowest values were obtained in Pinus rigida, It was concluded that Liriodendron tulipifera had highest neutralizing capacity against acid rain, while Pinus rigida had the lowest capacity and even promoted acidification of soil.

• Microbiology and Biotechnology Letters
• /
• 제26권3호
• /
• pp.221-225
• /
• 1998

Fourteen healthy volunteers ranged in ages from 20 to 30 were served to administrate two types of yoghurt (2 bottles/day) such as one added uncapsulated-Bifidobacteria (Y-UCB) and the other added capsulated-Bifdobacteria (Y-CB) for 4 weeks, and the changes of intestinal microflora and fecal properties were studied. After administration of Y-UCB, the viable cell counts of fecal Bifidobacteria (p<0.01) and Lactobacilli (p<0.05) were significantly increased, however, fecal pH, moisture content and tile viable cell counts of coliform bacteria in feces were not changed when they were compared to those before administration (control). After administration of Y-CB, the viable cell counts of Bifidobacteria were significantly increased (p<0.01) and viable cell counts of coliform bacteria were significantly decreased (p<0.05), however, fecal pH, moisture content, and viable cell counts of Lactobacilli were not changed when they were compared to those before administration. High level of fecal Bifidobacteria and low pH were maintained after 2 weeks from ceasing the administration of both types of yoghurt when they were compared to those before administration. In conclusion, there were not significant differences between two types, Y-CB and Y-UCB in the changes of fecal pH, moisture content, and the viable cell counts of Bifidobacteria, Lactobacilli, coliform bacteria after the administration.

• Culinary science and hospitality research
• /
• 제16권4호
• /
• pp.305-311
• /
• 2010

This study was carried out to investigate the availability of sorbitol and maltitol as alternative sweeteners for replacement of sucrose in sponge cake. Physical characteristics of batter such as specific gravity, pH of cake batter and volume, texture of sponge cake were analyzed lst specific gravities of batters contained 10~40% of sorbitol and maltitol were lower than that of the sucrose. 2nd specific gravity of batters showed the same results as the lst specific gravity. pH of the cake batters contained sorbitol and maltitol revealed high value compared to the control. As the amount of replacement increased, pH value showed higher. In terms of cake volume, as the amounts of sorbitol and maltitol were increased, the volume was larger than that of the control. Up to 20% of replacement, the cake contained sorbitol showed higher volume than that containing maltitol, but the cake contained maltitol showed higher volume in above 30% In terms of texture of sponge cake, the control showed the highest in hardness, as the amounts of sorbitol and maltitol were increased, hardness value has lowered compared to the control on the same storage day. In this study, addition of sorbitol and maltitol to sponge cake showed good results.

• Applied Chemistry for Engineering
• /
• 제30권3호
• /
• pp.352-357
• /
• 2019

In this study, a reactive emulsifier with vinyl groups was synthesized by using 3-butenoic acid and polyoxyethylene(20) stearyl ether. The synthesized reactive emulsifier was confirmed by FT-IR and $^1H-NMR$. In addition, the reactive emulsifier synthesized in the preparation of aqueous acrylic pressure sensitive adhesives was used and the properties of the respective pressure sensitive adhesives were compared to those of using commonly used nonionic emulsifiers. The solid content was measured in the range of 56.8~57.4%. In the case of the initial adhesion, the S20BA made with a reactive emulsifier was measured as $^{\sharp}13$. Peel strengths of the prepared adhesives were measured in the range of $0.66{\sim}1.05kg_f$ and the highest peel strength was observed for S20BA. As a result of the heat resistance test, S20BA showed the highest as $840^{\circ}C$. In order to evaluate the applicability of adhesives for skin, the pH value was measured as 7, neutral and also it was found to be non-irritation from primary skin irritation test results.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• 제42권4호
• /
• pp.413-420
• /
• 2016

Hydroxy acid has been used to enhance anti-aging and skin moisturization by peeling effect on the skin stratum corneum, and thus it has been widely used in topical products and cosmetic products. Among them, the effect that appears most effectively in a short period of time has been reported to be effected by the pH of the cosmetic formulations. However, there are many difficulties in use due to irritation caused by pH and concerns about side effects. The purpose of this study was to evaluate the effect of applying cosmetics with (1) varying concentrations, (2) types and (3) pH of hydroxy acid on human skin. 22 healthy adults were stained with DHA (dihydroxyacetone) and DC (dansyl chloride) on the forearm, and the skin exfoliation effect was measured after application of the test products. (1) The application of GA (glycolic acid) increased the desquamation by concentration dependent. (2) the test product prepared with neutral pH showed no exfoliation effect. In contrast, SA (salicylic acid) showed a statistically significant exfoliation effect at both acidic pH and neutral pH. (3) The neutral pH SA showed excellent exfoliation effect on bot DHA and DC stained stratum corneum. These results suggest that it is possible to manufacture safe cosmetics without damaging the skin barrier, providing an opportunity to use cosmetics that are expected to exfoliate to people, whose skin is sensitive to pH.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.54-56
• /
• 2002

본 논문에서는 뇌압을 측정하기 위해 LC 공진을 이용한 압력센서를 제작하고 그 성능을 시험하였다. 원격 측정용 압력센서는 움직이는 전극역할을 하는 p+ 박막이 있는 실리콘 기판과 고정된 평면 코일이 있는 유리 기판으로 구성되어 있다. 압력에 따라 두 전극 간의 간격이 달라지고 이에 따른 캐피시턴스가 변화하여 공진주파수가 변화하게 된다. 원격 측정용 외부 안테나를 이용하여 측정회로의 공진 주파수에서 위상의 변화를 측정하여 압력을 측정한다. 상부기판은 실리콘 기판을 도핑하여 p+ 막을 형성하고 금속막을 증착하여 전극을 형성한 후 실리콘을 식각하여 완성하고. 하부기판은 유리 기판 위에 금속막을 증착한 후. 전기도금으로 평면 코일을 형성하고 다시 금속막을 증착하여 전극을 형성하여 제작한다. 압력을 변화시킬 때 전극간의 간격의 변화에 따른 공진주파수에서의 위상의 변화를 외부 안테나에 연결된 측정회로를 통해 측정한다. 측정결과 공진주파수인 160 Mhz에서 -0.08 $deg/mmH_2O$의 감도를 얻을 수 있었다.