• Clean Technology
• /
• v.7 no.4
• /
• pp.251-263
• /
• 2001

This study was conducted to provide a basic information for recovery plan of Seung-Gi Stream which is a major stream of Incheon metropolitan area. Source and characteristics of pollutants were analyzed and studied. Samples were taken 10 rounds in 5 sections in Seung-Gi stream. Annual pollutants loads and sectional characteristics of pollutants loads were investigated regarding flow rate, pH, DO, SS, $BOD_5$, $COD_{Cr}$, T-P, TKN and concentrations of Zn, Cd, Cu, Cr atoms which enter into Seung-Gi stream during rainy and dry season respectively. As one came close to the Nam-Dong Industrial Complex, sectional discharge loads were heavy and water quality was failed to meet the standard by "Environmental Standard of River Quality". As a result, heavy load of pollutants in Seung-Gi stream was considered to influence negatively the sea water quality of Incheon. Solution plans to solve problems are as follows. First, circulation of treated water at Seung-Gi WWTP(Wastewater Treatment Plant) and retreated water by URC(ultra rapid coagulation) process treat with that. Second, sewage and wastewater is gathered, make it disposed. After then, we circulate treated water. If solution plans be applied, we can predict water quality. Then we could grope for how make to recovery role of Seung-Gi stream as stream.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.3
• /
• pp.112-117
• /
• 2017

Ion exchange fiber, PADD was synthesized by the reaction between PAN based acrylic fiber and DETA with $AlCl_3{\cdot}6H_2O$, and was analyzed by FT-IR and SEM to investigate its characteristics. The experimental results of Cr(VI) removal by PADD were better fitted with Langmuir adsorption isotherm, and the maximum uptake value ($Q_{max}$) was calculated to be 6.93 mmol/g. The kinetic data can be well described by Lagergen pseudo-second order rate model. The Cr(VI) adsorption capacity of PADD was 4.11 mmol/g at pH 2, which shows the effect of pH changes on the removal of Cr(VI). The adsorption selectivity of Cr(VI) was higher than phosphate and As(V). Total ion exchange capacity of PADD was 4.70 mmol/g, which was measured by acid-base back titration.

• Journal of the East Asian Society of Dietary Life
• /
• v.11 no.4
• /
• pp.289-294
• /
• 2001

Yields of shells, appearance of the shellfishes, mineral contents of the shells and their hot water extracts were determined in six shellfishes such as corb shell(CS). short neck clam(SNC). taste clam(TC), ark shell(AS). top shell(TS) and oyster(OY) from the western coast of Korea. Yields of shells in shellfishes were 70.I~80.5% but yields of TC was the lowest as 40.7%. The highest among weight of the shell the shellfishes was the TS(26.2g) and the lowest weight was TC(5.6g) Colors of CS, SNC, TC. AS. TS and OY were yellowish brown, brown, black. greenish brown and gray. respectively. Ca content of the shell of shellfishes was 36.23~38.78% and the content of K and Na were 0.23~4.54% and 1.48~l.59%, respectively. Contents of Na, Mg, Fe. Mn, Zn, Cu. P and S were in the range of 0.01~0.21%. It also contained heavy metals, such as Pb(1.90~7.75 ppm), Cd(0.5~4.50 ppm), As (1.40~4.30 ppm), Se (0.2~l.50 ppm). Cr(1.00~8.30 ppm) and Hg(0.002~8.2 ppm), Ca content in hot water extracts of shell of shellfish was the highest in TC(2,448 mg/100 g), and the lowest in SNC(115 mg/100 g). K content in TC extracts was the highest with the levels of 952 mg/100 g. P content of TC and SNC were 201 and 0.36 mg/100 g, respectively. The contents of Pb, As, Se and Cr were the highest in the extracts of TC and were 110. 40. 90, 20 $\mu$g/100 g, respectively. But Cd was not detected in the extracts of SNC.

• Journal of Korean Medicine Rehabilitation
• /
• v.28 no.3
• /
• pp.13-25
• /
• 2018

Objectives We investigated anti-obesity effects of essential oils extracted from Cnidii Rhizoma (CR) in immature adipocytes to magnify it's clinical therapeutic usage. Methods Essential oil of CR was extracted with ethyl acetate or petroleum ether and through steam distillation, respectively. Oil red-O staining for monitoring its inhibition effect on adipogenesis and differentiation in murine 3T3-L1 adipocytes and 3-(4,5-methylthiazol-2-yl)-2,5-diphenyletetra zolium bromide (MTT) assay for cell safety were done. Also phospho-adenosine monophosphate (AMP)-activted protein kinase (P-AMPK), AMP-activated protein kinase, phospho-acetyl-CoA carboxylase (P-ACC), acetyl-CoA carboxylase, peroxisome proliferator-activated receptor-${\alpha}$ (PPAR-${\alpha}$), peroxisome proliferator-activated receptor-${\gamma}$ (PPAR-${\gamma}$) and CCAAT/enhancer binding protein ${\alpha}$ (C/EBP-${\alpha}$) expressions as obesity-related factors were measured by western blot analysis. Results Protein expressions of P-AMPK, P-ACC and PPAR-${\alpha}$ were increased in essential oils-treated adipocytes compared to those of control group, respectively. Furthermore, protein expressions of PPAR-${\gamma}$ and C/EBP-${\alpha}$ were decreased in essential oils-treated adipocytes compared to those of control group, respectively. Conclusions These results demonstrate that essential oils of CR inhibit adipogenesis and differentiation. Also they promote the oxidation of fatty acids in adipocytes. Thus, results suggest that essential oils of CR could be used as a valuable material for anti-obesity therapeutics via control of lipid metabolism.

• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.123-133
• /
• 1998

The effectiveness of TiN ion-plating was examined with TiN ion-plated Co-Cr wires(.016“, .016”x.022“) on three different types of bracket(TiN ion-plated metal bracket ceramic bracket and plastic bracket). Maximum static frictional forces and characteristic curves obtained from the frictional characteristic graph, were compared and surface roughness of wires and bracket slots before and after friction experiment was observed by SEM. The obtained results were as follows $\cdot$The frictional forces of TiN ion-plated wires were significantly lower than those of non ion-plated wires(p<0.05). $\cdot$On the effect of wire shape, the frictional forces of round wires were significantly lower than those of rectangular wires(p<0.05) $\cdot$As the result of the SEM observation on the wires and bracket slots after the friction experiment the surface of non ion-plated wires was rougher than that of TiN ion-plated ones. $\cdot$The difference between the static frictional forces and the kinetic frictional forces was not significant in case of the TiN ion-plated round ins, but the static frictional forces were a little higher than the kinetic frictional forces in the TiN ion-plated rectangular wires. $\cdot$The static frictional forces were much higher than the kinetic frictional forces in the case of non ion-plated wires.

• Analytical Science and Technology
• /
• v.12 no.2
• /
• pp.141-150
• /
• 1999

Twenty organic chemical substances, tetrachloroethylene, toluene, ethylbenzene, p-xylene, m-xylene, isopropyl benzene, stylene, bromobenzene, 1,3,5-trimethylbenzene, 2-chlorotoluene 1,2,4-trimethylbenzene, p-isopropyltoluene, 4-chlorotoluene, n-butylbenzene, 1,2,4-trichlorobenzene, naphthalene, tert-butylbenzene, sec-butylbenzene, phenol, isopropyl benzene hydroperoxide were isolated from untreated and treated wastewater collected at 76 companys of 9 types industry in the basin of Young San River. Their organic compounds were elucidated by Gas Chromatography/Mass Spectrometry (GC/MS) and by comparison with each standard reagents. Especially, phenol compound is detected from effluent water but not detected from plant wastewater in the chemical industry. Heavy metal, which are Cr, Mn, Cu, Zn, Cd, Pb, As, Al and Fe, are contained in the plant wastewater of all industry, Fe, Al of them is more detected than the other metals in plant wastewater. Cr, Cd, Pb, As is contained much in plant wastewater of electricity and electron, metal molding industry. Nine metals is nearely treated when plant wastewater is treated, and then the concentration of each other metals is detected below water quality standard or not detected by using AA.

• Economic and Environmental Geology
• /
• v.43 no.4
• /
• pp.315-332
• /
• 2010

All of the water and stone-dust samples with or without flocculant, in and around quarry mines, were analyzed for total concentrations of heavy metals, cyanide(CN), toxic organic compounds and organic phosphorus. Extraction experiments on stone-dust by EDTA and various pH solutions were also carried out, in order to evaluate the contaminant leaching from the long-term heaped stone-dust within quarry mines. The concentrations of $Cr^{6+}$, Hg, CN, TCE/PCE and total phosphorus in all samples (water and stone-dust) were under detection limits, confirming no environmental contamination from stone-dust in quarry mine areas. Lead and cadmium were not detected in all water samples. Copper and zinc were found in some water samples, and arsenic was detected in a few water samples. But they also showed levels much lower than the drinking water standard. Results of the extraction experiments by EDTA and pH solutions showed that Pb, Cr, Cd, Cu and Zn were leached out in less amounts or under detection limits. Arsenic was detected only at pH 3. From above results, we suggested that environmental contamination by quarry mine development is likely to be minor or negligible.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.6
• /
• pp.61-68
• /
• 2009

The main objective of this study was to examine the removal of heavy metals from water by inflated vermiculites. The component of vermiculites was analyzed by XRF, and the concentration of metal ion was measured by ICP-AES. Serial batch kinetic tests and batch sorption tests were conducted to determine the removal characteristics for heavy metals in aqueous solutions. As a result, solution pH values of tests with the inflated vermiculites generally increased and then stabilized. Equilibrium pHs were generally established within 5 hrs. In addition, removal rates of inflated vermiculites were tested at the initial concentration of 3 mg/L. As a result, at equilibrium concentration, except for chromium (36.23%), Most of the heavy metals were effectively removed (96.08~98.54%). Finally, sorption data were correlated with both Langmuir and Freundlich isotherms. The Qmax obtained from Langmuir isotherm were determined to Pb $725.4mg\;kg^{-1}$, Cd $568.8mg\;kg^{-1}$, Zn $540.2mg\;kg^{-1}$, Cu $457.2mg\;kg^{-1}$ Cr $0.9mg\;kg^{-1}$ respectively. The results of the study indicate that inflated vermiculites can be properly used as an adsorbent for various heavy metals because of its outstanding removal rate.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.5
• /
• pp.933-941
• /
• 2008

An extracellular $\beta$-glucosidase produced by Monascus purpureus NRRL1992 in submerged cultivation was purified by acetone precipitation, gel filtration, and hydrophobic interaction chromatography, resulting in a purification factor of 92-fold. A $2^2$ central-composite design (CCD) was performed to find the best temperature and pH conditions for enzyme activity. Maximum activity was observed in a wide range of temperature and pH values, with optimal conditions set at $50^{\circ}C$ and pH 5.5. The $\beta$-glucosidase showed moderate thermostability, was inhibited by $HgCl_2$, $K_2Cr_O_4$, and $K_2Cr_2O_7$, whereas other reagents including $\beta$-mercaptoethanol, SDS, and EDTA showed no effect. Activity was slightly stimulated by low concentrations of ethanol and methanol. Hydrolysis of p-nitrophenyl-$\beta$-D-glucopyranoside (pNPG), cellobiose, salicin, n-octyl-$\beta$-D-glucopyranoside, and maltose indicates that the $\beta$-glucosidase has broad substrate specificity. Apparently, glucosyl residues were removed from the nonreducing end of p-nitrophenyl-$\beta$-D-cellobiose. $\beta$-Glucosidase affinity and hydrolytic efficiency were higher for pNPG, followed by maltose and cellobiose. Glucose and cellobiose competitively inhibited pNPG hydrolysis.

• Journal of Environmental Science International
• /
• v.6 no.5
• /
• pp.521-529
• /
• 1997

In the study, we Investigated the behavior and removal efficiency of organics, nitrogen. phosphorus with operating conditions in SBRs. Substrate used was synthetic wastewater in which the ratio of $COD_{cr}$. : N : P was 100 : 12 : 2. The cycling the in SBRs was adjusted at 6 hours and 8 hours, and then certainly Included anaerobic and aerobic conditions. Also, for each cycling time. we performed 2 series of experiment simultaneously which was set up 10 days and 20 days as SRT. The removal efficiency of $COD_{cr}$. was over 97% in all operating conditions. In the 6 hours cycling time, the removal efficiency of $PO_4^{3-}-P$ reached almost 100% in steady state. And then we could observe a typical phonemena of phosphorus release and uptake, and the removal efficiency of N was 67%, Residual N source was almost TKN and most of the rest remained as $NO_2-N$. Also the difference in both SRTs was not observed practically. In the 8 hours cycling time, dissolution of sludge appeared. and, $PO_4^{3-}-P was not nearly removed but nitrogen was removed up to 75%, And the residual nitrogen was accumulated as $NO_2^--N$.