• Journal of Korean Biological Nursing Science
• /
• v.4 no.2
• /
• pp.59-68
• /
• 2002

The purpose of this study was to determine the effect of exercise program on natural killer cell cytotoxic activity(NKCA) in breast cancer patients who had been radiation therapy after surgery. The subjects in the experimental group consisted of 11 breast cancer patients, while the subjects in the control group consisted of 15. Subjects in the experimental group participated in exercise program for 8 weeks. Exercise program consisted of shoulder stretching, arm weight training and treadmill walking exercise. They started to exercise on treadmill for 20 minutes per day, 3 times a week at 40% of maximum heart rate, and increased intensity and duration of exercise so that they were running 30 minutes/day at 60% of maximum heart rate from the 3rd week to the 8th week. Natural killer cell cytotoxic activity were determined before and after the exercise program. For measuring the natural killer cell cytotoxic activity, 8ml to 10ml blood was collected from the subjects. Mononuclear cell was isolated by centrifuge of the blood and cultured by putting $Cr^{51}$, and reacted with target cell, K562 cell. Baseline demographic and medical data were compared between groups with the Fisher's exact test and Mann-Whitney U test. For effects of the exercise program, repeated measures ANOVA was used. The result was as follows; Natural killer cell cytotoxic activity(NKCA) in experimental group comparing with control group significantly increased after the exercise program in case of effector cell : target cell ratio is 100 : 1(p<0.05). The above result suggest that the exercise program for breast cancer patients undergoing radiation therapy after breast surgery may increase the natural killer cell cytotoxic activity.

• The Korean Journal of Community Living Science
• /
• v.18 no.3
• /
• pp.391-398
• /
• 2007

Ginkgo leaves, which have been known as medical materials, were selected as new natural dyes in this study, in which it was examined whether they have the function of UV-blocker or not. Cotton, linen & Hanji(Korean traditional paper) were dyed with Ginkgo. Al, Cr, Cu, Fe and Sn were selected as mordants. UV-blocking rate of dyed samples was measured after dyeing and mordant treatment. The results of this study are as follows. First, most surface color of dyed samples was yellow except that Hanji mordanted with Cu was yellowish red. Second, dyeing repetition had positive correlations with K/S values of cotton ($r=.\;758^{**}$), linen ($r=.\;500^*$) and Hanji ($r=.\;819^{**}$), because K/S values were increased according to dyeing repetition. Third, solar UV-blocking rates had positive correlations with dyeing repetitions (p<0.01), because UV-blocking rates had increased according to dyeing repetition. Fourth, UV-blocking ability of Hanji was highest among samples, as UV-blocking rates of cotton and linen dyed after 3 dyeing repetition were up to 93%, Hanji's values were up to 98%. Therefore, it was proven that Ginkgo extracts used in this experiment as dyestuff have excellent dyeing ability and high UV-blocking ability. It is hoped that this work will lead to further research to confirm the physiological effects when human wear the clothes made from Hanji.

• Journal of the Korean Society of Tobacco Science
• /
• v.20 no.1
• /
• pp.5-12
• /
• 1998

Pot experiment was conducted to investigate the effects of fly ash on growth responses and on accumulation of the heavy metals in soil. Two kinds of fly ash, anthracite and bituminous coal, were treated with different levels of 0, 0.4, 0.8, and 1.2 kg/pot(20L). Tobacco growth was better by application of fly ash than that by the control. However, the early stage of growth by application of bituminous coal, 1.2 kg/pot, was decreased due to the boron toxicity occurred by fly ash. Generally, tobacco yield was significantly increased with applying fly ash, showing the highest yield at 1.2 kg/pot for anthracite and at 0.8 kg/pot for bituminous coal. The content of total nitrogen in leaves was higher with fly ash than that of the control, while the content of calcium in leaves was low, Contents of heavy metal and the other minerals were not significantly different between the control and the treatment of fly ash. Soil pH after experiment was linearly increased with application level of fly ash, indicating that the application of bituminous coal was more effective than that of anthracite. Contents of available phosphate, exchangeable $Ca^{2+}$+ and $Mg^{2+}$ in soil were increased by application of fly ash, especially with bituminous coal. Contents of Cu, Cr, and Ni were increased with application level of bituminous coati even if the contents were still lower than critical levels for farming land. The other heavy metals were similar between the control and the application of fly ash.

• Journal of Korean Society on Water Environment
• /
• v.18 no.4
• /
• pp.371-377
• /
• 2002

The purpose of this study is to develop effective operating process in order to achieve more suitable conditions of Anoxic-Oxic-Anoxic-Stripper(AOAS) SBR through real-time control. To improve the removal efficiency, glucose, methanol and synthetic food waste acid fermentant were added as an external carbon source, In the case of glucose and synthetic food waste acid fermentant, TN, TP were removed to average 86.9%, 73.0% respectively. Methanol was removed to average 64.6%, 55.4% respectively. The synthetic food waste acid fermentant proved to be the most efficient and allowed for the substitution of an external carbon source. The removal rate of $COD_{Cr}$, was approximately 90% at all cases. The results of the study that a correlation between ORP (Oxidation-Reduction Potential), pH and DO and nitrification or denitrification when an external carbon source is added and when it isn't was showed that ${\Delta}ORP$ is suitable parameter. ORP reacted properly to denitrification (${\Delta}ORP<-10$) and nitrification (${\Delta}ORP<0$). The use of real-time control saved anywhere between 61 and 67 minutes at the anoxic(1) stage and 26 to 52 minutes at the oxic(1) stage. When the time saved from the anoxic(1) and oxic(1) was added to the anoxic(2) stage for the removal efficiency of TN and TP increased from 0.7 to 13.9% and 12 to 35 % respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.524-530
• /
• 2016

Agricultural soils near or around industrial complexes can contain a certain amount of heavy metals that readily enter the food chain and negatively affect human health. Therefore, we conducted the study to investigate the distribution of selected heavy metals, including arsenic (As), cadmium (Cd), chromium (Cr), nickel (Ni), lead (Pb), mercury (Hg), and zinc (Zn), in farm-land soils around fifteen industrial complexes in the southwestern provinces, Korea. The concentrations of heavy metals in the soil samples were determined by the pseudo-total aqua regia (3 HCl : $1HNO_3$) digestion procedure. The heavy metal concentrations in most soils examined did not exceed the levels of Soil Contamination Warning Standard (SCWS) for agricultural lands (Region 1) presented in Soil Environment Conservation Law (SECL) established by Ministry of Environment (MOE), Korea. However, only one sampling site showed higher As amount ($27.1mg\;kg^{-1}$) than the SCWS level of As ($25mg\;kg^{-1}$). Pollution index (PI) for heavy metals did not exceed 1.0. The PI values were significantly positively correlated (p < 0.01) with the heavy metal concentrations. In particular, the values of correlation coefficient between the Cd and Pb concentrations and the PI values were higher than those estimated from other combinations, and thus the amounts of Cd and Pb in the agricultural soils highly affected the PI values for the heavy metals.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.4
• /
• pp.339-346
• /
• 2015

The synthesis of Fischer-Tropsch (FT) oil is the catalytic hydrogenation of CO to give a range of products, which can be used for the production of high-quality diesel fuel, gasoline and linear chemicals. This studied catalyst was prepared Cobalt-supported alumina and silica by the incipient wet impregnation of the nitrates of cobalt, promoter and organic solvent with supports. Cobalt catalysts were calcined at $350^{\circ}C$ before being loaded into the FT reactors. After the reduction of catalyst has been carried out under $450^{\circ}C$ for 24h, FT reaction of the catalyst has been carried out at GHSV of 4,000/hr under $200^{\circ}C$ and 20atm. From these experimental results, we have obtained the results as following; In case of $SiO_2$ catalysts, the activity of 12wt% $Cobalt-SiO_2$ synthesized by organic solvent was about 2 or 3 times higher than the activity of 12wt% $Cobalt-SiO_2$ catalyst synthesized without organic solvent. In particular, the activity of the $Cobalt-SiO_2$ catalyst prepared in the presence of an organic solvent P was two to three times higher than that of the $Cobalt-SiO_2$ catalyst prepared without the organic solvent. Effect of Cr and Cu metal as a promoter was found little. 200 h long-term activity test was performed with a $Co/SiO_2$ catalyst prepared in the presence of an organic solvent of Glyoxal solution.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.4
• /
• pp.253-258
• /
• 2014

PURPOSE. To compare marginal and internal gaps of zirconia substructure of single crowns with those of three-unit fixed dental prostheses. MATERIALS AND METHODS. Standardized Co-Cr alloy simulated second premolar and second molar abutments were fabricated and subsequently duplicated into type-III dental stone for working casts. After that, all zirconia substructures were made using $Lava^{TM}$ system. Marginal and internal gaps were measured in 2 planes (mesial-distal plane and buccal-palatal plane) at 5 locations: marginal opening (MO), chamfer area (CA), axial wall (AW), cusp tip (CT) and mid-occlusal (OA) using Replica technique. RESULTS. There were significant differences between gaps at all locations. The $mean{\pm}SD$ of marginal gap in premolar was $43.6{\pm}0.4{\mu}m$ and $46.5{\pm}0.5{\mu}m$ for single crown and 3-unit bridge substructure respectively. For molar substructure the $mean{\pm}SD$ of marginal gap was $48.5{\pm}0.4{\mu}m$ and $52.6{\pm}0.4{\mu}m$ for single crown and 3-unit bridge respectively. The largest gaps were found at the occlusal area, which was $150.5{\pm}0.5{\mu}m$ and $154.5{\pm}0.4{\mu}m$ for single and 3-unit bridge premolar substructures respectively and $146.5{\pm}0.4{\mu}m$ and $211.5{\pm}0.4{\mu}m$ for single and 3-unit bridge molar substructure respectively. CONCLUSION. Independent-samples t-test showed significant differences of gap in zirconia substructure between single crowns and three-unit bridge (P<.001). Therefore, the span length has the effect on the fit of zirconia substructure that is fabricated using CAD/CAM technique especially at the occlusal area.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.20
• /
• pp.8793-8796
• /
• 2014

Objective: To explore the influence of serum vascular endothelial growth factor (VEGF) level on therapeutic outcome and diagnosis/prognostic value in patients with cervical cancer. Materials and Methods: A total of 37 patients diagnosed with cervical cancer by biopsy were selected and treated with concurrent chemoradiotherapy. Double-antibody sandwich enzyme-linked immunosorbent assay (ELISA) was adopted before treatment to assess VEGF levels, and its relationships with clinicopathological features and short-term therapeutic effects were analyzed. Results: The median VEGF level in 37 patients before treatment was 647.15 (393.35~1125.16) pg/mL. Serum VEGF levels in patients aged <50 years, in International Federation of Gynecology and Obstetrics (FIGO) stage IIIa~IVa, with lymph node metastasis and tumor size >4 cm were significantly increased (P<0.05). The complete remission (CR) rate was 48.7% (18/37), partial remission (PR) rate was 35.1% (13/37), stable disease (SD) rate was 13.5% (5/37) and progressive disease (PD) rate was 2.70% (1/37), so the objective remission rate (ORR) after treatment was 83.8% (31/37). Logistic regression analysis showed that tumor size and serum VEGF level before treatment were independent risk factors affecting the therapeutic outcome, and the higher the level of serum VEGF, the worse the prognosis when tumor size>4 cm. Some 56.8% of patients manifested with myelosuppression, 37.8% with leucopenia, 24.3% with thrombocytopenia, 5.41% with diarrhea, 46.0% with nausea and vomiting, 21.6% with hair loss and 8.11% with hepatic and renal injury during the treatment. Conclusions: Serum VEGF level may reflect the degree of malignancy of cervical cancer and predict therapeutic effect, which is of great importance to cancer diagnosis and prognosis.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.3
• /
• pp.1277-1280
• /
• 2015

Aim: To report epidemiologic and anatomoclinical transitions of inflammatory breast cancer (IBC) in Tunisia. Materials and Methods: Data including clinico-pathological data for 208 cases of T4d or PEV 3 non-metastatic breast cancer diagnosed between 2005 and 2010 were collected from patient records. Chi2 and Z tests were used to compare variables with two Tunisian historical series and a series about Arab-American patients. Results: Thirty three percent of our patients had their first child before 23 years of age and 56% had their menarche before 12 years, 75% never receiving oral contraception. Obesity was observed in 42% of women and IBC occurred during pregnancy in 13% of cases. Tumor grade was II-III in 90% of cases, HR was negative in 52%, HER2 was over expressed in 31% and invasion of more than 3 axillary nodes occurred in 18% of patients. We observed a pCR rate of 19% after neoadjuvant treatment (anthracyline-taxane used in 79%, trastuzumab in 27% ). Compared to historical Tunisian series (since 1996), IBC epidemiology remained stable in terms of median age, menopausal status and obesity. However we observed a significant decrease in median clinical tumor size and number of positive axillary lymph nodes. Comparison to IBC in Arab-Americans showed a significant difference in terms of median age, menopausal status, positivity of hormonal receptors and educational level. Conclusions: Our assessment of epidemiologic transition showed a reduction of clinco-pathological stage of IBC, keeping the same characteristics as compared to Tunisian historical series over a period of 14 years. Features seem to be different in Arab-American patients, probably related to migration, "occidentalization" of life style and improvement in socio-economic level.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.181-186
• /
• 2001

JLF-1 steel (Fe-9Cr-2W-V-Ta), low activation ferritic steel, is one of the promising candidate materials fer fusion reactor applications. High temperature fatigue life and tensile strength of JLF-1 steel and its TIG welded joints were investigated at the room temperature and $400^{\circ}C$. The strength of base metal (JLF-1) is in between those of weld metal and the HAZ. When the test temperature was increased from room temperature to $400^{\circ}C$, both strength and ductility decreased for base metal, weld metal and the HAZ. The longitudinal specimens of base metal showed similar strength and ductility compared with those of the transverse specimens at room temperature and $400^{\circ}C$. Little anisotropy was observed in the JLF-1 steel base metal in terms of rolling direction. Fatigue limit of weld metal which was obtained from cross-weld specimen is 495MPa. Thus, the weld metal showed the higher fatigue limit than those of base metal at both room temperature and $400^{\circ}C$. Little anisotropy of fatigue properties was observed for JLF-1 base metal in terms of rolling direction. When the test temperature was increased from room temperature to $400^{\circ}C$, the fatigue limit of both base metal and weld metal decreased substantially.