• Journal of Microbiology and Biotechnology
• /
• v.16 no.1
• /
• pp.118-125
• /
• 2006

The region responsible for replication of the megaplasmid pAtC58 in the nopaline-type Agrobacterium tumefaciens strain C58 was determined. A derivative ofa Co1E1 vector, pBluscript SK-, incapable of autonomous replication in Agrobacterium spp, was cloned with a 7.6-kb Bg1II-HindIII fragment from a cosmid clone of pAtC58, which contains a region adjacent to the operon for the utilization of deoxyfructosyl glutamine (DFG). The resulting plasmid conferred resistance to carbenicillin on the A. tumefaciens strain UIA5 that is a plasmidfree derivative of C58. The plasmid was stably maintained in the strain even after consecutive cultures for generations. Analysis of nested deletions of the 7.6-kb fragment showed that a 4.3-kb BglII-XhoI region sufficiently confers replication of the derivative of the ColE1 vector on UIA5. The region comprises three ORFs, which have high homologies with repA, repB, and repC of plasm ids in virulent Agrobacterium spp. including pTiC58, pTiB6S3, pTi-SAKURA, and pRiA4b as well as those of symbiotic plasmids from Rhizobium spp. Phylogenie analysis showed that rep genes in pAtC58 are more closely related to those in pRiA4 than to pTi plasmids including pTiC58, suggesting that the two inborn plasmids, pTiC58 and pAtC58, harbored in C58 evolved from distinct origins.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.4
• /
• pp.822-828
• /
• 2004

Nopaline-type Agrobacterium tumefaciens strain C58 cannot utilize octopine (Oct) as the sole carbon and nitrogen sources. This strain harbors two plasmids; a virulent plasmid, pTiC58, and a megaplasmid, pAtC58. From strain NT1, which is a derivative of C58 harboring only pAtC58, we isolated spontaneous mutants that utilize Oct as the sole nitrogen source. These Oct-catabolizing mutants, however, could not utilize the opine as the sole carbon source. In contrast, strain UIA5, a plasmid-free derivative of C58, could not give rise to such mutants. The mutations isolated from NT1 were mapped to socR in pAtC58, which is a negative regulator of the soc operon responsible for the uptake and catabolism of an Amadori opine, deoxyfructosyl glutamine (Dfg). A derivative of UIA5 carrying a clone of the soc operon with a transposon inserted in socR also utilizes Oct as the sole nitrogen source. However, UIA5 harboring the operon with mutations in each of the structural genes in the soc operon, socA, B, C, and D, lost the ability to generate spontaneous Oct-utilizing mutants, suggesting that soc genes in pAtC58 are required for the utilization of Oct as a nitrogen source, and that derepressed expression of these genes allows cells to utilize Oct. In contrast, Oct-catabolizing mutants derived from C58, which grew using Oct as the sole nitrogen source, could also utilize the opine as the sole carbon source. These mutants did not carry any detectable mutations in socR or the region upstream to the gene in pAtC58, suggesting that mutations occurring elsewhere in the genome, most likely in pTiC58, allow the uptake and catabolism of the opine.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.1
• /
• pp.47-58
• /
• 2004

Loss factors of A356, Mn-Cu alloy and aluminum matrix composites reinforced with $SiC_p$ and Ni-coated graphite particles at various contents have been investigated using clamped-free cantilever beam method. The loss factors of half-power bandwidth of the specimens were measured over a wide range of frequencies from 50 to 3300Hz. Among the specimens, Al-10%$SiC_p$-10%$C_p$ showed the highest loss factor at the mode I, while Mn-Cu alloy showed the highest loss factors at the modes II and III. Consequently, at the mode I the Al-10%$SiC_p$--10%$C_p$ showed the loss factor of 0.00093, which is 2.64 and 1.58 times higher than those of A356 and Mn-Cu alloy, respectively.

• Journal of Korean Neurosurgical Society
• /
• v.58 no.4
• /
• pp.341-345
• /
• 2015

Objective : To measure the orientation of the facet joints of cervical spine (C-spine) segments in the sagittal plane, known as the pedicle-facet (P-F) angle, and to use these measurements to evaluate the relationship between the P-F angle and the amount of vertebral anterolisthesis in patients with degenerative cervical spondylolisthesis (DCS). Methods : A retrospective case-control study was performed including 30 age- and sex-matched patients with DCS and 30 control participants. Anterior-posterior and lateral view radiographs of the C-spine were obtained in a standing position. The P-F angle at all cervical levels and the amount of anterolisthesis at C4-5 were measured from lateral view plain radiographs. Results : The P-F angles at C4-5 were $141.14{\pm}7.14^{\circ}$ for the DCS group and $130.53{\pm}13.50^{\circ}$ (p=0.012) for the control group, and at C5-6 were $137.46{\pm}8.53^{\circ}$ for the DCS group and $128.53{\pm}16.01^{\circ}$ for the control group (p=0.001). The mean P-F angle at C4-5 did not correlate with the amount of anterolisthesis (p=0.483). The amount of anterior slippage did correlate with age (p<0.001). Conclusion : The P-F angle was intrinsically higher at C4-5, compared to C5-6, in both the DCS and control groups, which might explain the increased likelihood for anterolisthesis of C4. Higher P-F angles in the DCS group may be a predisposing factor to slippage. The P-F angle may interact with age to increase incidence of anterolisthesis with increasing age.

• Korean Journal Plant Pathology
• /
• v.11 no.3
• /
• pp.258-264
• /
• 1995

Production and some properties of chitinolytic enzymes were investigated by 80% ammonium sulfate precipitates (crude enzymes) from culture supernatant of antagonistic bacteria, Chromobacterium violaceum strain C-61 and strain C-72, Aeromonas hydrophila, Aeromonas caviae, and Serratia marcescens. The maximum production of chitinase was obtained from the 3-day culture at 28$^{\circ}C$ in C. violaceum stains, the 6-day culture in S. marcescens, and the 2-day culture in A. hydrophila and A. caviae. In the optimum culture periods, chitinase activity of C. violaceum strains C-61 was 1.5, 5.5, 12.0 and 11.3 times higher than those of strain C-72, S. marcescens, A. hydrophila and A. caviae, respectively. However, N,N'-diacetylchitobiase activity was 3.2 times higher in S. marcescens than in C. violaceum strain C-61, and that of Aeromonas spp.was very low. On gels containing glycol chitin, chitinase of C. violaceum strains showed four isoforms of 54-, 52-, 50- and 37-kDa, whereas there were four isoforms of 58-, 52-, 48- and 38-kDa in S. arcescens, three isoforms of 70-, 58- and 54-kDa in A. hydrophila and six isoforms of 90-, 79-, 71-, 63-, 58- and 38-kDa in A. caviae. The chitinase of C. violaceum strain C-61 was most active at pH 7.0 and at 5$0^{\circ}C$ and was stable in ranges of pH 5.0~10.0 for 2 hours and of 0~5$0^{\circ}C$ for 30 min.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.487-492
• /
• 2002

The growth kinetics of intermetallic compound layers formed between eutectic Sn-58Bi solder and (Cu, electroless Ni-P/Cu) substrate were investigated at temperature between 70 and 120 C for 1 to 60 days. The layer growth of intermetallic compound in the couple of the Sn-58Bi/Cu and Sn-58Bi/electroless Ni-P system satisfied the parabolic law at given temperature range. As a whole, because the values of time exponent (n) have approximately 0.5, the layer growth of the intermetallic compound was mainly controlled by volume diffusion over the temperature range studied. The apparent activation energies of Cu$_{6}$Sn$_{5}$ and Ni$_3$Sn$_4$ intermetallic compound in the couple of the Sn-58Bi/Cu and Sn-58Bi/electroless Ni-P were 127.9 and 81.6 kJ/mol, respectively.ely.

• Elastomers and Composites
• /
• v.7 no.1
• /
• pp.53-58
• /
• 1972

Sublimatographic study on the method of test for sulfur in the petroleum and rubber products was as following results: (1) The relation between the heating temperature$(t_h)$ and the vacuum condensing point(V.C.P.) of sulfur at different degree of vacuum appeared as Fig.4. The results were in good agreement with those expected from the $t_h-V.C.P$ curves of sublimatographic separation of sulfur. (2) The relation between the degree of vacuum and the V.C.P. at different heating temperature of sulfur appeared as follows; $$tv.c.p.=\alpha+{\beta}logP_{va}$$ (3) The V.C.P of sulfur could be physical property comparing with melting point and boiling point. (4) The relation between the V.C.P. and the quantity of sublimation of sulfur becomes quantitative as Fig.7.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.95-103
• /
• 2005

The interfacial reaction between 42Sn-58Bi solder (in wt.$\%$ unless specified otherwise) and electroless Ni-P/immersion Au has been investigated before and after thermal aging, with a focus on formation and growth of an intermetallic compound (IMC) layer, consumption of under bump metallurgy (UBM), and bump shear strength. The immersion Au layer with thicknesses of 0 (bare Ni), 0.1, and $1{\mu}m$ was plated on the $5{\mu}m$ thick electroless Ni-P ($14{\~}15 at.\%$P) layer. Then, the 42Sn-58Bi solder balls were fabricated on three different UBM structures by screen-printing and pre-reflow. The $Ni_3Sn_4$ layer (IMC1) was formed at the joint interface after pre-reflow for all the three UBM structures. On aging at $125^{\circ}C$, a quaternary phase (IMC2) was observed above the $Ni_3Sn_4$ layer in the Au-containing UBM structures, which was identified as $Sn_{77}Ni{15}Bi_6Au_2$ (in at.$\%$). The thick $Sn_{77}Ni{15}Bi_6Au_2$ layer deteriorated the integrity of the solder joint and the shear strength of the solder bump was decreased by about $40\%$ compared with non-aged joints.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2002.11b
• /
• pp.58-58
• /
• 2002

This study was excuted to decide the physiological characteristics of Pleurotus Ferulae Lanzi. P. Ferulae Lanzi. was tested to select pertinent substract, temperature and pH range for the growth. Mycelial growth of P. Ferulae Lanzi. was mostly supported on MYPA among other tested synthetic or semi-synthetic media. The temperature range for pertinent mycelial growth was about 25~32$^{\circ}C$ and mostly stimulated at $25^{\circ}C$. And the pertinent pH range of MYPA was 5.0~6.0. The required carbon and nitrogen source for mycelial growth of P. Ferulae Lanzi. was tested. The mycelial growth was mostly stimulated by soluble starch at content. The carbon sources for pertinent mycelial growth was starch or maltose. And the nitrogen source for pertinent mycelial growth was yeast extract.

• Solar Energy
• /
• v.11 no.2
• /
• pp.41-50
• /
• 1991

Heat transfer phenomena and temperature characteristics in heat storage and release process in the heat storage system using PCM(Phase Change material) were studied experimentally. The melting points of Octacosane paraffin($C_{28}H_{58}$) and sodium pyrophosphate decahydrate ($Na_4P_2O_7{\cdot}10H_2O$) used for phase change materials are $62^{\circ}C$ and $79^{\circ}C$ respectively. Experiments were performed in order to investigate temperature distributions, the heat storage quantity and the release quantity on octacosane paraffin and sodium pyrophosphate decahydrate for heat storage and release in the heat storage system. Furthermore the comparison of these characteristics between paraffin and $Na_4P_2O_7{\cdot}10H_2O$ were evaluated. In case of the paraffin, temperature slowly increased at early heat storage process by natural convection, while temperature of $Na_4P_2O_7{\cdot}10H_2O$ rapidly increased the dominant role played by conduction at early heat storage processing Also, during the heat storage and release process in case of the paraffin, it was observed that the variation of temperature of the neighborhood of wall and center in the top and bottom of the tube exhibited a great difference, however in $Na_4P_2O_7{\cdot}10H_2O$, it was observed that the variation of temperature exhibited a little difference. And heat storage quantity of each PCM of identity mass in heat storage process was shown that $Na_4P_2O_7{\cdot}10H_2O$ exhibited more by 16 percents than paraffin.