• Molecular & Cellular Toxicology
• /
• v.3 no.3
• /
• pp.190-194
• /
• 2007

Gastric adenocarcinoma (GA) is a major tumor type of gastric cancers and subdivides into several different tumors such as papillary, tubular mucinous, signet-ring cell and adenosquamous carcinoma according to histopatholigical determination. In other hand, GA is also subdivided into intestinal and diffuse type of adenocarcinoma by the Lauren?fs classification. In this study, we have examined differential gene expression pattern analysis of three histologically different GAs of 24 samples by using DNA microarray containing approximately 19000 genetic elements. The hierarchical clustering analysis of 24 gastric adenocarcinomas (12 of intestinal type, 7 of diffuse type and 5 of mixed type) resulted in two major subgroup on dendrogram, and two subgroups included most of intestinal and diffused type of GAs respectively. Supervised analysis of 19 intestinal and diffuse type GAs by using Wilcoxon rank T-test (P<0.01) resulted in 100 outlier genes which exactly separated intestinal and diffuse type of GA by differential gene expression. In conclusion, genome-wide analysis of gene expression of GAs suggested that GAs may subclassify as intestinal and diffused type of GA by their characteristic molecular expression. Our results also provide large-scale genetic elements which reflect molecular differences of intestinal and diffuse type of GAs, and this may facilitate to understand different molecular carcinogenesis of gastric cancer.

• Korean Journal of Microbiology
• /
• v.17 no.4
• /
• pp.165-178
• /
• 1979

Phages of Lactobaciilus casei (PLC) isolated from plant drainage were classified and characterized. The results are as follows : 1. On the basis of host range pattern, phages could be divided into 2 groups (PLC-B and PLC-C). PLC-B group phages could be further divided into 5 sub-groups $(B_1, \;B_2, \;B_3, \;B_4, \;and\;B_5)$. Although PLC-C group phages had the same host range, they could be also divided into 2 sub-groups $(C_1\;and\;C_2)$ by morphlogical type. 2. It was $B_3$ group phages that represented a major proportion (44.4%) of phages tested. However, $B_1$ group phages were shown to have the widest host range. 3. Electron micrographs revealed that the phages fell into three different morphological types. $(B_1, \;B_2, \;and\;B_3)$ group phages hd a hexagonal head (52nm in diameter) and a sheathless noncontractile (245 nm in length). $B_4\;and\;C_2$ group phages had a hexagonal head (56 nm) and a short flexible tail (169nm) having no sheath. $B_5\;and\;C_1$ group phages were shown to have a hexagonal head (81 nm) and a contractile tail (140 nm) having a sheath, a base plate and tail fibers. 4. The inactivation of the phages by antisera indicated that serological relationships correlated completely with morphological types. 5. $B_1, \;C_1\;and\;C_2$ group phages produced a large (1, 2 mm in diameter) plaque with a clear ring. The morphology of plaques of $B_3\;and\;B_5$ group phages was the same as those produced by the above, but the average plaque sizes for $B_3\;and\;B_5$ were 0.8 mm abd 0.5 mm, respectively. $B_2\;and\;B_4$ group phages produced a small (0.5 mm) turbid plaque with an irregular edge. 6. The latent period and the average burst size of $B_1\;and\;B_3$ group phages were 90 min and 100, respectively. These phages reuqired calcium ions for their miltiplication. 7. $B_3$ group phages could not be absrobed to R-variant $KC_1$. 8. The order of resistance of phages to heat was $B_2\;>\;B_1, B_4\;and\;B_5\;>\;B_3\;and\;C_2, \;B_5$ group phages were more stable than $B_3$ in various pH values. $C_2$ group phages were more sensitive to UV irradiation than $B_1\;and\;B_3$ group phages. 9. Strains YIT9018 and IAM 1043 were induced by mitomycin C treatment. Phage particles detected in the lysates had a hexagonal head (38 and 49 nm, respectively), but no tail. Any sensitive indicator strain could not be isolated in spite of repaeated trials.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.10a
• /
• pp.15-15
• /
• 1999

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the conventional rotating barrel. vibrational barrel (vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components, The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed that the average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value, Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components, However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. $2HD{\;}+{\;}e{\;}{\rightarrow}20H{\;}+{\;}H_2$ Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure thereby resulting to bad plating condition. 1 lot of chip was divided into two equal partion. Each portion was loaded to the same barrel one after the other. Nickel plating and tin-lead plating was performed in the same station. Portion A maintained the normal barrel vibration intensity and portion B vibration intensity was increased two steps higher. All other parameters, current, solution condition were maintained constant. Generally, plating method find procedures were carried out in a best way to maintained the best plating condition. After plating, samples were taken out from each portion. molded and polished. Plating thickness was investigated for both. To check consistency of results. 2nd trial was done now using different lot of another characteristics.

• Restorative Dentistry and Endodontics
• /
• v.15 no.2
• /
• pp.77-92
• /
• 1990

The purpose of this study was to evaluate the cytotoxic effects of 6 cavity liners in vitro. Human fibroblasts were cultured in ${\alpha}$-MEM and each liner was manually mixed and filled in glass ring cylinder ($8{\times}8mm$ in diameter, in height). The cylinders filled with the liners were placed in the center of the dish (35mm in diameter) containing 3ml of ${\alpha}$-MEM. Millipore filters (pore size $0.22{\mu}m$) to simulate dentin barrier were also placed between the bottom of cylinder and the dish. Then the culture dishes were stored in 5% $CO_2$ containing incubator for 5 and 10 days at the temperature of $36.6^{\circ}C$. The results of the experiments were analyzed by counting the cells in the period of 5 and 10 days respectively, and were assessed by calculating the cell multiplication rate and the relative growth rate. The experiemntal groups and the control group were compared statistically. The results of the study were summarized as follows: 1. The cell number of Zinc oxide-eugenol was $(4.13{\pm}1.31){\times}10^4$ cells/ml at 5 days and $(4.32{\pm}1.61){\times}10^4$ cells/ml at 10 days. 2. The cell number of Cavitec was ($8.35{\pm}2.87{\times}10^4$ cells/ml and $(10.08{\pm}5.10){\times}10^4$ cells/ml at 5 and 10 days respectively. 3. The cell number of Dycal was $(13.56{\pm}3.89){\times}10^4$ cells/ml at 5 days and $(34.75{\pm}8.85){\times}10^4$ cells/ml at 10 days. 4. The cell number of life was $(11.46{\pm}3.32){\times}10^4$ cells/ml and $(21.92{\pm}6.18){\times}10^4$ cells/ml at 5 and 10 days. 5. The cell number of Base cement was $(13.73{\pm}3.73){\times}10^4$ cells/ml and $(36.68{\pm}5.20){\times}10^4$ cells/ml at 5 and 10 days. 6. The cell number of Dentin cement was $(13.58{\pm}3.90){\times}10$ cells/ml and $(66.95{\pm}24.09){\times}10$ cells/ml at 5 and 10 days. 7. The cell multiplication rate of zinc oxide-eugenol cements was significantly less than that of the calcium hydroxide and glass ionomer cement. (P < 0.05)

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.3
• /
• pp.206-213
• /
• 2008

We observed the physical and chemical properties of a soil on pine mushroom picking areas where were located in the most upper and lower parts showing a comparative climatic characteristics in Korea. The slope gradients within the investigation areas which were divided into 100 quadrates of $1m^2$ ranged from $5.7{\sim}8.6{\beta}$ to $24{\sim}22.7{\beta}$ (left to right) and $4.5{\sim}6.8{\beta}$ to $13.5{\sim}17.8{\beta}$ (top to bottom) for Ponghwa and Gansung, respectively. The amount of clay and thickness of organic matter were significantly decreased with increasing slope gradient, resulting in decrease of the soil moisture content around a fairly ring-colony of Tricholoma matsutake which was observed under the relatively thicker organic matter layer beyond 3 cm depth. Soil pHswere weak acid and average EC was $0.44dS\;m^{-1}$ in both areas. The cations were in the order of Fe K > Na > Mg > Ca and Fe > K > Na > Ca > Mg for the upper(Gansung) and the lower (Ponghwa) part. And the amount of Fe was approximately $80dS\;m^{-1}$ or greater in the pine mushroom picking soil. From this, we could assume that the growth of the pine mushroom was closely related not only with iron but also soil moisture content.

• Molecular & Cellular Toxicology
• /
• v.4 no.4
• /
• pp.278-284
• /
• 2008

The X-linked inhibitor of apoptosis (XIAP) is a member of a novel family of inhibitors of apoptosis and has several BIR domains (BIR1, BIR2, and BIR3) and a carboxy-terminal RING zinc-finger. Since suppressionof apoptosis is fundamentally important for carcinogenesis and tumor growth, we investigated the expression and function of XIAP in DEN-induced carcinogenesis using rat model. Wistar rats were injected intraperitoneally with DEN at a dose of 50 mg/kg in twice a week for 12 weeks (Group II) and 16 weeks (Group III) followed by the recovery periods, respectively. The evaluation of DEN-induced carcinogenesis carried out the blood, RT-PCR, histopathological and western blot analysis. The level of blood chemistry including GOT/GPT, albumin, and total bilirubin were significantly exchanged comparing to control and Group I/Group II. The expression of albumin and collagen mRNA were significantly exchanged (P<0.05) in both groups. In addition, AFP mRNA expression decreased more after recovery periods than Group II. XIAP was expressed constitutively in normal rat liver as well as DEN-induced Groups I and Group II. In addition, XIAP expression increased more in Group I with 4 weeks recovery periods than Group I. However, XIAP expression shown to increase in Group lI, otherwise, it was decreased in Group II with 10 weeks repair periods. Taken together, these results suggest the alteration of XIAP expression could be involved in hepatocellular carcinogenesis.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.24-29
• /
• 2006

본 논문에서는 광대역 통신 방송 융합 서비스 제공을 고려한 WDM 메트로 링 망을 위한 매체 접근 제어(Medium Access Control; MAC) 프로토콜의 성능을 분석한다. 현재 인터넷은 통신 방송 융합 망으로 진화하고 있으며 다양한 트래픽 특성을 갖는 서비스가 액세스 망에서 메트로 망으로 유입되고 있다. 그러나 기존 메트로 망의 MAC 프로토콜은 이러한 망 환경 변화를 고려하지 않고 단순하고 동일한 트래픽만을 고려하여 성능을 분석하였다. 따라서 본 논문에서는 메트로 링에 연결된 액세스 노드의 입력 트래픽을 Self-Similar와 Poisson 트래픽으로 분류하여 기존 MAC 프로토콜의 성능을 분석하고 평가한다. 메트로 링 망에 연결된 액세스 노드는 이 두 종류의 트래픽 중에서 하나를 망에 유입하며 채널을 공유하는 노드 수에 따라서 다양한 트래픽 환경이 고려된다. WDM 메트로 링망의 기본 MAC 프로토콜은 CSMA/CA(Carrier Sense Multiple Access with Collision Avoidance)이며, 패킷을 빈 슬롯에 전송하고 송신지에서 패킷을 제거하는 SS (Source-Stripping) 기반으로 운용된다. 본 논문에서는 SS 방식으로 생성된 빈 슬롯을 바로 패킷 전송에 이용하는 방식과 그렇지 않은 방식을 각각 1-Persistent와 non-Persistent로 분류하고 MAC 프로토콜을 분석하여 기존 방식의 장 단점을 비교한다. 또한 전송 공정성과 처리율을 같이 고려하여 적용할 수 있는 확률 기반 p-Persistent MAC 프로토콜도 분석하였으며 시뮬레이션을 통하여 각 프로토콜을 노드 처리율, 전송 지연, 패킷 손실률, 전송 공정성 관점에서 비교하고 평가한다.y 수행을 여러 서버로 분산처리하게 함으로써 성능에 대한 신뢰성을 향상 시킬 수 있는 Load Balancing System을 제안한다.할 때 가장 효과적인 라우팅 프로토콜이라고 할 수 있다.iRNA 상의 의존관계를 분석할 수 있었다.수안보 등 지역에서 나타난다 이러한 이상대 주변에는 대개 온천이 발달되어 있었거나 새로 개발되어 있는 곳이다. 온천에 이용하고 있는 시추공의 자료는 배제하였으나 온천이응으로 직접적으로 영향을 받지 않은 시추공의 자료는 사용하였다 이러한 온천 주변 지역이라 하더라도 실제는 온천의 pumping 으로 인한 대류현상으로 주변 일대의 온도를 올려놓았기 때문에 비교적 높은 지열류량 값을 보인다. 한편 한반도 남동부 일대는 이번 추가된 자료에 의해 새로운 지열류량 분포 변화가 나타났다 강원 북부 오색온천지역 부근에서 높은 지열류량 분포를 보이며 또한 우리나라 대단층 중의 하나인 양산단층과 같은 방향으로 발달한 밀양단층, 모량단층, 동래단층 등 주변부로 NNE-SSW 방향의 지열류량 이상대가 발달한다. 이것으로 볼 때 지열류량은 지질구조와 무관하지 않음을 파악할 수 있다. 특히 이러한 단층대 주변은 지열수의 순환이 깊은 심도까지 가능하므로 이러한 대류현상으로 지표부근까지 높은 지온 전달이 되어 나타나는 것으로 판단된다.의 안정된 방사성표지효율을 보였다. $^{99m}Tc$-transferrin을 이용한 감염영상을 성공적으로 얻을 수 있었으며, $^{67}Ga$-citrate 영상과 비교하여 더 빠른 시간 안에 우수한 영상을 얻을 수 있었다. 그러므로 $^{99m}Tc$-transierrin이 감염 병소의 영상진단에 사용될 수 있을 것으로 기대된

• Nuclear Engineering and Technology
• /
• v.5 no.1
• /
• pp.44-54
• /
• 1973

In order to clarify an effective procedure of labelling organic chloro compounds by $^{38}$ Cl, phenyl chloro derivatives(7 kinds), chloro nitrobenzenes(6 kinds), chloro anisoles(2 kinds), chloro anilines(3 kinds), chloro toluenes(3 kinds), benzyl cholorides(4 kinds), and other comparing samples(3 kinds) were irradiated in the TRIGA Mark-II research reactor and the inorganic $^{38}$ Cl yields were compared with the irradiation times after extracting the inorganic portion with an aqueous solution of alkali. It was found that the relative change between the inorganic $^{38}$ Cl yield and the irradiadiation time depends a great deal on the state of the sample, and a solid sample gave a lower and steady inorganic yield. The inorganic $^{38}$ Cl yield was decreased in the order of phenyl chloro derivatives < chloro tol uene$^{38}$ Cl yield of homo functional compounds and the number of chlorine atoms on the benzene ring. Generally, poly chloro substituted derivatives could give a higher yield than those of less chloro substituted. The results were discussed and the feasibility of these results for labelling purpose was criticized.

• Applied Biological Chemistry
• /
• v.29 no.3
• /
• pp.260-265
• /
• 1986

Thermal degradation of ${\beta}-carotene$, major carotenoid present in cured tobacco leaves, were carried out at $400,\;600,\;and\;800^{\circ}C$ which are similar to temperatures existing in the combustion zones of cigarettes, and subsequent volatile degradation products were analyzed by combined gas chromatography-mass spectrometry. The volatile compounds identified from degradation products included 36 aromatic hydrocarbons, 10 ${\beta}-ionone-related$ compounds which have trimethylcyclohexane ring, and 7 others. Of these, 37 compounds including ${\beta}-cyclogeraniol$ had not been previously reported in the literature as thermal degradation products of ${\beta}-carotene$. The major compounds of degradation products at $400\;and\;600^{\circ}C$ were ${\beta}-xylene,\;{\alpha}-terpinene,\;{beta}-cyclocitral,\;ionene\;(1,2,3,4-tetrahydro-1,1,6-trimethyl\;naphthalene),\;{\beta}-ionone$, and dihydroactinidiolide. The major compounds at $800^{\circ}C$ were the above six compounds plus toluene.

• The Korean Journal of Pesticide Science
• /
• v.7 no.2
• /
• pp.100-107
• /
• 2003

To improve the growth inhibitory activity against the shoot and root of rice plant (Oryza sativa L) and barnyard grass (Echinochloa crus-galli), a series of N-substituted phenyl-3,4-dimethylmaleimdes derivatives as substrates were synthesized and then their the inhibitory activities of protoporphyrinogen oxidase (1.3.3.4), protox were measured. The quantitative structure-activity relationships (QSAR) between structures and the inhibitory activities were studied quantitatively using the 2D-QSAR method. And also, molecular sharp similarity between the substrate derivatives and protogen, substrare of protox enzyme were studied. The activities of the two plants indicated that barnyard grass had a higher activity than the rice plant and their correlation relationships have shown in proportion for each. Accordingly, the results of SARs suggest that the electron donating groups as $R_2=Sub.X$ group will bind to phenyl ring because the bigger surface area of negative charged atoms in the substrate molecule derivatives may increase to the higher the activity against barnyard grass. Based on the molecular shape similarity, when the derivatives and protogen, subsbrate of protox enzyme were superimposed by atom fitting, the similarity indices (S) were above 0.8 level but the correlation coefficients (r) between S values and the activities showed not good.