• 제목/요약/키워드: p-xylene

검색결과 322건 처리시간 0.026초

현장탐방 - 하자없는 시공, 철저한 안전관리로 완벽 추구, 성창E&C(주) SK이노베이션 인천 V4-PROJECT

  • 대한설비건설협회
    • 월간 기계설비
    • /
    • 통권290호
    • /
    • pp.53-59
    • /
    • 2014
  • SK이노베이션이 발주한 V-PROJECT는 이미 가동중인 SK에너지 인천COMPLEX 석유화학플랜트 기존 공장에 Condensate와 Crude를 처리하여 Benzene과 p-Xylene 생산시설 및 부대시설 증설 프로젝트이다. 이 시설에서 주로 생산되는 자일렌(p-Xylene)은 폴리에스터 섬유의 원료로서 국내를 비롯하여 중국, 인도, 남미 등의 섬유시장 성장으로 최근들어 수요가 많아짐에 따라 생산시설을 증설한 것이다. 이 프로젝트 완공으로 2015년부터는 기존보다 3배 증가한 벤젠 50만톤, 톨루엔 10만톤, 자일렌 130만톤이 연간 생산될 예정이다. 본지는 V4 Area의 기계설치 및 배관 철골제작 설치, 도장공사를 시공한 성창E&C(주)(대표 김기영)의 이종윤 소장을 만나 플랜트 현장 특성 상 기밀사항인 시공은 생략하고 현장 이야기를 들어 보았다.

  • PDF

BTX(Benzene, Toluene, Xylenes)의 자연발화온도와 발화지연시간의 측정 (Measurements of Autoigniton Temperature(AIT) and Time Lag of BTX(Benzene, Toluene, Xylenes))

  • 하동명
    • 한국안전학회지
    • /
    • 제21권3호
    • /
    • pp.45-52
    • /
    • 2006
  • The AITs(autoignition temperatures) describe the minimum temperature to which a substance must be heated, without the application of a flame or spark, which will cause that substance to ignite. The AITs are often used as a factor in determining the upper temperature limit for processing operations and conditions for handling, storage and transportation, and in determining potential fire hazard from accidental contact with hot surfaces. The measurement AITs are dependent upon many factors, namely initial temperature, pressure, volume, fuel/air stoichiometry, catalyst material, concentration of vapor, time lag. Therefore, the AITs reported by different ignition conditions are sometimes significantly different. This study measured the AITs of benzene, toluene and xylene isomers from time lag using AS1M E659-78 apparatus. The experimental ignition delay times were a good agreement with the calculated ignition delay times by the proposed equations wtih a few A.A.D.(average absolute deviation). Also The experimental AITs of benzene, toluene, o-xylene, m-xylene and p-xylene were $583^{\circ}C,\;547^{\circ}C,\;480^{\circ}C,\;587^{\circ}C,\;and\;557^{\circ}C$, respectively.

흑연과 알루미나 표면 위에서의 o-크실렌의 물리흡착 (Adsorption of o-Xylene on Graphite and Aluce)

  • 김낙중;장세헌
    • 대한화학회지
    • /
    • 제22권6호
    • /
    • pp.380-385
    • /
    • 1978
  • 진공미량저울을 사용하여 Spheron 6 위에서 o-크실렌의 여러 온도에서의 흡착등온곡선을 얻고 이들로 부터 BET 방법을 써서 흡착분자 단면적을 구하였다. 이 단면적의 값은 $-15^{\circ}C$까지에서는 변화가 없었고 -15와 $-14^{\circ}C$ 사이에서 갑자기 변하여 $-14^{\circ}C$ 이상의 온도에서는 다시 일정한 값을 유지하였다. 이 결과는 $-15^{\circ}C$ 보다 낮은 온도에서는 촘촘히 쌓인 편재흡착이 일어나고 $-14^{\circ}C$ 이상의 온도에서는 벤젠고리를 중심으로한 하나의 회전자유도를 얻는 것으로 생각된다.

  • PDF

Diffuer 형태의 중공사막 생물반응기를 이용한 기체상 BTX 제거 (Performance of a Hellow Fiber Membrane Diffuser for the Biological Removal of Gaseous BTX)

  • 손영규;김지형;송지현
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제11권4호
    • /
    • pp.25-32
    • /
    • 2006
  • 본 연구는 산기관(diffuser) 형태로 운전되는 중공사막 생물반응기(Hollow Fiber Membrane Diffuser) 시스템을 복합오염물질(benzene, toluene, p-xylene, BTX)처리에 적용해 보고, 생물반응기에 의한 각 물질의 생분해 특성을 평가하기 위하여 수행되었다. 우선 toluene을 단일오염물질로 적용한 예비 실험기간 동안에 75%수준의 안정적인 처리 효율을 확인할 수 있었다. 이후 BTX 복합오염물질을 적용한 본 실험기간 동안에도 별도의 적응기간 및 악영향 없이 70%수준의 처리효율을 얻어낼 수 있었다. 이를 통하여 toluene분해 미생물의 benzene, p-xylene의 분해 능력을 확인하였으며, toluene의 경우 복합오염물질 적용 시 다른 두 물질에 의해 소폭의 분해 저해가 발생하는 것을 알 수 있었다. 또한 분해능 실험에서 측정한 생물반응기의 BTX 분해능은 약 360 $g/m^3/hr$이었으며, 이는 기존의 생물여과공법에 제시된 최대분해능보다 높은 우수한 분해능이었다. 따라서 산기관 형태의 중공사막 생물반응기는 복합오염물질 처리에도 안정적인 운전특성을 나타내었으며, 기존의 VOCs 저감기술을 대체할 수 있는 친환경적인 기술이라고 판단된다.

Molecular Dynamics Simulation Studies of Benzene, Toluene, and p-Xylene in NpT Ensemble: Thermodynamic, Structural, and Dynamic Properties

  • Kim, Ja-Hun;Lee, Song-Hi
    • Bulletin of the Korean Chemical Society
    • /
    • 제23권3호
    • /
    • pp.447-453
    • /
    • 2002
  • In this paper we have presented the results of thermodynamic, structural, and dynamic properties of model systems for liquid benzene, toluene and p-xylene in an isobaric-isothermal (NpT) ensemble at 283.15, 303.15, 323.15, and 343.15 K using molecular dynamics (MD) simulation. This work is initiated to compensate for our previous canonical (NVT) ensemble MD simulations [Bull. Kor. Chem. Soc. 2001, 23, 441] for the same systems in which the calculated pressures were too low. The calculated pressures in the NpT ensemble MD simulations are close to 1 atm and the volume of each system increases with increasing temperature. The first and second peaks in the center of mass g(r) diminish gradually and the minima increase as usual for the three liquids as the temperature increases. The three peaks of the site-site gC-C(r) at 283.15 K support the perpendicular structure of nearest neighbors in liquid benzene. Two self-diffusion coefficients of liquid benzene via the Einstein equation and via the Green-Kubo relation are in excellent agreement with the experimental measures. The self-diffusion coefficients of liquid toluene and p-xylene are in accord with the trend that the self-diffusion coefficient decreases with increasing number of methyl group. The friction constants calculated from the force auto-correlation (FAC) function with the assumption that the fast random force correlation ends at time which the FAC has the first negative value give a correct qualitative trends: decrease with increase of temperature and increase with the number of methyl group. The friction constants calculated from the FAC's are always less than those obtained from the friction-diffusion relation which reflects that the random FAC decays slower than the total FAC as described by Kubo [Rep. Prog. Phys. 1966, 29, 255].

업종별 유해성 유기물질의 확인에 대한 연구 (A Study on the Identification of Hazardous Organic Substances for Industrial Classification)

  • 박선구;김성수;고오석;정성웅;박준대;유승도;류재근;조현우
    • 분석과학
    • /
    • 제9권4호
    • /
    • pp.392-398
    • /
    • 1996
  • 광주천 유역내에 분포된 8개 업종 26개 배출원의 원폐수로부터 인간에게 유해한 11개의 유기화학물질 tetrachloroethylene, ethyl benzene, p-xylene, o-xylene, isopropyl benzene, n-propyl benzene, 1,2,4-trimethyl benzene, 1,3,5-trimethyl benzene, p-isopropyl toluene, see-butyl benzene, naphthalene을 액체-액체 추출법으로 분리하였다. 추출물 중 각 화합물들의 구조는 기체 크로마토그래피/질량분석계(GC/MS)를 사용하여 확인하였고, 표준시료와 비교함으로써 밝혔다.

  • PDF

토양중 Light Hydrocarbon의 용매추출에 미치는 계면활성제의 영향 (Effect of Surfactant on Solvent Extraction for Light Hydrocarbon from Soils)

  • Hwang, Keon-Joong;Atalay, Asmare
    • 한국환경보건학회지
    • /
    • 제24권2호
    • /
    • pp.74-79
    • /
    • 1998
  • 본 실험은 light hydrocarbon에 오염된 토양을 용매 추출할 때 계면활성제의 영향을 평가하고자 6가지의 계면활성제 (Witbreak DPG-482, Witbreak DRA-22, Witcomul 4016, Witcolate SL-1, Adsee 799, Triton X-100)와 2가지 용매(물, 메타놀)를 대상으로 실험하였다. Light hydrocarbon으로는 benzene, toluene, ethyl bnzene, o-xylene, m-xylene, p-xylene, n-propyl benzene, 1,2,4-trimethyl benzene, 그리고 n-butyl benzene등 9가지를 대상으로 하였다. 계면활성제중 Adsee-799과 Witbreadk DRA-22가 토양중 light hydrocarbon의 물추출 효율을 다소 증가시키는 것으로 나타나고 있으며, 나머지 계면활성제는 효과가 없었다. 또한 물중의 계면활성제의 농도가 0.5%이하에서는 효과가 없는 것으로 나타나고 있으며, 계면활성제의 농도가 4%일때 평균 10.8%의 추출증가 효과가 있었다. 메타놀을 추출용매로 사용할 때에는 Witbread DPG-782와 Witbreak DRA-22가 약 10%의 추출증가 효과를 나타내고 있었다.

  • PDF

초음파 합성법을 이용한 UiO-66의 합성 및 이산화탄소 흡착/자일렌 이성체 분리 연구 (Sonochemical Synthesis of UiO-66 for CO2 Adsorption and Xylene Isomer Separation)

  • 김희영;김세나;김준;안화승
    • Korean Chemical Engineering Research
    • /
    • 제51권4호
    • /
    • pp.470-475
    • /
    • 2013
  • 초음파-용매열 혼합방법으로 염화지르코늄과 1,4-benzenedicarboxylic acid를 사용하여 다공성 금속유기 구조체인 UiO-66을 1-L 규모로 제조하였다. 합성 개시 2시간 뒤 약 $0.2{\mu}m$의 작고 고른 형태와 $1,375m^2/g$의 높은 비표면적을 갖는 결정을 95%의 높은 수율로 얻을 수 있었다. 제조된 UiO-66 물질의 이산화탄소 흡착 거동을 조사한 결과, 1기압 273 K 및 298K에서 각각 198 및 84 mg/g의 흡착량과 32:1 이상의 높은 질소 대비 이산화탄소 흡착 선택성을 갖는 것을 확인하였다. 흡착이 진행됨에 따라 흡착열은 33에서 25 kJ/mol 로 감소하였다. 또한 UiO-66 물질을 사용하여 액상 회분식 조건에서 자일렌 이성체의 분리 연구를 수행하였으며, o-자일렌이 단일성분 최대 흡착능 및 경쟁흡착에서도 m-, p-자일렌 대비 약 2배 이상의 높은 흡착 선호도를 갖는 것을 확인할 수 있었다.

자동차 배출가스 중 BTEX의 비율과 C2-benzenes의 상관성 연구 (A Study on the BTEX Ratio and Correlation of C2-benzenes in Vehicle Exhaust)

  • 문선희;정택호;정성운;김선문;서석준;이승환;김정화;홍유덕;홍희경
    • 한국분무공학회지
    • /
    • 제23권4호
    • /
    • pp.185-191
    • /
    • 2018
  • Benzene, toluene, ethylbenzene and xylene (BTEX) were well known as ozone precursors from photochemical reactions and contribute to the formation of photochemical smog which pose health hazards. Also, some of these compounds directly affect the human health due to their toxicity such as benzene. In this study, BTEX ratios and correlation of $C_2$-benzenes (xylenes, ethylbenzene) in vehicle exhaust from recreational vehicle (RV) and multi-purpose vehicle (MPV) were characterized using a chassis dynamometer. VOCs were collected by tedlar bag and a GC/MS system was used for their quantification. Among all of the BTEX, toluene has the highest concentration(more than 30% in composition of BTEX). The average ratio of toluene to benzene emissions (T/B ratio=2.2) was found in vehicle exhaust. The average m,p-xylene/ethylbenzene and m,p-xylene/o-xylene ratios were 1.0 and 3.0 respectively. As a result, it showed a good correlation between the $C_2$-benzenes ($R^2=0.98{\sim}0.99$). In the future, it can be used as a marker for effect evaluation to atmospheric environment by vehicle exhaust.