• 한국안전학회지
• /
• 제15권3호
• /
• pp.78-82
• /
• 2000

The flash point is an important property and hazardous index of a flammable liquid. The flash points are used by virtually all the environmental, health, and safety organizations in both government and industry to classify flammable liquids for safety and transportation regulations. The basics of all flash points behavior are concerned with the vapor pressure and explosive limits. The flash points of pure components and the mixture of solvents can be calculated with the use of the laws of Raoult, Dalton and Le Chatelier. In this paper, experimentally determined lower flash points of a p-xylene and epoxy resin system were compared with the calculated values by using Raoults law. Calculated lower flash points were in reasonable agreement with the observed values.

• Bulletin of the Korean Chemical Society
• /
• 제8권2호
• /
• pp.73-79
• /
• 1987

In this work we have investigated temperature dependence of spin-rotational relaxation rate, $(1/T_1)_{SR}$, of methyl carbon-13's in 2-bromo-p-xylene, 2,5-dimethylaniline, and 2,5-dimethylanisole and have found that temperature behaviors of two methyl carbon-13's in ortho- and meta-position, respectively, are substantially different. It has been confirmed that the modified Burke-Chan model proposed by Park et al. can nicely explain different temperature dependence of $(1/T_1)_{SR}$ for these two methyl carbon-13's while the original Burke-Chan model fails to do so.

• 한국산업보건학회지
• /
• 제19권4호
• /
• pp.403-411
• /
• 2009

This study was performed to propose appropriate conditions suited to the analysis of naphthalene by comparing desorption efficiencies under various conditions. 1. As to influence by adsorbing media and desorbing solvent on desorption efficiency of naphthalene, when adsorbed by CCT, o-xylene gave the highest desorption efficiency of $73.96{\pm}0.53%$ while the lowest of $1.14{\pm}0.03%$ desorbed by ether. Both XAD-2 and Chromosorb 106 showed around 90% of desorption efficiencies for each solvent, especially desorption efficiencies more than 95% were achieved when adsorbed by Chromosorb 106 and desorbed by $CS_2$ or o-xylene. 2. Desorption efficiencies descended over the storage period in any condition(p<0.05). For all three adsorbing media, while desorption efficiencies showed no significant difference(p>0.05) between room temperature and refrigeration a day of loading, samples kept in room temperature had higher desorption efficiencies than refrigerated ones in 7 and 14 days with significant difference(p<0.05).Also, desorption efficiencies dropped drastically in 7 days, from that point the decreasing tendency went mild. 3. When respective 1 TLV and 0.1 TLV of naphthalene were spiked on CCT and desorbed by CS2($46.45{\pm}0.59%$ vs. $30.15{\pm}0.81%$), o-xylene($73.96{\pm}0.53%$ vs. $67.51{\pm}1.34%$), and ether($1.14{\pm}0.03%$ vs. N.D.) desorption efficiencies increased as the amount of loading increased(p<0.05).On the other hand, naphthalene spiked on XAD-2 and Chromosorb 106 indicated no significant difference(p>0.05) in desorption efficiencies between 1 TLV and 0.1 TLV. In conclusion, in order for favorable desorption efficiencies of naphthalene it is important to select appropriate adsorbing media and desorbing solvent accordingly. The result revealed that adsorbing media of XAD-2 and Chromosorb 106 outperformed CCT and desorbing solvents of $CS_2$ and o-xylene achieved over 90% of desorption efficiencies when adsorbed on XAD-2 and Chromosorb 106. Also, considering the tendency that desorption efficiencies of naphthalene decrease with time, the samples should be analyzed as soon as possible.

• Bulletin of the Korean Chemical Society
• /
• 제32권5호
• /
• pp.1463-1464
• /
• 2011

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1993년도 ACT 93
• /
• pp.877-881
• /
• 1993

• 한국환경보건학회지
• /
• 제30권5호
• /
• pp.481-486
• /
• 2004

Vehicle occupant exposure to air pollutants has been a subject of concern in recent years because of higher levels of air pollutants inside gasoline or diesel-using vehicle, comparing to the surrounding atmosphere. Contrary to previous studies, fuel of vehicles operated in this study was liquefied petroleum gas (LPG). This study examined the potential exposure and removal efficiency of selected volatile organic compounds (VOCs), nitrogen dioxide ($NO_2$) and respirable suspended particle (RSP) by commercial air cleaning device inside vehicle under different ventilation conditions. Vehicle concentrations inside of benzene, toluene, m,p-xylene, $NO_2$ and RSP were lower under the low ventilation condition. This was indicated that outdoor air pollutants could affect the vehicle air quality inside in case metropolitan cities such as Daegu. The urban vehicle concentrations inside of benzene, toluene, m,p-xylene, $NO_2$ and RSP with air cleaning device were higher than those without air cleaning device. This means that the use of air cleaning device equipped with activated carbon filter, which was used in this study, in the interior of vehicles could be expected to reduce the vehicle occupants exposure to air pollutants effectively. In batch type reactor of laboratory scale, removal efficiencies of air cleaning device used were $97.0\%,\;95.7\%,\;94.6\%\;and\;85.5\%$ respectively in benzene, toluene, m,p-xylene and $NO_2$.

• Asian Journal of Atmospheric Environment
• /
• 제9권1호
• /
• pp.57-65
• /
• 2015

We measured the concentrations of five aromatic hydrocarbons (benzene, toluene, ethylbenzene, m,p-xylene, and styrene) in the atmosphere during four seasonal campaigns at Deokjeok and Jeju Islands in the Yellow Sea from October 2005 to June 2006. Toluene was the most abundant aromatic hydrocarbon, with median of 0.24 ppb at Deokjeok and 0.20 ppb at Jeju, followed by benzene (0.21 ppb, 0.15 ppb) and m,p-xylene (0.06 ppb, 0.06 ppb). Aromatic hydrocarbon measurements exhibited the typical seasonality of the major emission sources, such as vehicle exhaust, solvent evaporation, and regional circulation patterns. The ratios of m,p-xylene/ethylbenzene of 1.57 at Deokjeok and 1.05 at Jeju reflected the degree of proximity to outflows of each source region, South Korea and China. The toluene/benzene ratios of 1.0 were consistently both on field observations and on the 3-D chemical model simulation, which is slightly higher than that in the Western Pacific area. It implied that the air over the Yellow Sea was influenced to a great extent by the surrounding areas. We confirmed that current emission inventories of aromatic hydrocarbons in Northeast Asia reasonably reproduced temporal and spatial variations of toluene and benzene over the Yellow Sea.

• 상하수도학회지
• /
• 제22권2호
• /
• pp.187-193
• /
• 2008

Biological removal capacities for volatile organic compounds (VOCs) were determined using a yeast strain, Candida tropicalis. In this study, VOCs including toluene, benzene, p-xylene, and styrene as single substrates or mixtures were tested in the batch culture of the yeast strain. In addition, a kinetic model was applied to evaluate substrate interactions between the VOCs. The yeast strain was able to biodegrade each VOC effectively as a growth substrate, implying it could applied to wide range of VOCs. When the yeast strain was subjected to VOCs in mixtures, the biodegradation rate of one substrate were either increased (stimulated) or decreased (inhibited) by the presence of the others. Both benzene and toluene were inhibited by the other VOCs, and substrate interaction parameters estimated in the model indicated that styrene was the strongest inhibitor for the benzene and toluene biodegradation. Meanwhile, the biodegradation of p-xylene and styrene was stimulated by the presence of either benzene or toluene. The biodegradation rate of p-xylene was significantly increased especially by the presence of toluene, and the styrene biodegradation was enhanced greatly by the benzene addition. The results of the substrate interaction by the yeast strain suggest that the biodegradation rates for the VOCs in mixtures should be carefully evaluated. Furthermore, the competitive inhibition coefficient could be applied as a useful index to determine the substrate interaction

• 분석과학
• /
• 제12권5호
• /
• pp.428-435
• /
• 1999

액체섬광계수기를 이용한 수용액시료 중의 미량의 Rn-222 및 Ra-226 농도 측정을 위한 분석방법을 확립하였다. 라돈 분석을 위해 자이렌계열 섬광용액(xylene-based cocktail) 12 mL를 사용하여 물 시료(10mL)내 라돈을 선택적으로 용매 추출하였다. 추출된 라돈을 측정용기 내에서 딸핵종과의 방사 평형을 위해 3시간동안 방치한 후 저준위 액체섬광계수기를 이용하여 계측하였다. Ra-226 분석을 위해서는 화학적 분리과정을 거친 후 자이렌 계열 섬광용액이 포함된 측정용기 내에서 일정 기간동안의 방사평형을 거쳐 생성된 Rn-222 및 알파선 딸핵종을 계측하였다. Rn-222 및 그의 알파선 딸핵종의 계측을 위한 최적 파형분석(PSA) 준위는 바탕시료에 대한 최대 효율값(Figure of Merit)을 조사하여 설정하였다. PSA 준위 100에서 폴리에틸렌 용기와 자이렌계열 섬광용액을 사용하여 준비된 시료를 200분 동안 계측하였을 때 얻어진 검출하한값(MDA)은 알파선의 총 피크영역에서 0.14 Bq/L(3.78 pCi)이었고, Po-214 만의 피크영역에서는 0.06 Bq/L(1.63 pCi)이었다. 섬광용액에 대한 시료의 부피비와 시료용기의 취급 및 시료용기를 통한 라돈기체의 손실등이 계측치에 미치는 영향을 고찰하였다.

• 분석과학
• /
• 제12권2호
• /
• pp.141-150
• /
• 1999

영산강 수계 광주천, 황룡강, 지석천, 영산강 상류 유역내에 분포된 9개 업종 76개 배출원의 원폐수 및 방류수로부터 20개 유기화학물질 tetrachloroethylene, toluene, ethylbenzene, p-xylene, m-xylene, isopropyl benzene, stylene, bromobenzene, 1,3,5-trimethylbenzene, 2-chlorotoluene 1,2,4-trimethylbenzene, p-isopropyltoluene, 4-chlorotoluene, n-butylbenzene, 1,2,4-trichlorobenzene, naphthalene, tert-butylbenzene, sec-butylbenzene, phenol, isopropyl benzene hydroperoxide를 액체-액체 추출법으로 분리하여 기체 크로마토그래피/질량 분석계(GC/MS)로 분석하였고, 포준품과 비교함으로써 밝혔다. 특히, 화학업종의 원폐수에는 검출되지 않았으나 방류수에는 폐놀과 이소프로필벤젠 하이드로퍼옥사이드가 검출되었다. 중금속 Cr, Mn, Cu, Zn, Cd, Pb, As, Al, Fe은 모든 업종의 원폐수에 대부분 함유되어 있었으며, 이중 Fe와 Al은 다른 중금속에 비행 원폐수에 다소 많이 검출되었다. Cr, Cd, Pb, As은 전기전자, 금속업종의 원폐수에서 다소 많은 양이 함유되었으며, 이러한 9개 중금속들은 폐수처리과정에서 거의 처리가 되어 방류수에는 환경 기준 이하로 검출되거나 불검출되었다.