• 대한수학회보
• /
• 제55권6호
• /
• pp.1627-1638
• /
• 2018

In this paper, we study an special type of cyclic codes called skew cyclic codes over the ring ${\mathbb{F}}_p+v{\mathbb{F}}_p+v^2{\mathbb{F}}_p$, where p is a prime number. This set of codes are the result of module (or ring) structure of the skew polynomial ring (${\mathbb{F}}_p+v{\mathbb{F}}_p+v^2{\mathbb{F}}_p$)[$x;{\theta}$] where $v^3=1$ and ${\theta}$ is an ${\mathbb{F}}_p$-automorphism such that ${\theta}(v)=v^2$. We show that when n is even, these codes are either principal or generated by two elements. The generator and parity check matrix are proposed. Some examples of linear codes with optimum Hamming distance are also provided.

• 한국멀티미디어학회논문지
• /
• 제6권3호
• /
• pp.556-564
• /
• 2003

스타 그래프와 팬케익 그래프는 하이퍼큐브가 갖는 좋은 성질을 가지면서 하이퍼큐브보다 망 비용이 적은 값을 갖는 상호연결망이다. 매크로-스타 그래프는 스타 그래프를 기본 모듈로 하면서 노드 대칭성, 최대고장허용도, 계층적 분할 성질을 가지면서 스타 그래프보다 망 비용이 개선된 상호연결망이다. 본 논문에서는 그래프의 에지 정의를 이용하여 스타 그래프, 팬케익 그래프, 매크로-스타 그래프 사이의 임베딩 방법을 제시한다. 스타 그래프 $S_n$은 팬케익 그래프 $P_n$에 연장율 4에 임베딩 가능하고, 매크로-스타 MS(2,n)은 팬케익 그래프에 연장율 4에 임베딩 가능함을 보인다. 또한, 팬케익 그래프를 스타 그래프와 매크로-스타 그래프에 임베딩하는 비용이 O(n)임을 보인다.

• 전기학회논문지P
• /
• 제65권4호
• /
• pp.250-254
• /
• 2016

In this paper, solar-cell modules were fabricated by low-temperature bonding method of construction using CF. CF adhesive strength of cells at 180 degree using 3bus bar structure was measured average 2.4N. As the bonding temperature got higher, Voc and Iscwas increased. And at $185^{\circ}C$, Rseries was measured 0.013[${\Omega}$] which is the highest point. At $185^{\circ}C$, 2N and 6sec in bonding time, $P_{max}$ was measured 3.954[W], fillfactor was measured 67.36[%] and efficiency was measured13.178[%] the highest point.

• Nonlinear Functional Analysis and Applications
• /
• 제27권2호
• /
• pp.249-259
• /
• 2022

Let 𝓐 be a unital C^*-algebra. Then it follows that $\sum\limits_{i=1}^{n}(a_ia^*_i)^{\frac{1}{2}}{\leq}\sqrt{n}\(\sum\limits_{i=1}^{n}a_ia^*_i\)^{\frac{1}{2}}$, ∀n ∈ ℕ, ∀a₁, …, a_n ∈ 𝓐. By modifications of arguments of Botelho-Andrade, Casazza, Cheng, and Tran given in 2019, for certain n-tuple x = (a₁, …, a_n) ∈ 𝓐ⁿ, we give a method to compute a positive element c_x in the C^*-algebra 𝓐 such that the equality $$\sum\limits_{i=1}^{n}(a_ia^*_i)^{\frac{1}{2}}=c_x\sqrt{n}\(\sum\limits_{i=1}^{n}a_ia^*_i\)^{\frac{1}{2}}$$ holds. We give an application for the integral of Kasparov. We also derive a formula for the exact constant for the continuous ℓ₁ - ℓ₂ inequality.

• 한국환경과학회지
• /
• 제8권3호
• /
• pp.355-361
• /
• 1999

The aim of this study is to develop the water quality simulation model (BAYQUAL) that deal with the physical, chemical and biological aspects of fate/behavior of pollutants in the bay. BAYQUAL is a two dimensional, time-variable finite element water quality model based on the flow simulation model in bay(BAYFLOW). The algorithm is composed of a hydrodynamic module which solves the equations of motion and continuity, a pollutnat dispersion module which solves the dispersion-advection equation. The applicability and feasibility of the model are discussed by applications of the model to the Kwangyang bay of south coastal waters of Korea. Based on the field data, the BAYQUAL model was calibrated and verified. The results were in good agreement with measured value within relative error of 14% for COD, T-N, T-P. Numerical simulations of velocity components and tide amplitude(M2) were agreed closely with the actual data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.177-179
• /
• 2008

This paper, we proposed the theoretical model which includes series resistance $R_s$ and shunt resistance $R_{sh}$ of single-crystalline PV module and used numerical method based on physics. Series resistance $R_s$ was derived from approach for p-n junction diode instead of established form obtained from the simulator with irradiance changes. Electrical output characteristics for PV modules to count the effect of $R_s$ were then studied. Finally simulation results were compared to experimental data leading to good agreement.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1992년도 추계 총회 및 학술발표회
• /
• pp.34-35
• /
• 1992

Synthetic membrane processes are widely used in many industrial applications for concentrating and fractionating various components in solutions and suspensions. Advantages for using these processes include no phase change, direct separation without the use of additives, exploitation of large property differences.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2007년도 춘계학술발표회 초록집
• /
• pp.19-19
• /
• 2007

Recently, we have developed p-i-n hydrogenated amorphous silicon (a-Si:H) single junction (SJ) thin film solar cells with RF (13,56MHz) plasma enhanced chemical vapor deposition (PECVD) systems, and also successfully fabricated the mini-modules (>300$cm^2$), using laser scribing technique to form an integrated series connection, The efficiency of a mini-module was 7.4% (Area=305$cm^2$, $I_{SC}$=0.25A, $V_{OC}$=14.74V, FF=62%).

• 전기학회논문지
• /
• 제58권1호
• /
• pp.107-112
• /
• 2009

This paper describes design and fabrication issues of the SiP(System in Package) one-chip for a portable digital broadcasting receiver. It includes RF tuner chip, demodulator chip and passive components for the receiver system. When we apply the SiP one-chip technology to the broadcasting receiver, the system board size can be reduced from $776mm^2$ to $144mm^2$. SiP one-chip has an advantage that the area reduces more 81% than separated chips. Also the sensitivity performance advances -1dBm about 36 channels in the RF weak electric field, the power consumption reduces about 2mW and the C/N keeps on the same level.

• 마이크로전자및패키징학회지
• /
• 제15권4호
• /
• pp.93-100
• /
• 2008

고온 발전용 열전모듈을 p-type으로는 $Ca_{2.7}Bi_{0.3}Co_4O_9$, n-type으로는 $Ca_{0.96}Bi_{0.04}Mn_{0.96}Nb_{0.04}O_3$을 선택하고 알루미나 기판 위에 1쌍과 2쌍을 제조하였다. 산화물 열전 모듈의 최적화 설계를 위해 먼저 1쌍의 열전모듈의 실험 결과로부터 전극의 접촉저항을 산출하여 2쌍 모듈에 적용함으로써 저항과 출력 특성을 예측하였다. 예측된 2쌍 모듈의 계산 값과 제조된 2쌍 모듈의 실측 값을 비교함으로써 모듈 설계를 위한 접근방법을 검토하였다. 2쌍 모듈의 계산된 저항과 측정된 저항은 각각 $T_h$=833 K에서 0.954 $\Omega$과 1.105 $\Omega$으로 약 0.15 $\Omega$ 정도의 차이로 근접한 결과를 얻었으며, 제시된 방법으로 고온산화물 열전 모듈 제작에 유효하다고 판단된다.