• Korean journal of food and cookery science
• /
• v.17 no.4
• /
• pp.412-420
• /
• 2001

This study was conducted to identify the optimum cooking method and the ideal composition of Wax gourd Jung Kwa for the purpose of wide distribution. Wax gourd Jung Kwa was made by peeling off the wax gourd, digging out the stuff, slicing, soaking the pieces in ash water, and boiling slightly, then boiling down in honey, grain syrup. sugar, etc. As a result of sensory evaluation, the best color of Jung Kwa was observed in the recipe of pretreated wax gourd 300g, water 1 litre and grain syrup 495$m\ell$; for the flavor, hardness and chewiness, Pretreated wax gourd 300g, water 1 litre, corn syrup 475$m\ell$ and sugar 70g; for the adhesiveness, pretreated wax gourd 300g, water 1 litre and corn syrup 515$m\ell$; for the sweetness, pretreated wax gourd 300g, water 600$m\ell$ and sugar 90g and honey 120g. Overall Qualify was the highest in the recipe of pretreated wax gourd 300g, water 1 litre, com syrup 475$m\ell$ and sugar 70g, of which the sweetness was 74%. There were significant differences in all items (P＜0.05). For mechanical characteristics, the maximum cutting force was the highest in the samples with the recipe of pretreated wax gourd 300g, water 1 litre, corn syrup 475$m\ell$ and sugar 70g, and there were significant differences among all items (P<0.05). The highest moisture content, 45.54%, was observed in the recipe of pretreated wax gourd 300g. water 1 litre and corn syrup 475$m\ell$. There were significant differences among all items (P＜0.05). The L value(lightness) was the highest in the recipe of pretreated wax gourd 300g, water 1 litre, corn syrup 475 $m\ell$ and sugar 50g. The a value(redness) was the highest in the case of pretreated wax gourd 300g, water 1 litre, com syrup 475$m\ell$ and sugar 70g, which was almost red; and the b value(yellowness), wax gourd 300g, water 1 litre and corn syrup 475g, which gave almost Yellow color. Taking consideration of the above results, the most desirable recipe for wax gourd Jung Kwa was to mix the 300g of pretreated wax gourd with 20g of ash powder, boil them slightly for 2 min, soak them in cold water for 1 hour, and boil them down with 475$m\ell$ of com syrup, 70g of sugar, and 1 litre of water for 5 hours, resulting in the sweetness of 74%. The samples with above recipe were the best in flavor, chewiness and hardness in sensory evaluation, and showed the highest maximum cutting force and nearest red color in the mechanical test.

• Economic and Environmental Geology
• /
• v.26 no.3
• /
• pp.327-335
• /
• 1993

Phase relations in the system Pd-Sb-Te were investigated at $1000^{\circ}$, $800^{\circ}$, and $600^{\circ}C$, using the sealed-capsule technique; the quenched products were studied by reflected light microscopy, X-ray diffraction, and electron microprobe analysis. At $1000^{\circ}C$, the solid phases Pd, $Pd_{20}Sb_7$, $Pd_8Sb_3$, $Pd_{31}Sb_{12}$, and $Pd_5Sb_2$ are stable with a liquid phase that occupies most of the isothermal diagram. Additional solid phases at $800^{\circ}C$ are $Pd_5Sb_3$, PdSb, $Pd_8Te_3$, $Pd_7Te_3$, and a continuous $Pd_{20}Te_7-Pd_{20}Sb_7$ solid solution becomes stable. At $600^{\circ}$, $PdSb_2$, $Pd_{17}Te_4$, $Pd_9Te_4$, PdTe, $PdTe_2$, $Sb_2Te_3$, and Sb and continuous PdSb-PdTe and $PdTe-PdTe_2$ solid solutions are stable. All the solid phases exhibit solid solution, mainly by substitution between Sb and Te to an extent that varies with temperature of formation. The maximum substitution (at.%) of Te for Sb in the Pd-Sb phases is: 44.3 in $Pd_8Sb_3$, 52.0 in $Pd_{31}Sb_{12}$, 46.2 in $Pd_5Sb_2$ at $800^{\circ}C$; 15.3 in $Pd_5Sb_3$, 68.3 in $PdSb_2$ at $600^{\circ}C$. The maximum substitution (at.%) of Sb for Te in the Pd-Te phases is 34.5 in $Pd_5Sb_3$ at $800^{\circ}C$, and 41.6 in $Pd_7Te_3$, 5.2 in $Pd_{17}T_4$, 12.4 in $Pd_9Te_4$, and 19.1 in $PdTe_2$ at $600^{\circ}C$. Physical properties and X-ray data of the synthetic $Pd_9Te_4$, PdTe, $PdTe_2$, $Pd_8Sb_3$, PdSb, and $Sb_2Te_3$ correspond very well with those of telluropalladinite, kotulskite, merenskyite, mertieite II, sudburyite, and tellurantimony, respectively. Because X-ray powder diffraction data consistently reveal a 310 peak ($2.035{\AA}$), the $PdSb_2$ phase is most probably of cubic structure with space group $P2_13$. The X-ray powder pattern of a phase with PdSbTe composition, synthesized at $600^{\circ}C$, compares well with that of testibipalladite. Therefore, testibiopalladite may be a member of the $PdSb_2-Pd(Sb_{0.32}Te_{0.68})$ solid solution series which is cubic and $P2_13$ in symmetry. Thus the ideal fonnula for testibiopalladite, presently PdSbTe, must be revised to PdTe(Sb, Te). Borovskite($pd_3SbTe_4$) has not been found in the synthetic system in the temperature range $1000^{\circ}-600^{\circ}C$.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.4
• /
• pp.442-450
• /
• 1999

Background : Isoniazid(INH) and rifampicin(RFP) are the most effective anti-tuberculosis drugs which make the short-course chemotherapy possible. Although prescribed dosages of INH and RFP in Korea are different from those recommended by American Thoracic Society, there has been few study about pharmacokinetic profiles of INH and RFP in Korean patients who receive INH, RFP, ethambutol(EMB) and pyrazinamide(PZA) simultaneously. Methods : Among the patients with active tuberculosis from Dec. 1997 to July 1998, we selected 17 patients. After an overnight fast, patients were given INH 300mg, RFP 450mg, EMB 800mg and PZA 1500mg daily. Blood samples for the measurement of plasma INH(n=15) and RFP(n=17) level were drawn each at 0, 0.5, 1, 1.5, 2, 4, 6, 8 and 12hrs, and urine was also collected. INH and RFP level in the plasma and the urine were measured by high-performance liquid chromatography(HPLC). Pharmacokinetic parameters such as peak serum concentration(Cmax), time to reach to peak serum concentration(Tmax), half-life, elimination rate constant(Ke), total body clearance(CLtot), nonrenal clearance(CLnr), and renal clearance(CLr) were calculated. Results : 1) Pharmacokinetic parameters of INH were as follows: Cmax; $7.63{\pm}3.20{\mu}g/ml$, Tmax; $0.73{\pm}0.22hr$, half-life; $2.12{\pm}0.84hrs$, Ke; $0.83{\pm}0.15hrs^{-1}$, CLtot; $17.54{\pm}8.89L/hr$, CLnr; $14.74{\pm}8.35L/hr$, CLr; $2.79{\pm}1.31L/hr$. 2) Pharmacokinetic parameters of RFP were as follows: Cmax; $8.93{\pm}3.98{\mu}g/ml$, Tmax; $1.76{\pm}1.13hrs$, half-life; $2.27{\pm}0.54hrs$, Ke; $0.32{\pm}0.08hrs^{-1}$, CLtot; $14.63{\pm}6.60L/hr$, CLr; $1.04{\pm}0.55L/hr$, CLnr; $13.59{\pm}6.21L/hr$. 3) While the correlation between body weight and Cmax of INH was not statistically significant (r=-0.514, p value>0.05), Cmax of RFP was significantly affected by body weight of the patients(r=-0.662, p value<0.01). Conclusion : In Korean patients with tuberculosis, 300mg of INH will be sufficient to reach the ideal peak blood level even in the patients over 50kg of body weight However, 450mg of RFP will not be the adequate dose in the patients who weigh over 50~60kg.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.1
• /
• pp.72-105
• /
• 2011

This study explores the value of the Dicentra spectabilis community as a nature reserve in provincial forests at San 1-2, Daea-ri, Dongsang-myeon, Wanju-gun, Jellabuk-do, also known as Gamakgol, while defining the appropriateness of its living environment and eventually providing basic information to protect this area. For these reasons, we investigated 'morphological and biological features of Dicentra spectabilis' and the 'present situation and problems of designing a herbaceous nature reserve in Korea.' Furthermore, we researched and analyzed the solar, soil and vegetation condition here through a field study in order to comprehend its nature reserve value. The result is as follows. According to the analytic result for information on the domestic wild Dicentra spectabilis community, it is evenly spread throughout mountainous areas, and there is one particularly outstanding in size in Wanju Gamakgol. Upon the findings from literature and the field study about its dispersion, Gamakgol has been discovered as an ideal district for Dicentra spectabilis since it meets all the conditions this plant requires to grow vigorously, such as a quasi-high altitude and rich precipitation during its period of active growth duration in May. Dicentra spectabilis grows in rocky soil ranging from 300~375m above sea level, 344.5m on average, towards the north, northwest and dominantly in the northeast. The mean inclination degree is $19.5^{\circ}$. Also, upon findings from analyzing solar conditions, the average light intensity during its growth duration, from Apr. to Aug., is 30,810lux on average and it tends to increase, as it gets closer to the end. This plant requires around 14,000~18,000lux while growing, but once bloomed, fruits develop regardless of the degree of brightness. The soil pH has shown a slight difference between the topsoil, at 5.2~6.1, and subsoil, at 5.2~6.2. Its mean pH is 5.54 for topsoil and 5.58 for subsoil. These results are very typical for Dicentra spectabilis to grow in, and other comparative areas also present similar conditions. Given the facts, the character of the soil in Gamakgol has been evaluated to have high stability. Analysis of its vegetation environment shows a wide variation of taxa numbering from 13 to 52 depending on area. The total number of taxa is 126 and they are a homogenous group while showing a variety of species as well. The Dicentra spectabilis community in the Daea-ri Arboretum is an herbaceous community consisting of dominantly Dicentra spectabilis, Cardamine leucantha, Boehmeria tricuspi and Impatiens textori while having many differential species such as Impatiens textori, Pueraria thunbergiana, Rubus crataegifolius vs Staphylea bumalda, Securinega suffruticosa, and Actinidia polygama. It suggests that it is a typical subcolony divided by topographic features and soil humidity. Considering the above results on a comprehensive level, this area is an excellent habitat for wild Dicentra spectabilis providing beautiful viewing enjoyment. Additionally, it is the largest wild colony of Dicentra spectabilis in Korea whose climate, topography, soil conditions and vegetation environment can secure sustainability as a wild habitat of Dicentra spectabilis. Therefore, We have determined that the Gamakgol community should be re-examined as natural asset owing to its established habitat conditions and sustainability.

• Korean Journal of Organic Agriculture
• /
• v.13 no.3
• /
• pp.315-332
• /
• 2005

This study was conducted to assess the nutritional value and the safety of the fermented food wastes (FFW) made by adding lactobacillus spp. and bacillus spp. at the ratio of 3:7, respectively to food wastes collected everywhere, and also to determine effects on the performances, carcass characteristics and economical profitability when FFW was fed to pigs. For swine trial, FFW was formulate to pellet by utilizing different feed ingredients, and its formulated FFW pellet was used in this feeding trial. Treatments were consisted of different ratios (T1: $100+0\%$, T2: $75+25\%$, T3: $50+50\%$, T4: $25+75\%$, T5: $0+100\%$) of FFW pellet to commercial diet. A total of 20 male pigs were allotted to treatments of five groups of four pigs per pen. Experimental period lasted for 4 months. The nutritional composition of FFW was 56.7, 19.5 and $19.5\%$ for moisture, crude protein and ether extract, respectively. Salt content was $0.39\%$. Noxious microorganisms such as salmonella and E. coli were not detected in FFW, and contents of heavy metal and aflatoxin B1 were lower than the standard. Nutritional values of FFW pellet satisfied over $100\%$ of requirements presented in official Korean feeding standard for swine. Feeding trial for pigs showed that feed intakes were significantly (P<0.05) decreased with increasing levels of FFW pellet. T2 treatment was ideal ratio under the consideration of economical value of feeds and body weight gain of pigs. For carcass characteristics, dressing rate ($\%$) was highest in T3, and carcass grades for T2, T3 and T4 treatments were estimated as 'A'. Feed cost for FFW per kg was ${\won}167.95$, which implies $52\%$ of commercial feed cost (${\won}350/kg$). Thus, this result implied the decreased feed cost in the swine farm. Conclusively, the utilization of food wastes as feed source may lead to the reduced environmental pollution and the practice of organic livestock farming. However, our results showed that excessive amount of fermented food wastes supplementation to pigs might give rise to their reduced palatability and delayed growth.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.4
• /
• pp.283-289
• /
• 1986

To establish a suitability grouping system of paddy soils for multiple cropping of rice with other upland crops, the study was carried out after a few basic experiments. In succession to the results on basic experiment prior, the suitability system proposed and the results of application mentioned in this report were summarized as follows; 1. The factors of soil properties in the system were productivities represented by soil texture and drainage class, as well as salinity of surface and sub-soil pH of chemical properties were considered together with slope, warmth index, ground water table, parent materials etc. of soil physical or environmental conditions. The weights of the factors were combined with multiplicatively and additively so as the total marks of ideal soil to be 100. The system was composed with 5 suitability classes; over 91 mark is class I, under 60 mark class V, and each 10 point interval between classes. The limiting factors "P" (in the case that Physical properties or Productivity marks under 24), "S" (Surface slope less than 15) and "C" (Chemical condition below 15) etc. were appended up to two kinds to the classes except a part of soils in class I. 2. The areas where the warmth index exceed 110 in Yeongnam were 19% for class I, 22.7% for class II, 44.7% for class III, 11.5% for class IV, and 2.1% for class V. The rates in class I and II were slightly more than those of the whole country. 3. The points of each soil gained by the system had a positive correlation ($r=.922^{**}$) with the potential productivities.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.2
• /
• pp.57-65
• /
• 2008

Wastewater containing strong organic matter is very difficult to treat by utilizing general sewage treatment plant. but the wastewater is adequate to generate biomass energy (bio-gas; methane gas) by utilizing anaerobic digestion. EcoDays Plug Flow Reactor (E-PFR), which was already proved as an excellent aerobic wastewater treatment reactor, was adapted for anaerobic food wastewater digestion. This research was performed to improve the efficiency of bio-gas production and to optimize anaerobic wastewater treatment system. Food wastewater from N food waste treatment plant was applied for the pilot scale experiments. The results indicated that the efficiency of anaerobic wastewater treatment and the volume of bio-gas were increased by applying E-PFR to anaerobic digestion. The structural characteristics of E-PFR can cause the high efficiency of anaerobic treatment processes. The unique structure of E-PFR is a diaphragm dividing vertical hydraulic multi-stages and the inversely protruded fluid transfer tubes on each diaphragm. The unique structure of E-PFR can make gas hold-up space at the top part of each stage in the reactor. Also, E-PFR can contain relatively high MLSS concentration in lower stage by vertical up-flow of wastewater. This hydraulic flow can cause high buffering capacity against shock load from the wastewater in the reactor, resulting in stable pH (7.0~8.0), relatively higher wastewater treatment efficiency, and larger volume of bio-gas generation. In addition, relatively longer solid retention time (SRT) in the reactor can increase organic matter degradation and bio-gas production efficiency. These characteristics in the reactor can be regarded as "ideal" anaerobic wastewater treatment conditions. Anaerobic wastewater treatment plant design factor can be assessed for having 70 % of methane gas content, and better bio-gas yielding and stable treatment efficiency based on the results of this research. For example, inner circulation with generated bio-gas in the reactor and better mixing conditions by improving fluid transfer tube structure can be used for achieving better bio-gas yielding efficiency. This research results can be used for acquiring better improved regenerated energy system.

• The korean journal of orthodontics
• /
• v.32 no.6 s.95
• /
• pp.401-411
• /
• 2002

Precise bracket positioning is essential in modem orthodontics. However, there can be alterations in the vertical position of a bracket due to several reasons. The purpose of this study was to evaluate the effect of variations in the vertical bracket position on the crown inclination in Korean patients with normal occlusion. From a larger group of what was considered to be normal occlusions obtained from the Department of Orthodontics, College of Dentistry, Seoul National University, each of the final 10 subjects (6 males and 4 females, with an average age of 22.3 yews) was selected. The dental models of each of the subjects were scanned three-dimensionally by a laser scanner, and measurements drawn from these were made on the scanned dental casts of the subjects were input into the computer program. From this the occlusal plane and the bracket plane were determined. The tooth plane was then constructed to measure the crown inclination on the bracket plane of each tooth. From a practical standpoint, information was obtained on the extent to which the torque of a tooth would be changed as the bracket position was to be moved vertically (in ${\pm}0.5mm,\;{\pm}1.0mm,\;{\pm}1.5mm$) from its ideal position. A one way analysis of the variance (ANOVA) was used to compare each group of the different vertical distances from the bracket plane on a specific tooth. Duncan's multiple comparison test was then performed. There were statistically significant differences in the crown inclination among the groups of different vertical distances for the upper central incisor, upper lateral incisor, upper canine, upper first and second molars, lower first and second premolars, and lower first and second molars (p<0.05). On the upper anterior teeth, upper molars, lower premolars and lower molars, the resultant torque values due to the vertical displacement of the bracket were different depending on the direction of the displacement, occlusal or gingival. This study implies that the torque of these teeth should be handled carefully during the orthodontic treatment. In circumstances in which the bracket must be positioned more gingivally or occlusally due to various reasons, it would be useful to provide the chart of torque alteration of each tooth referred to in this study with its specified bracket prescription.

• Journal of Mushroom
• /
• v.14 no.4
• /
• pp.202-206
• /
• 2016

Oyster mushrooms are widely cultivated and consumed in Korea. P. ostreatus 'Suhan(ASI 2504)' is an ideal cultivar for mushroom farmers due to its dark pileus and thick stipe; however, as it is very sensitive to environmental conditions, an alternative cultivar is required. To develop a new cultivar, parental strains 'Suhan(ASI 2504)' and 'ASI 0665 (Heuktari)' were selected from various collected strains according to morphological characteristics. P. ostreatus 'Soltari' was developed by DiMon crossing between the dikaryotic strain 'Suhan' and the monokaryotic strain derived from 'Heuktari'. Thirty-eight of the 100 crossed strains were selected following analysis of mitochondrial genetic characteristics, and 'Soltari' was ultimately selected by continuous cultivation tests. The mitochondrial DNA profile of 'Soltari' was found to be the same as that of 'Heuktari, and a nuclear DNA profile of 'Soltari' was similar as those of the parental strains, 'Suhan' and 'Heuktari.' 'Soltari' mycelium grows adequately in moderate to high temperatures of $12-20^{\circ}C$, although its optimum temperature was found to be $30^{\circ}C$. Fruiting body production per 1.1-L cultivation bottle was approximately 158.8 g. Its stipe length and thickness were comparable to those of diameter and thickness were somewhat lower (42.72 vs. 51.33 mm and 18.18 vs. 22.46 mm, respectively). 'Soltari' was found to be more resistant to high $CO_2$ atmosphere than 'Suhan', and the color of the pileus of 'Soltari' was dark gray at high temperature. Therefore, it is suggested that this new cultivar 'Soltari' is a good alternative cultivar and will contribute to energy saving in oyster mushroom farms.

• Korean Chemical Engineering Research
• /
• v.47 no.2
• /
• pp.220-229
• /
• 2009

Strain improvement and morphology investigation in bioreactor cultures were undertaken in suspended cultures of Phellinus linteus mycelia for mass production of protein-bound polysaccharides(soluble ${\beta}$-D-glucan), a powerful immuno-stimulating agent. Phellineus sp. screened for this research was identified as Phellinus linteues through ITS rDNA sequencing method and blast search, demonstrating 99.7% similarity to other Phellinus linteus strains. Intensive strain improvement program was carried out by obtaining large amounts of protoplasts for the isolation of single cell colonies. Rapid and large screening of high-yielding producers was possible because large numbers of protoplasts ($1{\times}10^5{\sim}10^6\;protoplasts/ml$) formed using the banding filtration method with the cell wall-disrupting enzymes could be regenerated in relatively high regeneration frequency($10^{-2}{\sim}10^{-3}$) in the newly developed regeneration medium. It was demonstrated that the strains showing high performances in the protoplast regeneration and solid growth medium were able to produce 5.8~6.4%(w/w) of ${\beta}$-D-glucan and 13~15 g/L of biomass in stable manners in suspended shake-flask cultures of P. linteus mycelia. In addition, cell mass increase was observed to be the most important in order to enhance ${\beta}$-D-glucan productivity during the course of strain improvement program, since the amount of ${\beta}$-D-glucan extracted from the cell wall of P. linteus mycelia was almost constant on the unit biomass basis. Therefore we fully investigated the fungal cell morphology, generally known as one of the key factors affecting cell growth extent in the bioreactor cultures of mycelial fungal cells. It was found that, in order to obtain as high cell mass as possible in the final production bioreactor cultures, the producing cells should be proliferated in condensed filamentous forms in the growth cultures, and optimum amounts of these filamentous cells should be transferred as active inoculums to the production bioreactor. In this case, ideal morphologies consisting of compacted pellets less than 0.5mm in diameter were successfully induced in the production cultures, resulting in shorter period of lag phase, 1.5 fold higher specific cell growth rate and 3.3 fold increase in the final biomass production as compared to the parallel bioreactor cultures of different morphological forms. It was concluded that not only the high-yielding but also the good morphological characteristics led to the significantly higher biomass production and ${\beta}$-D-glucan productivity in the final production cultures.