• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.176-176
• /
• 2007

Flat-panel direct conversion detectors used in compound substance of semiconductor are being studied for digital x-ray imaging. Recently, such detectors are deposited by physical vapor deposition(PVD) generally. But, most of materials (HgI2, PbI2, TlBr, PbO) deposited by PVD have shown difficult fabrication and instability for large area x-ray imaging. Consequently, in this paper, we propose applicable potentialities for screen printing method that is coated on a substrate easily. It is compared to electrical properties among semiconductors such as $HgI_2$, $PbI_2$, PbO, HgBrI, InI, and $TlPbI_3$ under investigation for direct conversion detectors. Each film detector consists of an ~25 to $35\;{\mu}m$ thick layer of semiconductor and was coated onto the substrate. Substrates of $2cm{\times}2cm$ have been used to evaluate performance of semiconductor radiation detectors. Dark current, sensitivity and physics properties were measured. Leakage current of $HgI_2$ as low as $9pA/mm^2$ at the operation bias voltage of ${\sim}1V/{\mu}m$ was observed. Such a value is not better than PVD process, but it is easy to be fabricated in high quality for large area x-ray Imaging. Our future efforts will concentrate on optimization of growth of film thickness that is coated onto a-Si TFT array.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.74-77
• /
• 2004

[ $HfO_2$ ] dielectric layers were grown on the p-type Si(100) substrate by metalorganic molecular beam epitaxy(MOMBE). Hafnium $t-butoxide[Hf(O{\cdot}t-C_4H_9)_4]$ was used as a Hf precursor and Argon gas was used as a carrier gas. The thickness of the layers was measured by scanning electron microscopy (SEM) and high-resolution transmission electron measurement(HR-TEM). The properties of the $HfO_2$ layers were evaluated by X-ray diffraction(XRD), high frequency capacitance-voltage measurement(HF C-V), current-voltage measurement(I-V), and atomic force measurement(AFM). HF C-V measurements have shown that $HfO_2$ layer grown by MOMBE has a high dielectric constant(k=19-21). The properties of $HfO_2$ films are affected by various process variables such as substrate temperature, bubbler temperature, Ar, and $O_2$ gas flows. In this paper, we examined the relationship between the $O_2/Ar$ gas ratio and the electrical properties of $HfO_2$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.332-335
• /
• 2004

Boron Phosphide films were deposited on(III) Si substrate at $650^{\circ}C$, by the reaction of $B_2H_6$ with $PH_3$ using CVD. $N_2$ was employed as carrier gas. The optimal gas rates were 20 ml/min for $B_2H_6$, 60 ml/min for $PH_3$ ml/min and $1{\ell}/min$ for $N_2$. The films were annealed for 1hour in $N_2$ ambient at $550^{\circ}C$ and measured. The measurement of AFM shows that the average surface roughness is each $10.108{\AA}$ and $29.626{\AA}$. So, we could know every commonplace thing. The measurement of XRD shows that the films have the preferred orientation of(1 0 1). From SEM images, we could see that Boron Phosphide is showed of a structure, which is grain size, which is grain boundary size. Also, the measurement of AES is shown the films have $B_{13}P_2$ Stoichiometry. From WDX See that ingredient is detected each Boron and Phosporus. So, we could see that deposited BP thin film. In this study, we obtained the BP thin film by deposited in atmosphere pressure, and known to applicate as microwave absorbtion material of BP thin film.

• Natural Product Sciences
• /
• v.22 no.1
• /
• pp.60-63
• /
• 2016

The study is a pioneering effort to determine the mineral, nutritional, and phytochemical composition and phenolic content and to determine the free radical scavenging activity of Gigantochloa levis (Blanco) Merr, a native bamboo species (locally known as "bolo") in the Philippines. Proximate analysis showed that air-dried G. levis leaves contain 15.8% ash, 22.6% crude protein, 1.2% crude fat, 29.3% crude fiber, and 19.7% total sugar. Phytochemical tests indicated the presence of diterpenes, triterpenes, saponins, phenols, tannins, and flavonoids in both the ethanolic and aqueous leaf extracts, while phytosterols were only detected in the ethanolic extract. Folin-Ciocalteu assay determined the total phenolic content in gallic acid equivalents (GAE) to be $85.86{\pm}3.71$ and $32.32{\pm}1.01mg\;GAE/100g$ dried sample for the ethanolic and aqueous extracts, respectively. The total phenolic content in quercetin equivalents (QE) was $74.44{\pm}3.11$ and $29.43{\pm}0.85mg\;QE/100g$ dried sample for the ethanolic and aqueous extracts, respectively. The radical scavenging activity of the different solvent fractions containing varying concentrations of the extract was determined using the 2, 2-diphenyl-1-picrylhydrazyl (DPPH) assay. The ethyl acetate and 1-butanol fractions were found to have the highest radical scavenging activity. Mineral analysis via Energy Dispersive X-Ray Spectrometry (EDS) of the ash of G. levis leaves showed that Si is the major component, followed by K and Mg. These results point to the potential of G. levis leaves as a source of minerals and bioactive compounds with medicinal value.

• Natural Product Sciences
• /
• v.13 no.2
• /
• pp.152-159
• /
• 2007

To demonstrate anti-hyperlipidemic activity of the 19${\alpha}$-hydroxyursane-type triterpenoid (19${\alpha}$-HUT)-rich fraction, this fraction was prepared from the extract of Rubus crataegifolius leaves. This fraction was found to have anti-hyperlipidemic effect in a high fat diet-induced rat model from the observation of reduction of abdominal fat pad weights, atherogenic index and hypercholesterolemia at 30 and 60 mg/kg (p.o.) The 19${\alpha}$-HUT fraction was subjected to SiO$_2$, ODS, and/or Sephadex LH-20 column chromatography to yield a new triterpenoid (1) called pomolic acid ester along with nine known triterpenoids which are all 19${\alpha}$-HUTs: euscaphic acid (2), tormentic acid (3), 23-hydroxytormentic acid (4), kaji-ichigoside F$_1$ (5), rosamultin (6), niga-ichigosides F$_1$ (7) and F$_2$ (8), suavissimoside F$_1$ (9) and coreanoside F$_1$ (10). The structure of compound 1 was established as 28-O-formyl-3,19-dihydroxyurs-12-en-28-oic acid on the basis of 2D-NMR spectroscopic data and mass spectrum. Compound 1 was isolated for the first time from natural sources.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.636-641
• /
• 2011

Purpose: There are multiple dependent variables commonly attributed to survival of replanted digits. The ischemia time is thought to be a clinically relevant factor. However, controversy exists as large hand centers have reported successful replant outcomes independent of ischemic time. In this study, we present a single institution experience on the effect of ischemia time on the survival of completely amputated digits. Methods: A retrospective review of a single institution experience was performed. This cohort included all comers who had suffered complete amputation of a digit (Zone 2-4) and underwent replantation from 2003 to 2009. Demographic information as well as injury mechanism, ischemic time, and replantation outcome were recorded for each patient. Chi-square was used to analyze the result. Results: Mean age was 35.5 years old (2-69). Mean replantation survival was 89.5% (37/317). Survival rates were 94, 88, and 88% in respective groups of 0~6, 6~12, of > 12 hours of ischemia time. In chi-square analysis, there was no difference with $p$ value of 0.257. No other independent patient factors showed statistically significant relationship to replant survival rate. In the group with longest ischemia time (12~18 hours) replant survival rate was 88% (37/42). Conclusion: Prolonged ischemia time is commonly believed to be a contributing factor for replant survival. However, our experience has shown that survival rate is uniform up to 18 hours of ischemia.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.69-69
• /
• 2000

(Ba, Sr)TiO3 (BST)[1-3] 박막은 유전상수가 크고 고주파에서도 유전특성 저하가 적기 때문에 ULSI DRAM(Dynamic Random Access Memory)에 응용 가능한 물질로 최근 각광을 받고 있다. 하지만, 아직 BST 박막을 DRSM에 바로 적용하기 위해선 몇 가지 문제점이 있다. 그 중 누설전류 문제는 디바이스 응용시 매우 중요한 요소이다. 특히, DRAM에서 refresh time와 직접적인 관련이 있어 디바이스 내의 신뢰도 및 전력소모를 결정하는 주된 인자가 된다. 지금까지, BST 박막의 인가전업, 온도, 그리고 전극물질에 따른 누설전류 현상들이 고찰되었고, 이에 관한 많은 전도기구 모델들이 제시되었다. Schottky emission, Poole-Frenkel emission, space charge limited conduction 등이 그 대표적인 예이다. 하지만 아쉽게도 BST 박막의 정확한 누설 전류 전도 기구를 완전히 설명하는데는 아직 한계가 있다. 따라서 본 연구에서는 제작된 BST 커패시터 내의 기본적인 전기적 성질을 조사하고, 정확한 누설전류 기구 규명에 초점을 두고자 한다. 이를 위해 기존의 여러 기구들과 비교 분석할 것이다. 하부전극으로 사용하기 위해 스퍼터링 방법으로 p-Si(100) 기판위에 RuO2 박막을 약 120nm 증착하였다. 증착전의 chamberso의 초기압력은 5$\times$10-6 Torr이하의 압력으로 유지시켰다. Ar/O2의 비는 이전 실험에서 최적화된 9/1로 하였다. BST 박막 증착 시 5분간 pre-sputtering을 실시한 후 하부전극 기판위에 BST 박막을 증착하였다. 증착이 끝난 후 시편을 상온까지 냉각시킨 후 꺼내었다. 전기적 특성을 측정하기 상부전극으로 RuO2와 Al 박막을 각각 상온에서 100nm 증착하였다. 이때 hole mask를 이용하여 반경이 140um인 원형의 상부전극을 증착하였다. BST 박막의 증착온도가 증가하고 Ar/O2 비가 감소할수록 제작된 BST-커패시터의 전기적 성질이 우수하였다. 증착온도 $600^{\circ}C$, ASr/O2=5/5에서 증착된 막의 누설전류는 4.56$\times$10-8 A/cm2, 유전상수는 600 정도의 값을 나타내었다. 인가전압에 따른 BST 커패시터의 transition-current는 Curie-von Schweider 모델을 따랐다. BST 박막의 누설전류 전도기구는 기존의 Schottky 모델이 아니라 modified-Schottky 무델로 잘 설명되었다. Modified-Schottky 모델을 통해 BST 박막의 광학적 유전율 $\varepsilon$$\infty$=4.9, 이동도 $\mu$=0.019 cm2/V-s, 장벽 높이 $\psi$b=0.79 eV를 구하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.124-124
• /
• 2000

다이아몬드에 버금가는 높은 경도뿐만 아니라 높은 화학적 안정성 및 열전도성 등 우수한 물리화학적 특성을 가진 입방정 질화붕소(cubic boron nitride)는 마찰.마모, 전자, 광학 등의 여러 분야에서의 산업적 응용이 크게 기대되는 재료이다. 특히 탄화물형성원소에 대해 안정하여 철계금속의 가공을 위한 공구재료로의 응용 또한 크게 기대된다. 이 때문에 각종의 PVD, CVD 공정을 이용하여 c-BN 박막의 합성에 대한 연구가 광범위하게 진행되어 많은 성공사례들이 보고되고 있다. 그러나 c-BN 박막의 유용성에도 불구하고 아직 실제적인 응용이 이루어지지 못한 것은 c-BN 박막의 증착직후 급격한 박리현상 때문이다. 본 연구에서는 평행자기장을 부가한 ME-ARE(Magnetically Enhanced Activated Reactive Evaporation)법을 이용한 c-BN 박막의 합성에서 적용한 증착공정 인자들의 변화에 따른 박리특성 고찰과 함께 다층박막화 및 제 3원소 혼입 방법을 적용하여 박리특성 향상 정도를 조사하였다. BN 박막합성은 전자총에 의해 증발된 보론과 (질소+아르곤) 플라즈마의 활성화반응증착(Activated Reactive Evaporation)에 의해 이루어졌다. 기존의 ARE 장치와 달리 열음극(got cathode)과 양극(anode) 사이에 평행자기장을 부가하여 플라즈마의 증대시켜 반응효율을 높였다. 합성실험용 모재로는 p-type으로 도핑된 (100) Si웨이퍼를 30$\times$40mmzmrl로 절단 후, 10%로 희석된 완충불산용액에 10분간 침적하여 표면의 산화층을 제거한 후 사용하였다. 박막실험실에서의 주요공정변수는 기판바이어스 전압, discharge 전류, Ar/N2가스유량비이었다. 합성된 박막의 결정성 분석을 FTIR을 이용하였으며, BN 박막의상 및 미세구조관찰을 위해 투과전자현미경(TEM;Philips EM400T) 분석을 병행하였고, 박막의 기계적 물성 평가를 위해 미소경도를 측정하였다. 박리특성의 고찰은 대기중에서의 자발적 박리가 일어나 90%이상의 박리가 진행된 시점까지의 시간을 측정하였고, 증착직후 박막의 잔류응력 변화와 연관하여 고찰해 보았다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.2
• /
• pp.73-80
• /
• 2013

Due to the fact that possible risk associated with soil-crop-food chain transfer, metal contamination in croplands has become a major topic of wide concern. Accumulation of toxic metals in edible parts of crops grown in contaminated soils has been reported from number of crops including rice, soybean, wheat, maize, and vegetables. Therefore, in order to ensure food safety, measures are needed to be taken in mitigating metal pollution and subsequent uptake by crop plants. Present paper critically reviewed some of the cost effective remediation techniques used in minimizing metal uptake by crops grown in contaminated soils. Liming with different materials such as limestone ($CaCO_3$), burnt lime (CaO), slaked lime [$Ca(OH)_2$], dolomite [$CaMg(CO_3)_2$], and slag ($CaSiO_3$) has been widely used because they could elevate soil pH rendering metals less-bioavailable for plant uptake. Zn fertilization, use of organic amendments, crop rotation and water management are among the other techniques successfully employed in reducing metal uptake by crop plants. However, irrespectively the mitigating measure used, heterogeneous accumulation of metals in different crop species is often reported. The inconsistency might be attributed to the genetic makeup of the crops for selective uptake, their morphological characteristics, position of edible parts on the plants in respect of their distance from roots, crop management practices, the season and to the soil characteristics. However, a sound conclusion in this regard can only be made when more scientific evidence is available on case-specific researches, in particular from long-term field trials which included risks and benefits analysis also for various remediation practices.

• Radiation Oncology Journal
• /
• v.7 no.2
• /
• pp.227-233
• /
• 1989

From April 1986 to Dec 1988, fifty one patients with carcinoma of lung were treated by radiation therapy in Department of Therapeutic Radiology, Yeungnam University Hospital Of the 51 patients, $31(61\%)$ were squamous cell ca, $8(15.7\%)$ were small cell ca, and remained $4(7.9\%)$ were other cell types. Total radiation dose was average $64Gy (60\~75 Gy)$ for group A and 45Gy $(40\~59Gy)$ for group B. The mass regression and the response of airway obstruction to radiation therapy was established on the basis of follow up chest X-ray. The mass regression above $50\%$ of total volume was noted in 23 patients $(74.2\%)$ among 31 patients and the difference between two groups was not seen. In squamous cell ca, however, the mass regression rate (above $50\%$ of total volume) was $83.3\%$ (10/12) in group A compared to $50\%$ (3/6) in group B(p<0.05). The alleviation of airway obstruction was noted as follows. In group A, CR $42.9\%$, PR $35.7\%$, no response $21.4\%$ and in group B, CR $55.6\%,\;PR\;33.3\%$, no response $11.1\%$. But, in squamous cell ca, responsiveness is higher than group B. The study indicates that the importance of higher radiation dose in the management of primary tumor mass and airway obstruction caused by lung cancer especially squamous cell ca. So, meticulous treatment planning and multimodality combination therapy without increasing si.do elect or complication is recommended in management of inoperable bronchogenic carcinoma.