전 세계적으로 에너지원 다양화 및 온실가스 저감을 위한 다양한 신재생에너지 보급활성화 정책이 추진되고 있다. 국내에서도 500MW 이상의 발전설비를 보유한 발전사업자에게 신재생에너지 공급 의무화제도(Renewable Portfolio Standard(RPS))를 시행중이다. 발전사업자들은 의무공급량 이행을 위해 발전용 바이오중유를 사용하고 있다. 발전용 바이오중유란 동 식물성 유지, 지방산에스테르 및 그들의 혼합물로서 동점도, 유동점, 전산가 등의 품질특성을 만족해야 한다. 발전용 바이오중유는 원료물질에 의해 품질특성이 결정되었고, 중유와의 혼합비율이 증가할수록 유동점, 밀도, 황분 및 동점도는 감소하고 전산가, 요오드가, 산소함량은 증가하였다. 본 연구에서는 중유 대체연료로서의 발전용 바이오중유의 품질특성과 C 중유에 혼합 시, 혼합비율에 따른 물성 변화에 대해 검토하였다.
Kim, Seoyoung;Kim, Junhyung;Choi, Jaehoon;Jeong, Woonhyeok;Kwon, Sunyoung
Archives of Plastic Surgery
/
제44권6호
/
pp.482-489
/
2017
Background Polydeoxyribonucleotide (PDRN) is known to have anti-inflammatory and angiogenic effects and to accelerate wound healing. The aim of this study was to investigate whether PDRN could improve peripheral tissue oxygenation and angiogenesis in diabetic foot ulcers. Methods This was a prospective randomized controlled clinical trial. Twenty patients with a non-healing diabetic foot ulcer were randomly distributed into a control group (n=10) and a PDRN group (n=10). Initial surgical debridement and secondary surgical procedures such as a split-thickness skin graft, primary closure, or local flap were performed. Between the initial surgical debridement and secondary surgical procedures, 0.9% normal saline (3 mL) or PDRN was injected for 2 weeks by the intramuscular (1 ampule, 3 mL, 5.625 mg, 5 days per week) and perilesional routes (1 ampule, 3 mL, 5.625 mg, 2 days per week). Transcutaneous oxygen tension ($TcPO_2$) was evaluated using the Periflux System 5000 with $TcPO_2/CO_2$ unit 5040 before the injections and on days 1, 3, 7, 14, and 28 after the start of the injections. A pathologic review (hematoxylin and eosin stain) of the debrided specimens was conducted by a pathologist, and vessel density (average number of vessels per visual field) was calculated. Results Compared with the control group, the PDRN-treated group showed improvements in peripheral tissue oxygenation on day 7 (P<0.01), day 14 (P<0.001), and day 28 (P<0.001). The pathologic review of the specimens from the PDRN group showed increased angiogenesis and improved inflammation compared with the control group. No statistically significant difference was found between the control group and the PDRN group in terms of vessel density (P=0.094). Complete healing was achieved in every patient. Conclusions In this study, PDRN improved peripheral tissue oxygenation. Moreover, PDRN is thought to be effective in improving inflammation and angiogenesis in diabetic foot ulcers.
본 연구에서는 Ag-Cu합금 코팅에 의한 탄소나노튜브의 전계방출특성 변화를 연구하였다. 화학기상증착 방법을 사용하여 수직 성장시킨 탄소나노튜브에 직류 마그네트론 스퍼터를 이용하여 Ag-Cu합금을 증착하였고, 열처리 전 후의 탄소나노튜브의 표면형상 변화와 전계방출특성에 변화를 연구하였다. 연구결과 Ag-Cu합금 코팅으로 전계방출 문턱전압이 현저히 낮아졌으며 전류밀도는 $6V/{\mu}m$의 인가전압 하에서 약 5배 향상된 것을 확인하였다. 또한 Ag-Cu합금이 코팅된 탄소나노튜브는 산소가 많이 포함된 분위기에서도 안정적인 전계방출 특성을 보였으며, 이는 Ag-Cu합금 코팅이 분위기 진공에 상존하는 산소기체가 탄소나노튜브를 공격하는 것을 막아주는 역할을 하여 열악한 분위기에서도 전계방출이 안정적으로 발생하였기 때문인 것으로 생각된다.
In nitride and oxide film deposition, sputtered metals react with nitrogen or oxygen gas in a vacuum chamber to form metal nitride or oxide films on a substrate. The physical properties of sputtered films (metals, oxides, and nitrides) are strongly influenced by magnetron plasma density during the deposition process. Typical target power densities on the magnetron during the deposition process are ~ (5-30) W/cm2, which gives a relatively low plasma density. The main challenge in reactive sputtering is the ability to generate a stable, arc free discharge at high plasma densities. Arcs occur due to formation of an insulating layer on the target surface caused by the re-deposition effect. One current method of generating an arc free discharge is to use the commercially available Pinnacle Plus+ Pulsed DC plasma generator manufactured by Advanced Energy Inc. This plasma generator uses a positive voltage pulse between negative pulses to attract electrons and discharge the target surface, thus preventing arc formation. However, this method can only generate low density plasma and therefore cannot allow full control of film properties. Also, after long runs ~ (1-3) hours, depends on duty cycle the stability of the reactive process is reduced due to increased probability of arc formation. Between 1995 and 1999, a new way of magnetron sputtering called HIPIMS (highly ionized pulse impulse magnetron sputtering) was developed. The main idea of this approach is to apply short ${\sim}(50-100){\mu}s$ high power pulses with a target power densities during the pulse between ~ (1-3) kW/cm2. These high power pulses generate high-density magnetron plasma that can significantly improve and control film properties. From the beginning, HIPIMS method has been applied to reactive sputtering processes for deposition of conductive and nonconductive films. However, commercially available HIPIMS plasma generators have not been able to create a stable, arc-free discharge in most reactive magnetron sputtering processes. HIPIMS plasma generators have been successfully used in reactive sputtering of nitrides for hard coating applications and for Al2O3 films. But until now there has been no HIPIMS data presented on reactive sputtering in cluster tools for semiconductors and MEMs applications. In this presentation, a new method of generating an arc free discharge for reactive HIPIMS using the new Cyprium plasma generator from Zpulser LLC will be introduced. Data (or evidence) will be presented showing that arc formation in reactive HIPIMS can be controlled without applying a positive voltage pulse between high power pulses. Arc-free reactive HIPIMS processes for sputtering AlN, TiO2, TiN and Si3N4 on the Applied Materials ENDURA 200 mm cluster tool will be presented. A direct comparison of the properties of films sputtered with the Advanced Energy Pinnacle Plus + plasma generator and the Zpulser Cyprium plasma generator will be presented.
BACKGROUND: Castor oil and wormseed extract are important active ingredients for biopesticide, and ricinoleic acid in castor oil and three monoterpenes (ascaridole, carvacrol and p-cymene) in wormseed extract are known bioactive substances. However, their stabilities had not been studied, even though the stability was the core property for estimation of shelf-life of biopesticide. Aimed to investigate the thermal stabilities of the bioactive substances in castor oil and wormseed extracts. METHODS AND RESULTS: The contents of ricinoleic acid and three monoterpenes (ascaridole, carvacrol and p-cymene) were analyzed by gas chromatography (GC). The thermal stabilities of the bioactive substance were measured at $0^{\circ}C$, $23^{\circ}C$, $30^{\circ}C$, $40^{\circ}C$, $45^{\circ}C$ and $54^{\circ}C$ for 84 d. The half-lives of ricinoleic acid in biopesticides was ranged from 28.9 d to 57.8 d at $30^{\circ}C$, and the stability of pure castor oil were located in the range ($t_{1/2}$=46.2d for Indian product and 27.7 d for Korean product) at the same temperature. The half-lives of the total monoterpenes in biopesticides were ranged from 3.9 d to 27.7 d at $30^{\circ}C$. Among the monoterpenes, the stability ascaridole and p-cymene were decreased in acidic condition. All the bioactive substances showed similar stability on the different thermal conditions. CONCLUSION:The half-lives of most bioactive substance from castor oil and wormseed extracts were less than 100 d. To increase the stability of bioactive substance in biopesticide, stabilizing additives like antioxidant and oxygen remover should be considered to extend of the shelf-life.
양다래의 저장성 향상을 위해서 밀폐저장용기 내의 공기조성 중 산소농도를 2%로 고정하고 탄산가스 농도를 각각 2, 4% 그리고 6%로 조절한 CA조건에서 양다래를 저장하면서 과실의 품질에 관련된 이화학적 변화를 조사하였던 바 그 결과를 요약하면 다음과 같다. CA 저장 180일 경과 후 과실 품질의 가장 중요한 지표인 경도는 탄산가스 농도를 4%로 유지시켰던 구가 3.0kg으로 가장 우수한 연화 억제효과를 보였다. 탄산가스 농도에 따른 양다래의 호흡률 및 유기산 변화에서 저장 60일 이후부터는 탄산가스 농도를 6%로 유지시켰던 구가 2% 및 4% 유지구 보다 낮은 호흡률을 보였으며 유기산 중 퀴닌산과 숙신산의 경우 저장기간이 경과됨에 따라 저장구간에 뚜렷한 차이가 없이 증가하는 경향을 보였다. CA 저장구 중 이취의 원인이 되는 에틸알콜과 아세트알데히드 발생량은 탄산가스의 농도가 증가할수록 생성량이 많았다. 이상과 같은 결과로 한국산 양다래의 CA저장을 위해서는 산소농도 2%로 고정시 탄산가스 농토를 4%로 유지시키는 것이 적합한 것으로 판단되었다.
The ventilation in greenhouse have been important for such as adjustment of temperature, supplying of the oxygen, prevention of the overhumidity, density adjustment of $CO_2$, discharge of harmfulness gas, etc. However, the general ventilation which had been used the quantitative control method in discharge of a property of air mechanism in greenhouse, and caused mainly in waste of the heating energy and growth obstacle of the vegetable. Therefore, this study was peformed to obtain more scientific ventilation method using by analysis and measurement of the isothermal lines according to opening of window ventilation in greenhouse, and the results are summarized as follows. 1. The ventilating amount was more influenced by rather opening amount of window than the ventilating time. 2. In window ventilation, the temperature in greenhouse was mostly changed within 5 minutes after ventilating not regard to the spot of opening, after about 10 minutes temperature became to equilibrium state under the respective ventilating conditions. 3. In opening of the skylight only, isothermal lines were complicated, therefore, a tall vegetable may be possible to damage by a cold-weather from the lower central port in greenhouse. 4. Isothermal lines were a tendency to simply in opening of a side window that may be more effective ventilation in kinds of the short vegetable. 5. In conditions of internal temperature>setting temperature>external temperature, a skylight can be suitable to open 10~20cm in order to the optimum ventilation in greenhouse. 6. In conditions of internal temperature>external temperature>setting temperature, opening of all the windows or both the side windows that can be suitable in order to obtain the optimum ventilation in greenhouse. 7. An effect of ventilation was the most excellent to open of all the windows or both the side windows, and it were also found orderly excellent to open of the side window and the skylight or the skylight only, to open of the side window only. 8. Temperature was varied as the equation of T=Tc+ (To-Tc)e-at, and the ranges of (a) values were limited within 0.34~0.68. 9. A variations of humidity were similar to that of temperature, s.
본 총론은 주로 더운 여름에 집중 출하되고 있는 국내 참외에 대한 소비 판매 증대를 위한 품질개선을 위한 수확 후 관리 기술 및 포장재 적용 현황을 고찰하였다. 최근 재배 생산, 유통, 판매 측면에서 고품질 참외 상품화를 위한 수확 후 선별, 예냉, 저장, 유통, 포장 등 다양한 전처리 과정을 통한 과실 품질의 많은 향상을 보이고 있다. 참외 저장은 품종에 따라 다르겠지만 일반적으로 90-95% 상대습도에 7-$10^{\circ}C$ 온도의 저온 조건이 적당하며, 수확된 참외의 고품질 유지를 위하여 저온 장해를 받는 온도 조건에서 보관해서는 안 된다. 수확 후 에틸렌의 발생을 억제를 위한 1-MCP 처리, 활성물질을 가지는 기능성 포장재, 참외의 호흡률을 고려한 CA저장 및 MA 포장은 2-3% 산소 및 5-10% 이산화탄소 조건이 참외의 적정 저장 조건으로 볼 수 있다. 이러한 수확 후 관리 처리 기술의 적용 등은 참외 품질 유지와 저장 기간을 늘일 수 있을 것으로 기대되며, 특히 유통 및 저장에서 취급 중 발생할 수 있는 상품성 저하에 대해 효과적이며 안정적으로 적용할 수 있다. 현재 고품질 참외 제품에 대한 다양한 첨단 선도유지 처리 기술이 연구 진행되고 있지만 품종, 수확시기, 그리고 판매 환경조건 등을 고려한 연구가 필요하며, 국내 참외의 국제 경쟁력을 가지기 위하여 해외 제품과의 브랜드 차별화를 위한 전략적인 연구가 지속적으로 필요하다고 판단된다.
The process optimization of ozone concentration and half life time was investigated in ultra pure water and alkaline solutions for the wet cleaning of silicon wafer surface at room temperature. In the ultra pure water,. the maximum concentration (35 ppm) of ozone was measured at oxygen flow rate of 3 liters/min and ozone generator power over 60%. The half life time of ozone increased at lower power of ozone generator. Additive gases such as $N_2$ and $CO_2$ were added to increase the concentration and half life time of ozone. Although the maximum ozone concentration was higher with the addition of $N_2$ gas, a longer half life time was observed with the addition of $CO_2$. When $NH_4OH$ of 0.05 or 0.10 vol% was added in DI water, the pH of the solution was around 10. The addition of ozone resulted in the half life time less than 1 min. In order to maintain high pH and ozone concentration, ozone was continuously supplied in 0.05 vol% ammonia solutions. 3 ppm of ozone was dissolved in ammonia solutions. The static contact angle of silicon wafer surface became hydrophilic. The particle removal was possible alkaline ozone solutions. The organic contamination can be removed by ozonated ultra pure water and then alkaline solution containing ozone can remove the particles on silicon surface at room temperature.
고순도 삼염화실란(TCS) 중의 미량 인(P) 불순물 농도를 흡착 분리 방법을 이용하여 분광광도법적으로 측정하는 방법을 제안하였다. TCS 중의 미량 불순물인 P 염화물을 보다 안정한 $POCl_3$로 산화시킨 다음, ethanol 용매에 잘 녹으며$POCl_3$와 안정된 부가화합물 complex를 형성하는 물질로서$AlCl_3$를 선택하여 분리해 내었다. 이러한 흡착을 이용한 농축 분리 방법을 통해 분석 도중에 실리카 겔 및 기포의 생성을 방지할 수 있었는데, 반도체급 TCS 중의 P 농도는 ${\pm}$ 17% 표준편차 범위내에서 5.32${\mi}g/l$로 측정되었다. 이와같이 $AlCl_3$로 P 화합물을 제거시킨 정제된 TCS 중의 P 농도는 0.15${\mi}g/l$이하로 측정되어 $AlCl_3$의 우수한 흡착 성능이 습식분석에 효과적으로 이용될 수 있음을 확인할 수 있다. 또한 TCS 정제 중 P 불순물 제거에 효과적인 것으로 알려진 다른 흡착 물질의 성능도 본 측정 방법으로 비교 분석하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.