• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.1
• /
• pp.88-94
• /
• 2012

One of the effective ways to reduce both $NO_x$ and PM at the same time in a diesel CI engine is to operate the engine in low temperature combustion (LTC) regimes. In general, two strategies are used to realize the LTC operation-dilution controlled LTC and late injection LTC - and in this study, the former approach was used. In the dilution controlled regime, LTC is achieved by supplying a large amount of EGR to the cylinder. The significant EGR gas increases the heat capacity of in-cylinder charge mixture while decreasing oxygen concentration of the charge, activating low temperature oxidation reaction and lowering PM and $NO_x$ emissions. However, use of high EGR levels also deteriorates combustion efficiency and engine power output. Therefore, it is widely considered to use increased intake pressure as a way to resolve this issue. In this study, the effects of intake pressure variations on performance and emission characteristics of a single cylinder diesel engine operated in LTC regimes were examined. LTC operation was achieved in less than 8% $O_2$ concentration and thus a simultaneous reduction of both PM and $NO_x$ emission was confirmed. As intake pressure increased, combustion efficiency was improved so that THC and CO emissions were decreased. A shift of the peak Soot location was also observed to lower $O_2$ concentration while $NO_x$ levels were kept nearly zero. In addition, an elevation of intake pressure enhanced engine power output as well as indicated thermal efficiency in LTC regimes. All these results suggested that LTC operation range can be extended and emissions can be further reduced by adjusting intake pressure.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.272-277
• /
• 1998

In order to study storage stability of fresh jujube fruits (Zizyphus jujuba Miller) controlled atmosphere storage, polyethylene film packaging and non-packaging were compared. Jujube fruits were stored on the following gas compositions: 1.5% carbon dioxide and 5, 8, 10, 12% oxygen at $7^{\circ}C$, respectively. And 0.05 mm PE packaging and non-packaging were stored at $1^{\circ}C,\;4^{\circ}C\;and\;7^{\circ}C$. Safe storage period of Bokjo jujube fruits was four weeks when stored in CA condition of $O_2\;10%\;and\;CO_2\;1.5%$ in terms of their overall quality. The rate of weight loss was not much changed either by storage method of CA or by PE film packaging. In surface color the a value of jujube fruits increased but L and b values decreased during the storage period. Hardness showed the trend of increase in all the treatment for 2 weeks of storage while in CA it decreased more than the others after 4 weeks of storage. Soluble solids and titratable acidity were changed slightly. Vitamin C contents were gradually decreased in all treatments, but non-packed jujubes at $1^{\circ}C$ were slightly increased.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.5
• /
• pp.562-570
• /
• 2008

Most purulent maxillofacial infections are of odontogenic origin. Treatment of infection includes the surgical intervention, such as incision and drainage, and adjunctive treatment. The use of high-dose antibiotics is also indicated. The choice of an antibiotics should be based on the knowledge of the usual causative microbes and the results of antibacterial sensitivity test. We have undertaken clinical studies on 119 patients in Dept. of Oral and Maxillofacial Surgery, Inha University Hospital from January 2000 to December 2007. Many anaerobic microbes are killed quickly when exposed to oxygen. Thus the needle aspiration techniques and the transfer under inert gas were used when culturing. The aim of this study was to obtain informations for the bacteriologic features and the effective antimicrobial therapy against maxillofaical odontogenic infections. The obtained results were as follows: 1. The most frequent causes of infections were odontogenic (88.3%), and in odontogenic cause, pulpal infections were the most common causes(53.8%). 2. The buccal and submandibular spaces (respectively 23.5%) were the most frequent involved fascial spaces, followed by masticator spaces (14.3%). 3. The most common underlying medical problems were diabetes (17.6%), however the relation with prognosis was not discovered. 4. The complications were the expiry, mediastinitis, necrotizing fasciitis, orbital abscess, and osteomyelitis. 5. The most common admission periods were 1-2 weeks, and the most patients were discharged within 3 weeks. However, patients who admitted over 5 weeks were about 10%. 6. A total of 99 bacterial strains (1.1 strains per abscess) was isolated from 93 patients (78.2%). The most common bacterium isolated was Streptococcus viridans (46.2%), followed by $\beta$-hemolytic group streptococcus (10.1%). 7. Penicillins (penicillin G 58.3%, oxacillin 80.0%, ampicillin 80.0%) have slightly lower sensitivity. Thus we recommend the antibiotics, such as glycopeptides (teicoplanin 100%, vancomycin 100%) and quinolones (ciprofloxacin 90.0%) which have high susceptibility in cases in which peni cillin therapy failed or severe infections.

• Journal of the Korean Vacuum Society
• /
• v.18 no.6
• /
• pp.440-446
• /
• 2009

Indium tin oxide(ITO) substrate is one of the key components of the touch panel and its sputtering process is dependent on the characteristics of various touch panel, such as driving type, size of panel, and the intended use. In this study, we optimized the sputtering condition of ITO film on polycarbonate(PC) by using in-line sputtering method for the application to resistive type touch panel. We varied the $O_2$/Ar gas ratio, sputtering power, pressure and moving speed of substrate to deposit ITO films at room temperature with the base vacuum of $1{\times}10^{-6}\;torr$. The sheet resistance and its uniformity, the transmittance, the thickness of the ITO film on PC substrate are investigated and analyzed. The optimized process parameters are as follows : the sheet resistance is $500{\pm}50\;{\Omega}$/□, the uniformity of sheet resistance is lower than 10%, the transmittance is higher than 87 % at 550nm, and the thickness is about 120~250. The optimized deposition conditions by in-line sputtering method can be applied to the actual mass production for the ITO film manufacturing technology.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.6
• /
• pp.621-627
• /
• 2008

In this study, a technique of speciation and determination of the trace inorganic arsenic(As(III) and As(V)) in water sample using HPLC-DRC-ICP-MS has been developed. Isocratic mobile phase of 10 mM ammonium nitrate and 10 mM ammonium phosphate monobasic was used and methanol(5 v/v%) was used as flushing solvent. Selection of the best flow rate of reaction gas, O$_2$, and optimization of the parameters such as pH and flow rate of mobile phase, and injection volume of sample for the separation and detection of arsenic species were carried out. The oxygen flow rate of 0.5 mL/min, pH of 9.4 and flow rate of 1.5 mL/min of mobile phase, and injection volume of sample of 100 $\mu$L were found to be the best parameters for the speciation and determination of arsenic species. The analytical features of the method were detection limit 0.10 and 0.08 $\mu$g/L, precision(RSD) 4.3% and 3.6%, and recovery 95.2% and 96.4% for As(III) and As(V), respectively. Analysis time was 4 minutes per sample. Linear calibration graphs with r$^2$ = 0.998 were obtained for both As(III) and As(V). Speciation analysis of arsenic species in the raw water samples collected from the tributary streams to Han River and main stream of Paldnag were performed by the proposed method. The concentrations of As(III) ranged from 0.10 to 0.22 $\mu$g/L and As(V) concentrations ranged from 0.44 to 1.19 $\mu$g/L, and 93.5% of total arsenic was found to be As(V).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.2
• /
• pp.93-97
• /
• 2000

This study was carried out to investigate the effect of rotifer fed the different diets in high density culture on larval flounder Paralichthys olivaceus. Potifer was enriched with enrichment supplements, Marine ${\alpha}\;and\;{\omega}-yeast$ for 6 hours after being cultured with freshwater Chlorella for 18 hours during high density culture before it was fed to larval flounder. And rotifer was culutured with marine Chlorella and freshwater Chlorella for 24 hours during semi-continuous high density culture before it was fed to larval flounder. Culture tanks(21 working volum) set for rotifer culture in a water bath($28{\circ}C$) were continuously supplied with oxygen gas. The content of n-3 HUFA to fatty acids in rotifer(dry weight ${\%}$) enriched with Marine ${\alpha}$ for 6 hours and cultures with marine Chlorella for 24 hours were higher than that in rotifer enriched with ${\omega}-yeast$ for 6 hours or cultured with freshwater Chlorella for 24 hours. The growth and survival rates of larval flounder fed on rotifer enriched with Marine ${\alpha}$ for 6 hours and cultured with marine Chlorella for 24 hours were higher than those of larval flounder fed on rotifer enriched with ${\omega}-yeast$ for 6 hours or cultured with freshwater Chlorella for 24 hours. And the content of n-3 HUFA of larval flounder fed on rotifer enriched with Marine ${\alpha}$ for 6 hours was higher than that of larval flounder fed on other rotifers, The results from this study indicated that rotifer culture with marine Chiorelia would be suitable for the high density culture and effective diet for the growth of larval flounder.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.5
• /
• pp.436-445
• /
• 1986

As the second part of the studies on the utilization of polyunsaturated lipids in sardine oil as nutritional or medical supplement, the conditions of lipid extration and concentration, refining, and storage stability of EPA-condensed sardine oil were investigated. In extraction of lipids, solvent ratios of chloroform-methanol mixture(2:1 v/v) affected the final content of unsaturated lipid in extracted oil and recovery. Stepwise solvent fractionation method at various low temperatures was effective to concentrate polyenoic acids like EPA and DHA when acetone or acetone-methanol mixture, added in the ratio of 1:5 (v/v) was applied step by step to different temperatures at 0 to $-35^{\circ}C$. Addition of 1 to $5\%$ (v/v) of water to acetone was also benefit to raise EPA content but that resulted in reducing the yield of condensed oil from $65\%\;to\;28\%$. Concentration rate of polyenoic acids by solvent fractionation in lipid-actone solution (1:5, v/v) at 0 to $-30^{\circ}C$ seemed limited to $5{\sim}8\%$ in fatty acid composition depending on the initial content of those polyenoic acids in the sardine oil. During the extraction, concentration, and alkaline treatment, oxidation was rapidly induced but oxidation products could be thoroughly removed on the process of deceleration and peroxide elimination. To stabilize the reactive polyenoic acid condensed oil during the storage, stuffing nitrogen gas was essential to expel dissolved oxygen in oil or to seal the oil from open air, and the addition of antioxidative agents as BHA and tocopherols were greatly helpful to extend the storage life.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.4
• /
• pp.63-68
• /
• 2010

Utility-Pipe Conduit is, Housing and city effectively accommodate what they absolutely need power, communications, gas, pipeline, water supply, drainage, energy facilities etc, according to expansion of urban infrastructure are derived, several ways to solve problems in, collection facilities in place are maintained and managed facility. If Utility-Pipe Conduit is damaged, as well as national security, because their impact on society as a whole, by introducing large vulnerability in the fire prevention activities and suppression measures and disaster for our situation by introducing measures, comprehensive analysis of the fire risk, it shall establish fire prevention activities and suppression through analysis of Utility-Pipe Conduit design, institutional issues, the problem of fire protection facilities, fire spread phenomenon etc. Because of Utility-Pipe Conduit is an enclosed place, so incomplete combustion due to lack of oxygen supply that there are problem such dark smoke, carbon monoxide etc, toxic combustion products and heat generation and visual impairment is an issue difficult to enter. As well as fire prevention activities, the fire In light of the particularity of the under ground than above ground fire, so this phenomenon is weak fire fighting that fire to become effective fire fighting tactics, basically it is necessary difficulty softening, non-burn softening and prevent combustion expansion of the cable is installed on the Utility-Pipe Conduit, having to considering the specificity of the response command system and relevant organizations to establish an on-site, Structural identification and other information gathering required to record of Response agencies, keep air conditioning system 24 hours and strengthening Virtual Total Training of Response agen

• Elastomers and Composites
• /
• v.46 no.2
• /
• pp.164-170
• /
• 2011

In this study, silicone rubber filled with environmentally-friendly perlite was prepared by mechanical mixing in order to improve thermal properties, such as heat and fire resistances. We found that the properties of silicone rubber composites depended on perlite concentration by various characterization methods. Thermogravimetric analysis(TGA) indicated that the initial degradation temperature of silicone/perlite composite was higher than that of pristine silicone rubber. The gas torch test showed that the opposite side temperature of composite materials was remarkably low as compared to that of pristine silicone rubber. In addition, the composites containing 5 wt% and 10 wt% of perlite showed remarkable thermal stability at elevated temperatures according to the results of both fireproof furnace tests under the RABT condition and carbonization furnace tests. The images from a scanning electron microscope(SEM) showed the degree of dispersion of perlite in silicone rubber. Finally, it was confirmed that limited oxygen index(LOI) was increased with perlite concentration.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.357-363
• /
• 2012

Surface-modified poly(L-lactic acid) (PLLA) films and scaffolds were treated with plasma discharge in oxygen gas and subsequently subjected to $in$ $situ$ grafting of acrylic acid (AA) in order to increase the cell compatibility. The surface of AA-grafted PLLA was converted to hydroxyapatite (HA)-deposited PLLA in stimulated body fluid (SBF). After the samples were immersed in phosphate-buffered saline (PBS), fetal bovine serum (FBS), normal saline, or cell medium, the water contact angles were significantly reduced on the surface of HA-deposited PLLA. Chondrocyte and osteoblast showed a higher attachment and cell proliferation on HA-deposited surfaces and in particular, it was confirmed that chondrocyte was considerably influenced by HA. However, osteoblast showed better cell proliferation on the surfaces immersed in FBS, cell medium or HA-deposited surface. In addition, the cell proliferation in 3D scaffolds was much higher than that on film type, irrespective of chondrocyte and osteoblast. Therefore, such surface-modified PLLAs are expected to be useful as organic-inorganic hybrid scaffolds in the regeneration of cartilage and bone.