• 센서학회지
• /
• 제15권3호
• /
• pp.216-221
• /
• 2006

ZnO thin films prepared by PLD method exhibit an excellent optical property, but may have some problems such as incomplete surface roughness and crystallinity. In this study, undoped ZnO buffer layers were deposited on (0001) sapphire substrates by ultra high vacuum pulse laser deposition (UHV-PLD) and molecular beam epitaxy (MBE) methods, respectively. After post annealing of ZnO buffer layer, undoped ZnO thin films were deposited under different oxygen pressure ($35{\sim}350$ mtorr) conditions. The Arsenic-doped (1, 3 wt%) ZnO thin layers were deposited on the buffer layer of undoped ZnO by UHV-PLD method. The optical property of the ZnO thin films was analyzed by photoluminescence (PL) measurement. The ${\theta}-2{\theta}$ XRD analysis exhibited a strong (002)-peak, which indicates c-axis preferred orientation. Field emission-scanning electron microscope (FE-SEM) revealed that microstructures of the ZnO thin films were varied by oxygen partial pressure, Arsenic doping concentration, and deposition method of the undoped ZnO buffer layer. The denser and smoother films were obtained when employing MBE-buffer layer under lower oxygen partial pressure. It was also found that higher Arsenic concentration gave the enhanced growing of columnar structure of the ZnO thin films.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.286-287
• /
• 2012

Reset-first resistive switching mechanism based on reduction reaction in HfO2-x with oxygen drift-diffusion was studied. we first report that the indirect evidence of local filamentary conductive path formation in bulk HfO2 film with local TiOx region at Ti top electrode formed during forming process and presence of anion-migration at interface between electrode and HfO2 during resistive switching through high resolution transmission electron microscopy (HRTEM), electron disperse x-ray (EDX), and electron energy loss spectroscopy (EELS) mapping. Based on forming process mechanism, we expected that redox reaction from Ti/HfO2 to TiOx/HfO2-x was responsible for an increase of initial current with increasing the post-annealing process. First-reset resistive switching in above $350^{\circ}C$ annealed Ti/HfO2 film was exhibited and the redox phenomenon from Ti/HfO2 to TiOx/HfO2-x was observed with high angle annular dark field (HAADF) - scanning transmission electron microscopy (STEM), EDX and x-ray photoelectron spectroscopy. Therefore, we demonstrated that the migration of oxygen ions at interface region under external electrical bias contributed to bipolar resistive switching behavior.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.207-210
• /
• 2005

In order to investigate the influence of the homo buffer layer on the microstructure of the ZnO thin film, undoped ZnO buffer layer were deposited on sapphire (0001) substrates by ultra high vaccum pulsed laser deposition (UHV-PLD) and molecular beam eiptaxy (MBE). After high temperature annealing at $600^{\circ}C$ for 30min, undoped ZnO buffer layer was deposited with various oxygen pressure (35~350mtorr). On the grown layer of undoped ZnO, Arsenic-doped(l, 3wt%) ZnO layers were deposited by UHV-PLD. The optical property of the ZnO was analyzed by the photoluminescence (PL) measurement. From $\Theta-2\Theta$ XRD analysis, all the films showed strong (0002) diffraction peak, and this indicates that the grains grew uniformly with the c-axis perpendicular to the substrate surface. Field emission scanning electron microscope (FE-SEM) revealed that microstructures of the ZnO were varied with oxygen pressure, arsenic doping level, and the deposition method of undoped ZnO buffer layers. The films became denser and smoother in the cases of introducing MBE-buffer layer and lower oxygen pressure during As-doped ZnO deposition. Higher As-doping concentration enhanced the columnar-character of the films.

• Journal of Korean Vacuum Science & Technology
• /
• 제2권2호
• /
• pp.63-77
• /
• 1998

The oxidation of NiAl(110) was investigated in the temperature regime between 300K and 1300 K using LEED (low energy electron diffraction), TPD (temperature programmed desorption) and HREELS (high resolution electron energy loss spectroscopy). The adsorption of N2O and O2 up to reconstructions. Stepwise annealing of the oxygen-saturated sample from 600 K to 1300K in UHV (ultra-high vacuum,) results in firstly the onset of randomly oriented then finally fairly well-ordered. 5 ${\AA}$ Al2O3 film with quasi-hexagonal periodicity. Ordered thicker oxide films of 18-30 ${\AA}$ seem to be grown on this interfacial oxide layer by direct oxidation of sample at elevated temperature between 1150 and 1300 K because of the LEED pattern consisting of new broad hexagonal spots and the previous 5 ${\AA}$ spots. Although the periodicity of surface oxygen arrays shows no significant change from an hexagonal close-packing, the O-O distance changes from ∼3.0 ${\AA}$ film to ∼2.9 ${\AA}$ for thicker oxides. with the appearance of Auger parameter, for the 5${\AA}$ film can be described better as an interfacial oxide layer. The observation of three symmetric phonon peaks can be also a supporting evidence for this phase assignment since thicker oxide films on the Same Ni2Al3(110) show somewhat different phonon structure much closer to that of the ${\gamma}$-Al2O3. The adsorption/desorption of methanol further proves the preparation of less-defective and/or oxygen-terminated Al2O3 films showing ordered phase transitions with the change of oxide thickness between 5 ${\AA}$ to 30 ${\AA}$.

• 새물리
• /
• 제68권11호
• /
• pp.1203-1207
• /
• 2018

본 연구에서는 산소 함유량이 다른 산화 실리콘 막을 사용하여 실리카 나노 와이어를 형성하고, 실리카 나노 와이어의 미세구조 및 물리적 특성을 Si 웨이퍼를 사용하여 형성된 실리카 나노 와이어와 비교 분석하였다. 산화 실리콘 막은 플라즈마 화학 기상 증착 방법을 사용하여 제조하였으며, 실리카 나노 와이어는 산화 실리콘 막 표면에 촉매 물질로 니켈 막을 진공 증착한 후 열처리를 통해 형성하였다. 산소 함유량이 약 50 at.% 이하의 산화 실리콘 막의 경우 나노 와이어 형성 메커니즘, 미세구조 및 물리적 특성 등에서 실리콘 웨이퍼의 경우와 거의 차이점이 없었으며, 특히 나노 와이어의 굵기의 균일성은 산화 실리콘 막에서 더 우수한 거동을 나타내었다. 이러한 결과는 저가로 양질의 실리카 나노 와이어를 제조하는 대체재로서 산화 실리콘 막의 유용성을 제시한다.

• 마이크로전자및패키징학회지
• /
• 제27권4호
• /
• pp.19-24
• /
• 2020

열처리 공정을 이용하여 Si 도핑된 n형 β-Ga2O3의 전기적 특성을 변화시킨 후 전도도 변화 메커니즘에 대한 분석을 진행하였다. β-Ga2O3 시편들은 공기 또는 N2 분위기에서 800℃~1,200℃ 온도범위 내에서 30분 동안 열처리되었다. 우선 열처리로 인한 결정성 개선은 전기 전도도에 영향을 미치지 않음을 확인하였다. 하지만 공기중 열처리된 시편은 전도성이 악화된 반면 N2 열처리된 시편은 Hall 캐리어 농도와 이동도가 일부 개선되는 경향성을 보였다. X-ray photoemission spectroscopy(XPS)분석 결과, 산소공공(VO)의 농도는 가스 분위기에 상관없이 모든 열처리된 시편에서 증가하는 경향성을 보였다. 공기중 열처리된 시편에서의 VO 농도 증가는 β-Ga2O3내 VO가 Shallow donor가 아님을 보여주는 결과로 볼 수 있다. 그러므로 N2 열처리된 시편은 VO가 아닌 다른 메커니즘에 의해서 전도도가 향상되었을 가능성이 높다. Si의 경우 SiOx 결합상태를 보이는 Si의 농도가 열처리 온도 증가에 따라 증가하는 경향성을 보였다. 특이하게도 SiOx의 Si 2p peak의 면적 증가는 기존 Si의 화학적 변화 보다는 XPS 측정 영역내 Si농도 증가로 보였으며, SiOx와 전기전도도와의 상관성은 확인할 수 없었다. 결론적으로 본 연구를 통해 기존 보고된 실험결과와 달리 VO가 Deep donor임을 확인하였다. 이와 같은 β-Ga2O3 전도성의 결함 및 불순물 의존도에 대한 연구는 β-Ga2O3의 전기적 특성의 근본적인 이해를 바탕으로 물성 개선에 기여할 것으로 본다.

• 한국재료학회지
• /
• 제5권7호
• /
• pp.850-857
• /
• 1995

반응성 전자빔 증착 방법으로 여러 산소압력 하에서 VO$_x$ 및 V$_{1-x}$ Sn$_{x}$O$_2$박막을 유리 위에 코팅하였다. Thermochromism과 천이온도는 spectrophotometer를 이용하여 여러 온도에서 파장에 따른 광투과율을 측정하여 조사하였다. 화학양론비를 RBS로 조사한 결과 산소 압력이 5$\times$$10^{-5}$ Torr 일때 가장 뚜렷한 thermochromic 효과를 나타내는 완전에 가까운 화학양론비를 갖는 VO$_2$박막을 제작할 수 있었다. 그리고 박막의 결정화를 위하여 rapid thermal annealing (RTA) 방법을 적웅한 결과 공기중에서 40$0^{\circ}C$~45$0^{\circ}C$에서 20~30초간의 어닐링 하였을 때가 두께 100~300nm의 박막을 결정화시키는데 최적조건으로 발견되었다. 또한, Sn을 VO$_2$에 1%~6% 첨가한 V$_{1-x}$ Sn$_{x}$O$_2$박막의 써모크로미즘 및 천이온도를 spectrophotometer로 근적외선의 투과율을 측정하여 조사한 결과 뚜렷한 thermochromism은 그대로 유지되었고 V$_{1-x}$ Sn$_{x}$O$_2$, 박막의 천이온도는 VO$_2$박막의 천이온도 보다 높게 나타났다.

• 한국전기전자재료학회논문지
• /
• 제17권11호
• /
• pp.1178-1185
• /
• 2004

In the atmosphere of $N_2$ gas, BaZ $r_{0.08}$ $Ti_{0.92}$ $O_3$ polycrystal was grown by floating zone technique using BaZ $r_{0.08}$ $Ti_{0.92}$ $O_3$ ceramics as a feed and SrTi $O_3$(1l0) single cystal as a seed. The dielectric constant and loss at 10 kHz, 100 kHz, and 1 MHz for the as-grown sample were measured as a function of temperature in the temperature range between -10$0^{\circ}C$ and 150 $^{\circ}C$ to find a dielectric peak with frequency dispersion at Curie point. The hysteresis loop showed that the grown sample had very small polarization which was 0-0.01 $\mu$C/$\textrm{cm}^2$ for the applied dc-electric fields from -7 kV/cm to +7 kV/cm. However, the normal hysteresis loop was appeared after oxygen annealing. The electric-field dependence of the dielectric constant for both the as-grown and the post-annealed samples was studied by measuring the dielectric constants as a function of the biased-electric fields and their tunability was figured out from it at room temperature(27 $^{\circ}C$) and cryotemperature( -73$^{\circ}C$). Tunability for the as-grown sample was 51 % and the figure of merit 20.4 at 10kHz with the biased electric-field of 12 kV/cm. The tunability for the grown sample may be increased up to 80 % if the electric field of 25 kV/cm is applied. Tunability for the post-annealed sample was 41 % and the figure of merit 10.3 at 10 kHz with the biased electric-field of 12 kV /cm. Post-annealing improved the crystallinity of the as-grown sample but decreased its tunability.ability.

• Current Photovoltaic Research
• /
• 제9권3호
• /
• pp.75-83
• /
• 2021

The tunnel oxide passivated contact (TOPCon) structure got more consideration for development of high performance solar cells by the introduction of a tunnel oxide layer between the substrate and poly-Si is best for attaining interface passivation. The quality of passivation of the tunnel oxide layer clearly depends on the bond of SiO in the tunnel oxide layer, which is affected by the subsequent annealing and the tunnel oxide layer was formed in the suboxide region (SiO, Si₂O, Si₂O₃) at the interface with the substrate. In the suboxide region, an oxygen-rich bond is formed as a result of subsequent annealing that also improves the quality of passivation. To control the surface morphology, annealing profile, and acceleration rate, an oxide tunnel junction structure with a passivation characteristic of 700 mV or more (V_oc) on a p-type wafer could achieved. The quality of passivation of samples subjected to RTP annealing at temperatures above 900℃ declined rapidly. To improve the quality of passivation of the tunnel oxide layer, the physical properties and thermal stability of the thin layer must be considered. TOPCon silicon solar cell has a boron diffused front emitter, a tunnel-SiO_x/n⁺-poly-Si/SiN_x:H structure at the rear side, and screen-printed electrodes on both sides. The saturation currents J_o of this structure on polished surface is 1.3 fA/cm² and for textured silicon surfaces is 3.7 fA/cm² before printing the silver contacts. After printing the Ag contacts, the J_o of this structure increases to 50.7 fA/cm² on textured silicon surfaces, which is still manageably less for metal contacts. This structure was applied to TOPCon solar cells, resulting in a median efficiency of 23.91%, and a highest efficiency of 24.58%, independently. The conversion efficiency of interdigitated back-contact solar cells has reached up to 26% by enhancing the optoelectrical properties for both-sides-contacted of the cells.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1508-1510
• /
• 1999

스퍼터 퇴적 $WO_3$ 박막에 대해 열처리에 따른 전기적특성 및 구조적특성을 각각 4탐침법 및 AFM 관측에 의해 조사해 보고, 또한 스퍼터링시의 산소가스 유량비에 따른 $WO_3$ 박막의 막질을 ESCA에 의해 평가하였다 실험 결과 열처리에 의해 $WO_3$ 박막 표면의 평균거칠기가 $2.45\AA$에서 $152\AA$으로 크게 증가함을 알 수 있었다 또한 스퍼터시 산소유량비에 따른 효과를 ESCA로 관측한 결과, 열처리전에는 주피크가 34eV에서 나타남에 비해 열처리 후에는 36eV전후에서 나타났다.