• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.10
• /
• pp.822-827
• /
• 2000

The Si-SiO$_2$interface trap and nitride bulk trap distribution of SONOSFET(polysilicon-oxide-nitride-oxide-semiconductor field effect transistor) NVSM (nonvolatile semiconductor memory) cell is investigated by single junction charge pumping method. The device was fabricated by 0.35㎛ standard logic fabrication process including the ONO stack dielectrics. The thickness of ONO dielectricis are 24$\AA$ for tunnel oxide, 74 $\AA$ for nitride and 25 $\AA$ for blocking oxide, respectively. By the use of single junction charge pumping method, the lateral profiles of both interface and memory traps can be calculated directly from experimental charge pumping results without complex numerical simulation. The interface traps were almost uniformly distributed over the whole channel region and its maximum value was 7.97$\times$10$\^$10/㎠. The memory traps were uniformly distributed in the nitride layer and its maximum value was 1.04$\times$10$\^$19/㎤. The degradation characteristics of SONOSFET with write/erase cycling also were investigated.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.8
• /
• pp.1235-1238
• /
• 2006

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.3
• /
• pp.65-71
• /
• 1999

The effects of mask materials and etching solutions on the dimensional accuracy of V-groove were studied for the alignment between optoelectronic devices and optical fibers in optical packaging. PECVD nitride, LPCVD nitride, or thermal oxide($SiO_2$) was used as a mask material. The anisotropic etching solution was KOH(40wt%) or the mixture of KOH and IPA. LPCVB nitride has the best etching selectivity and thermal oxide was etched most rapidly in KOH(40wt%) at $85^{\circ}C$ among the mask materials studied here. The V-groove size enlarged than the designed value. This phenomenon was due to the undercutting benearth the mask layer from the etching toward Si (111) plane. The etch rate of (111) plane wart 0.034 - 0.037 $\mu\textrm{m}$/min in KOH(40wt%). This rate was almost same regardless of mask materials. When IPA added to KOH(40wt%), the etch rate of (100) plane and (111) plane decreased, but etching ratio of (100) to (111) plane increased. Consequently, the undercutting phenomenon due to etching toward (111) plane decreased and the size of V-groove could be controlled more accurately.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.2
• /
• pp.269-275
• /
• 2003

Polysilicon-oxide-nitride-oxide-silicon(SONOS) transistors were fabricated by using 0.35${\mu}{\textrm}{m}$ complementary metal-oxide-semiconductor(CMOS) process technology to realize a low voltage programmable flash memory. The thickness of the tunnel oxide, the nitride, and the blocking oxide were 2.4nm, 4.0nm, and 2.5nm, respectively, and the cell area of the SONOS memory was 1.32$\mu$$m^2$. The SONOS device revealed a maximum memory window of 1.76V with a switching time of 50ms at 10V programming, as a result of the scaling effect of the nitride. In spite of scaling of nitride thickness, memory window of 0.5V was maintained at the end of 10 years, and the endurance level was at least 105 program/erase cycles. Over-erase, which was shown seriously in floating gate device, was not shown in SONOS device.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.604-607
• /
• 2008

In this study, p-channel silicon-oxide-nitride-oxide-silicon (SONOS) transistors are fabricated and characterized as an unit cell for NAND flash memory. The SONOS transistors are fabricated by $0.13{\mu}m$ low power standard logic process technology. The thicknesses of gate insulators are $20{\AA}$ for the tunnel oxide, $14{\AA}$ for the nitride layer, and $49{\AA}$ for the blocking oxide. The fabricated SONGS transistors show low programming voltage, fast erase speed, and relatively good retention and endurance.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.4
• /
• pp.449-457
• /
• 2012

The program/erase (P/E) cyclic endurances including bias temperature instability (BTI) behaviors of Metal-$Al_2O_3$-Nitride-Oxide-Semiconductor (MANOS) memories are investigated in comparison with those of Semiconductor-Oxide-Nitride-Oxide-Semiconductor (SONOS) memories. In terms of BTI behaviors, the SONOS power-law exponent n is ~0.3 independent of the P/E cycle and the temperature in the case of programmed cell, and 0.36~0.66 sensitive to the temperature in case of erased cell. Physical mechanisms are observed with thermally activated $h^*$ diffusion-induced Si/$SiO_2$ interface trap ($N_{IT}$) curing and Poole-Frenkel emission of holes trapped in border trap in the bottom oxide ($N_{OT}$). In terms of the BTI behavior in MANOS memory cells, the power-law exponent is n=0.4~0.9 in the programmed cell and n=0.65~1.2 in the erased cell, which means that the power law is strong function of the number of P/E cycles, not of the temperature. Related mechanism is can be explained by the competition between the cycle-induced degradation of P/E efficiency and the temperature-controlled $h^*$ diffusion followed by $N_{IT}$ passivation.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.11a
• /
• pp.84-93
• /
• 1999

Sliding friction and wear tests for silicon nitride(Si$_3$N$_4$) was carried out with a ball-on-disk specimen configuration. The material used in this study was HIPed silicon nitride. The tests was carried out from room temperature to 1000"I with self mated couples of slicon nitride in laboratory air. Worn surfaces were observed by SEM and debris particles from worn surfaces were analyzed degree of oxidation by XPS. XPS.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.5
• /
• pp.250-253
• /
• 2013

In this paper, we fabricated 3D pillar type silicon-oxide-nitride-oxide-silicon (SONOS) devices for high density flash applications. To solve the limitation between erase speed and data retention of the conventional SONOS devices, bandgap-engineered (BE) tunneling oxide of oxide-nitride-oxide configuration is integrated with the 3D structure. In addition, the tunneling oxide is modulated by another method of $N_2$ ion implantation ($N_2$ I/I). The measured data shows that the BE-SONOS device has better electrical characteristics, such as a lower threshold voltage ($V_{\tau}$) of 0.13 V, and a higher $g_{m.max}$ of 18.6 ${\mu}A/V$ and mobility of 27.02 $cm^2/Vs$ than the conventional and $N_2$ I/I SONOS devices. Memory characteristics show that the modulated tunneling oxide devices have fast erase speed. Among the devices, the BE-SONOS device has faster program/erase (P/E) speed, and more stable endurance characteristics, than conventional and $N_2$ I/I devices. From the flicker noise analysis, however, the BE-SONOS device seems to have more interface traps between the tunneling oxide and silicon substrate, which should be considered in designing the process conditions. Finally, 3D structures, such as the pillar type BE-SONOS device, are more suitable for next generation memory devices than other modulated tunneling oxide devices.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1327-1329
• /
• 1998

It is very important to select superior inter-layer PMD(Pre Metal Dielectric) materials which can act as penetration barrier to various impurities created by CMP processes. In this paper, hot carrier degradation and device characteristics were studied with material variation of PMD-1 layers, which were split by LP-TEOS, SR-Oxide, PE-Oxynitride, PE-Nitride, PE-TEOS films. It was observed that the oxynitride and nitride using plasma was greatly decreased in hot carrier effect in comparison with silicon oxide. Consequently, silicon oxide turned out to be a better PMD-1 material than PE-oxynitride and PE-nitride. Also, LP-TEOS film was the best PMD-1 material Among the silicon oxides.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.119-119
• /
• 2008

The electrical characteristics of Metal-Ferroelectric-Nitride-Oxide-Silicon (MFNOS) structure is studied and compared to the conventional Silicon-Oixde-Nitride-Oxide-Silicon (SONOS) capacitor. The ferroelectric blocking layer is SrBiNbO (SBN with Sr/Bi ratio 1-x/2+x) with the thickness of 200 nm and is fabricated by the RF sputter. The memory windows of MFNOS and SONOS capacitors with sweep voltage from +10 V to -10 V are 6.9 V and 5.9 V, respectively. The effect of ferroelectric blocking layer and charge trapping on the memory window was discussed. The retention of MFNOS capacitor also shows the 10-years and longer retention time than that of the SONOS capacitor. The better retention properties of the MFNOS capacitor may be attributed to the charge holding effect by the polarization of ferroelectric layer.