• 한국수소및신에너지학회논문집
• /
• 제13권2호
• /
• pp.119-126
• /
• 2002

The methanol partial oxidation using commercial $CuO/ZnO/Al_2O_3$ catalysts in a plug flow reactor was studied in the temperature range of $200{\sim}250^{\circ}C$ at atmospheric pressure, It was achieved the high activities by Cu-based catalysts and the selectivity of $CO_2$/$H_2$ was 100% when $O_2$ was fully convened. The reactivity changes and their hysteresis with increasing/decreasing temperatures were observed due to the chemical state differences between the oxidation and the reduction on the Cu surface, It was suggested as the two-step reaction: the complete oxidation and the following steam reforming for methanol, which was indicated by the distributions of final products vs. the residence time. In addition, the complete oxidation step was shown to be extremely fast and the total reaction rate can be controlled by the steam reforming reaction.

• Bulletin of the Korean Chemical Society
• /
• 제23권3호
• /
• pp.503-506
• /
• 2002

• Bulletin of the Korean Chemical Society
• /
• 제23권6호
• /
• pp.851-856
• /
• 2002

The Reaction of S-methyl-S-cysteine(L-Smc) with racemic $s-cis-[Co(demba)Cl_2]-1$ (Hydmedba = $NN'-dimethylethylenediamine-NN'-di-\alpha-butyric$, acid) yields ${\Delta}$-s-cis-[Co(dmedba)(L-Smc)] 2 with N, O-chelation. Oxidation of sulfur of 2 with $H_2O_2$ in a 1 : 1 mole ratio gives ${\Delta}$-s-cis[Co(dmedba)(L-S(O)mc)] 3 having an uncoordinated sulfenate group. Oxidation of sulfur of L-Sm with $H_2O_2in$ a 1: 1 mole ratio produces S-methyl-L-cysteinesulfenate (L-S(O)me) 5. Direct reaction of 1 with 5 in basic medium gives an N.O-chelated ${\Delta}$s-cis[Co(dmedba)(L-S(O)mc)-N.O], which turmed out be same as obtained by oxidation of 2, while an N, S-chelated ${\Delta}$-s-cis-[Co(dmedba)(S-S(O)mc)-N,O] complex 4 is obtained in acidic medium from the reaction of 1 with 5. This is one of the rare $[$Co^{III}$(N_2O_2-type$ ligand)(amino acid)] type complex preparations, where the reaction conditions determine which mode of N, O and N, S caelation modes is favored.

• 환경위생공학
• /
• 제12권2호
• /
• pp.51-57
• /
• 1997

This work carried out the removal of aniline by wet oxidation in aqueous solutions like a industrial wastewater using Ozone, UV, and Ozone-UV . The main features of this experiment are as follows: the aniline was decomposed by OH and HO$_{2}$ radicals which produced from the reaction of water with UV and Ozone, when the Ozorie and Ozone-UV used the aniline was decomposed completely. The decomposition of aniline was very fast reaction and the reaction times were within 10min. and 20min. in case of for Ozone Ozone-UV respectively. Assumed simplified reaction mechanism from the aniline oxidation model, and the we are calculated the theoretical reaction rate constants by computer simulation, and then compared with experimental data. We suggest that this simulation program is applicable to estimate of the aniline decaying concentration and removal efficiency of aniline - contaminated wastewater.

• Bulletin of the Korean Chemical Society
• /
• 제30권9호
• /
• pp.1939-1945
• /
• 2009

Kinetic investigations on the oxidation of pyrazine and four 2-substituted pyrazines viz., 2-methylpyrazine, 2-ethylpyrazine, 2-methoxypyrazine and 2-aminopyrazine by bromamine-B (BAB) to the respective N-oxides have been studied in HCl$O_4$ medium at 303 K. The reactions show identical kinetics being first-order each in $[BAB]_o\;and\;[pyrazine]_o$, and a fractional- order dependence on $[H^+]$. Effect of ionic strength of the medium and addition of benzenesulfonamide or halide ions showed no significant effect on the reaction rate. The dielectric effect is positive. The solvent isotope effect was studied using $D_2$O. The reaction has been studied at different temperatures and activation parameters for the composite reaction have been evaluated from the Arrhenius plots. The reaction showed 1:1 stoichiometry and the oxidation products of pyrazines were characterized as their respective N-oxides. Under comparable experimental conditions, the oxidation rate of pyrazines increased in the order: 2-aminopyrazine > 2-methoxypyrazine > 2-ethylpyrazine > 2-methylpyrazine > pyrazine. The rates correlate with the Hammett $\sigma$ relationship and the reaction constant $\rho$ was found to be -0.8, indicating that electron donating centres enhance the rate of reaction. An isokinetic temperature of $\beta$ = 333 K, indicated that the reaction was enthalpy controlled. A mechanism consistent with the experimental results has been proposed in which the rate determining step is the formation of an intermediate complex between the substrate and the diprotonated species of the oxidant. The related rate law in consistent with observed results has been deduced.

• 대한환경공학회지
• /
• 제22권11호
• /
• pp.2077-2083
• /
• 2000

산업 현장에서 많이 사용되고 있는 반응성 염료인 remazol $black_5$를 연구 대상물로 선택하여 촉매습식 산화공법으로 처리하였다. 이때 반응성 염료성분의 분해효율, 촉매 첨가량 및 반응온도와 상호 관련하여 검토한 결과를 정리하였다. 이산화티탄 담체에 백금을 5.0wt% 담지한 촉매 1.5g/L, 6기압, $200^{\circ}C$ 이상에서 remazol $black_5$는 약 95% 이상 분해되었다. 반응온도 $250^{\circ}C$에서 240분 촉매산화를 하였을 때 uv 흡광 잔존율은 4%이고 반응온도가 $250^{\circ}C$, 120분 경과 후 색도 제거율은 약 95% 이상이었다.

• 대한환경공학회지
• /
• 제33권10호
• /
• pp.723-730
• /
• 2011

본 연구는 토양이나 지하수 원위치 화학적 산화법(In-Situ Chemical Oxidation, ISCO)에서 사용할 수 있는 산화제 Persulfate를 상온에서 활용할 수 있도록 RDX를 처리대상물질로 연구하였다. Persulfate로 RDX를 처리한 결과, 반응은 유사1차반응으로 나타났으며 온도가 증가함에 따라 분해속도도 증가하였고, 이 때 활성화에너지(Activation energy)는 $1.14{\times}10^2kJ/mol$으로 산정되었다. Persulfate에 의한 RDX의 분해반응속도는 pH에 비례하여 증가하였으며, pH값이 4, 6, 8일 때 반응속도의 변화가 크지 않았다. 그러나 pH 10에서는 13배 이상 증가하였는데, persulfate에 의한 산화가 아니라 alkaline hydrolysis로 나타났다. Persulfate에 의한 RDX의 분해반응속도는 persulfate/RDX의 몰 비율에 따라 선형적으로 증가하였으며, $70^{\circ}C$에서 측정한 비례상수는 $4{\times}10^{-4}$ ($min^{-1}$/몰 비율)이었다. 용액 내 천연유기물(NOM) 농도가 증가함에 따라 persulfate에 의한 RDX 분해속도 선형 감소하였으며 $70^{\circ}C$, persulfate/RDX 몰비 10/1에서 측정한 비례상수는 $1.21{\times}10^{-4}$ ($min^{-1}{\cdot}L/mg-NOM$)이었다. 반응속도의 감소는 NOM 첨가량에 선형적으로 비례하였다. NOM 20 mg/L을 첨가한 반응의 Ea값은, 무첨가 반응에서 산정된 Ea값과 3.3% 오차에 불과하였는데, 이는 NOM의 첨가가 본래의 산화반응을 변화시키지는 않음을 의미한다.

• 한국응용과학기술학회지
• /
• 제22권1호
• /
• pp.56-61
• /
• 2005

Methanol was synthesized by homogeneous and catalytic reactions of partial oxidation of methane. The effect of pressure, temperature and oxygen concentration on methanol synthesis was investigated. The catalyst used was Bi-Cs-Mg-Cu-Mo mixed oxide. The partial oxidation reaction was carried out in a fixed bed reactor at 20${\sim}$46 bar and $450{\sim}480^{\circ}C$ and oxygen concentration of 5.3${\sim}$7.7mol%. The results were compared with results of homogeneous reaction performed at the same conditions. Methane conversions of the homogeneous and catalytic reactions increased with temperature. Methanol selectivity of the homogeneous reaction decreased with increasing temperature. However, the methanol selectivity of catalytic reaction increased with temperature. For both homogeneous and catalytic reactions, the methane conversions were around 5%. This may be due to the low oxygen concentration. Methanol selectivity of the catalytic reaction was higher than that of homogeneous one.

• 환경위생공학
• /
• 제17권1호
• /
• pp.69-74
• /
• 2002

This study explored for treatment processes by investigating the treatment efficiency and reaction mechanism through oxidation reaction using UV and $O_3$ as oxidant in compensate the wastewater containing nitrobenzene that is non biodegradable organic. Also by modeling these reactions, we try to step explanation of optimum reaction rate and reaction mechanism as the development of the computer program predictable the reaction rate by modeling the reaction. By using this model, after kinetic constant for each reaction from an experimental data is made an optimization and for hardly contribute to reaction rate in reaction kinetic equation is made an ignorance and suppose the simplified reaction mechanism, examined the propriety of computer simulation model and simplified reaction mechanism by comparing and inspecting the reaction kinetic constant and masstransfer coefficient. An investigation results for destructional treatment of nitrobenzene in the wastewater as non-biddegradable organic using UV, $O_3{\;}O_2{\;}H_2O_2-UV$ as oxidant.

• 상하수도학회지
• /
• 제9권4호
• /
• pp.87-96
• /
• 1995

The Electron/Hole Pair is generated when the activation energy produced by ultraviolet ray illuminates to the semiconductor and OH- ion produced by water photocleavage reacts with positive Hole. As a results, OH radical acting as strong oxidant is generated and then Photocatalytic oxidation reaction occurs. The photocatalytic oxidation can oxidate the non-degradable and hazardous organic substances such as pesticides and aromatic materials easier, safer and shorter than conventional water treatment process. So in this study, many factors influencing the oxidation of chlorophenols, such as inorganic electrolytes addition, change of oxygen and nitrogen atmosphere, temperature, pH, oxygen concentration, chlorophenol concentration, were throughly examined. According to the experiments observations, it is founded that the rate of chlorophenol oxidation follows a first-order reaction and the modified Langmuir-Hinshelwood relationship. And the photocatalytic oxidation occurs only when activation energy acting as Electron/Hole generation, oxygen acting as electron acceptor to prevent Electron/Hole recombination, $TiO_2$ powder acting as photocatalyst are present. The effects of variation of dissolved oxygen concentration, temperature and inorganic electrolytes concentration on 2-chlorophenol oxidation are negligible. And the lower the organic concentration, the higher the oxidation efficiency becomes. Therefore, the photocatalytic oxidation is much effective to oxidation of hazardous substances at very low concentration. The oxidation is effective in the range of 0.1 g/L-10 g/L of $TiO_2$. Finally when the ultra-violet ray is illuminated to $TiO_2$, the surface characteristics of $TiO_2$ change and Adsorption/Desorption reaction on $TiO_2$ surface occurs.