• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2002년도 추계총회 및 학술발표회
• /
• pp.3-4
• /
• 2002

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.236-241
• /
• 1999

The characteristics of the deterioration and oxidation of high speed steel(

• Environmental Analysis Health and Toxicology
• /
• 제14권3호
• /
• pp.121-126
• /
• 1999

The present paper describes a study of the photochemical kinetics and its oxidation mechanism of DBT. The photolysis of DBT in aqueous solution media have shown to have significant oxidation activities for the photolytic desulfurization of DBT. The oxidation effect was more pronounced in 4 % NaCl solution. A mechanism was proposed that the desulfurization process arise from the substution of sulfur by the hydroxyl radicals in different aqueous medium.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 학술논문집
• /
• pp.105-114
• /
• 2004

This study investigated the thermal behavior of the nuclear graphite waste generated from the decommissioning of the Korean nuclear research reactor, The first part study investigated the decomposition rate of the nuclear graphite waste up to $1000^{\circ}C$ under various oxygen partial pressures using a thermo-gravimetric analyzer (TGA). Tested graphite waste sample not easily destroyed in the oxygen-deficient condition. However, the gas-solid oxidation reaction was found to be very effective in the presence of oxygen. No significant amount of the product of incomplete combustion was formed even in the limited oxygen concentration of 4% $O_2$. The influence of temperature and oxygen partial pressure was evaluated by the theoretical model analysis of the thermo-gravimetric data. The activation energy and the reaction order of graphite oxidation were evaluated as 128 kJ/mole and 1.1, respectively. The second part of this study investigated the behavior of radioactive elements under graphite oxidation atmosphere using thermodynamic equilibrium model. $^{22}Na$, $^{134}Cs$ and $^{137}Cs$ were found be the semi-volatile elements. Since volatile uranium species can be formulated at high temperatures above $1050^{\circ}C$, the temperature of incinerator furnace should be minimized. Other corrosion/activation products, fission products and uranium were found to be the non-volatile species.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.149-152
• /
• 2006

Dry sliding wear behavior of low carbon dual phase steel, of which microstructure consists of hard martensite in a ductile ferrite matrix, has been investigated. The wear characteristics of the dual phase steel was compared with that of a plain carbon steel which was normalized at $950^{\circ}C$ for 30min and then air-cooled. Dry sliding wear tests were carried out using a pin-on-disk type tester at various loads of 1N to 10N under a constant sliding speed condition of 0.2m/sec against an AISI 52100 bearing steel ball at room temperature. The sliding distance was fixed as 1000m for all wear tests. The wear rate was calculated by dividing the weight loss measured to the accuracy of $10^{-5}g$ by the specific gravity and sliding distance. The worn surfaces and wear debris were analyzed by SEM, EDS and a profilomter. Micro vickers hardness values of the cross section of worn surface were measured to analyze strain hardening behavior underneath the wearing surfaces. The were rate of the dual phase steel was lower than the plain carbon steel. Oxidation on the sliding surface and strain hardening were attributed for the higher wear resistance of the dual phase steel.

• 한국재료학회지
• /
• 제8권8호
• /
• pp.757-765
• /
• 1998

수소를 연료로 하여 HVOF 용사된 크롬카바이드 용사층의 산화거동을 이해하기 위해 용사분말의 제조방법이 서로 다른 두 종류의 용사용 분말을 ($\textrm{Cr}_{3}\textrm{C}_{2}$-20wt%NiCr로 구성된 크래드 분말과 $\textrm{Cr}_{3}\textrm{C}_{2}$-7wt%NiCr로 구성된 혼합분말)이용하여 F/O비를 3.2, 3.0, 2.8 로 변화시켜 용사한 후, $1000^{\circ}C$ 까지 등온 산화실험 후, 산화특성을 고찰하여 크롬카바이드 용사층의 F/O비에 의존하는 산화거동을 비교 검토하였다. 그 결과 NiCr이 20wt% 크래드된 분말로 용사된 용사층과 NiCr이 7wt% 혼합된 분말로 용사된 용사층은 전혀 다른 산화거동을 보였다. 혼합분말의 경우에 $1000^{\circ}C$에서 50시간 등온산화실험 후, F/O=3.2의 조건인 경우에는 산화물이 표면 요철을 따라 비교적 균일하게 성장한 반면 F/O=3.0과 F/O=2.8의 경우에는 용사층 표면이 다공성의 산화물이 형성되었으며, 또한 Ni, Cr으로 이루어진 복합산화물인 oxide cluster로 성장하였다. 반면에 크래드 분말로 용사된 용사층의표면 산화물 층은 다공성을 변화되지 않았다. 이러한 용사분말의 제조방법에 따라 산화거동이 차이를 보이는 것은 용사 중에 발생하는 카바이드분해와 밀접한 관계가 있는 것으로 생각되며 또한 일반적으로 알려진 크롬카바이드 소결체 보다 산화율이 높았다. 이러한 결과로 볼 때, 환원성의 수소의 양에 따른 용사층의산화거동에 대해서도 연구가 필요할 것으로 생각된다.

• 한국재료학회지
• /
• 제6권1호
• /
• pp.57-66
• /
• 1996

MoSi2 heating elements were fabricated by sintering of MoSi2 powders which were synthesized through SHS(Self-propagating high-temperature synthesis). Their high-temperature oxidation behavior in air through SHS(Self-propagating high-temperature synthesis). Their high-temperature oxidation behavior on air at 1000-1600$^{\circ}C$ was investigated through a high-temperature X-ray diffractomer and isothermal heating in a muffle furnace. The thermal expansion of MoSi2 and SiO2 was studied by measuring their lattice parameters on heating. The linear expansion coeffcient of MoSi2 along c-axis was about 1.5 times larger than that along a-axis showing a strong thermal anisotropy. Few $\mu\textrm{m}$-thick Mo5Si3 layer was found beneath SiO2 layer suggesting that The major reaction products would be SiO2 and Mo5Si3. The Si-rich bentonite resulted in the faster growth of MoSi2 grains probably by enhancing the mass transport when they are melted during high-temperature oxidation.

• 에너지공학
• /
• 제5권2호
• /
• pp.193-197
• /
• 1996

A study was conducted on the oxidation behavior of U-0.75 wt% Ti chips (Depleted Uranium, DU chips) using an XRD and a thermogravimetric analyzer in the temperature range from 250 to 500$^{\circ}C$ in air. At the temperature lower than 400$^{\circ}C$, DU chips were converted to UO$_2$, U$_3$O$\_$7/, and U$_3$O$\_$8/ whereas at the temperature higher than 400$^{\circ}C$, DU chips were completely converted to U$_3$O$\_$8/, the most stable form of uranium oxide. The activation energy for the oxidation of DU chips is found, 44.9 kJ/mol and the oxidation rate in terms of weight gain (%) can be expressed as; dW/dt8.4${\times}$10$^2$e(equation omitted) wt%/min (250$\leq$T($^{\circ}C$) $\leq$ 500) where W=weight gain (%), t=time and T=temperature.

• 한국재료학회지
• /
• 제16권12호
• /
• pp.766-770
• /
• 2006

The frictional behavior of oxide films on top of the plasma nitrocarburized compound layers was investigated in terms of post-oxidation treatment temperatures. The post-oxidation treatment at both temperatures($400^{\circ}C,\;500^{\circ}C$) produced magnetite($Fe_3O_4$) films which led to a significant enhancement in corrosion resistance. However, this process did not result in any improvement in frictional behavior of the nitrocarburized surface. The wear mechanisms were governed predominantly by the abrasive action of the slider on the surface irrespective of the counterface material(SiC and Bearing steel). When the specimen was sliding against a SiC counterface, the oxide films were destroyed during the early stage of the sliding process and the wear debris of the oxide film at the sliding track had a great influence on the friction coefficient. On the other hand, when sliding against a bearing steel counterface, the slider was mainly worn out due to the much higher hardness of the surface hardened layer. The fluctuation of the friction coefficient of $400^{\circ}C$-oxidized/ nitrocarburized specimen is much severer than that of $500^{\circ}C$ specimen, due to the less amount of wear debris.

• 대한금속재료학회지
• /
• 제50권7호
• /
• pp.539-544
• /
• 2012

Thermal shock behavior of TiN-coated SUS 304 substrate was investigated using a laser ablation method. By short surface ablation with a pulse Nd-YAG laser, considerable surface crack and spalling were observed, whereas there were few oxidation phenomena, such as grain growth of TiN crystallites, nucleation and growth of $TiO_2$ crystallites, which were observed from the coatings quenched from $700^{\circ}C$ in a chamber. The oxygen concentration of the ablated coating surface with the pulse laser also had a lower value than that of the quenched coating surface by Auger electron spectroscopy and electron probe micro analysis. These results were attributed to the fact that the properties of the pulse laser method have a very short heating time and so the diffusion time for oxidation was insufficient. Consequently, it was verified that the laser thermal shock test provides a way to evaluate the influence of the thermal shock load reduced oxidation effect.