• 한국환경농학회지
• /
• 제21권4호
• /
• pp.291-296
• /
• 2002

In this investigation we tried to investigate the effect of oxalic acid on the fate of native sulfate in Bt soil that contained a high kaolinitic clay by observing the distribution of two anions using soil column under the given competitive adsorption between displaced and displacing anions. To do this, the soil columns uniformly packed to a bulk density of 1.25 $g/cm^3$ with Cecil Bt soil were disected and analyzed the amounts of sulfate and oxalic acid both in solution and solid phases after flowing the designated pore volumes of oxalic acid The results showed that two sets of curves-nonlinear (> $10^3M$) and linear (> $10^3M$) curves where the solution of oxalic acid was not adiustet while the approaches to the plateau were slow when pH of oxalic acid was adjusted to 5. The cumulative amount of sulfate desorbed by successive addition of oxalic acid was nonlinearly approached to the plateau at the concentration of $10^3M$ or greater, indicating that the number of addition of oxalic acid increased with decreasing order of oxalic acid. However, the plateau did not obtain where the concentration of oxalic acid were less than $10^4M$, showing a linear increase. Therefore, we may conclude that the rate-limited desorption was involved as the concentration of oxalic acid decreased.

• Journal of the Korean Wood Science and Technology
• /
• 제23권4호
• /
• pp.54-59
• /
• 1995

This experiment was carried out to evaluate the role of oxalic acid metabolism in the incipient decay of brown rotting, and to investigate the effects of various compositions of culture medium. Until 5days incubation, the amount of oxalic acid produced by Tyromyces palustris was increased, while pH was gradually decreased. The difference in oxalic acid production depending on carbon sources was not significant and the pH adjustment of media did not stimulate the production of oxalic acid. In this experiment, hemicellulose was hydrolyzed with 1% oxalic acid, so it is suggested that nonenzymatic acid hydrolysis of hemicelluloses might be involved in the process of incipient decay of brown-rot fungi.

• 대한환경공학회지
• /
• 제22권7호
• /
• pp.1307-1318
• /
• 2000

원자력 발전소에서 발생되는 제염폐수에 함유된 Oxalic acid와 Citric acid를 고급산화방법(Advanced Oxidation Process) 중의 하나인 $UV/H_2O_2$를 적용하여 이들 물질의 분해특성 및 최적처리조건을 파악하고자 하였다. 이를 위하여 각각의 물질에 대하여 $H_2O_2$나 UV를 단독사용할 경우, pH 및 과산화수소의 주입량 변화, Oxalic acid와 Citric acid의 농도변화에 따른 분해특성에 대하여 조사하였다. $H_2O_2$나 UV만으로도 완전분해가 가능한 반면 Citric acid는 같은 파장의 UV만으로는 분해가 잘되지 않는 것으로 조사되었다. 또한 과산화수소와는 두 물질 모두 반응성이 없는 것으로 조사되었다. 산화공정에서 반응속도상수, 반응시간, 제거효율, 과산화수소 소모량 등에 대한 결과를 종합한 결과 Oxalic acid의 경우 pH 4 이하의 낮은 pH에서, Citric acid는 pH 4~6 정도의 약산성 부근에서 높은 분해효율을 나타내는 것으로 조사되었다. 최적 pH에서는 과산화수소의 주입량이 증가할수록 두 물질 모두 제거효율이 증가하는 것으로 조사되었으나 과산화수소의 주입량이 200 mg/L 이상을 초과하는 경우에는 과산화수소에 의한 OH radical trap에 의하여 제거효율이 감소하는 것으로 조사되었다. 이상의 결과 $UV/H_2O_2$ 광분해에 의한 Oxalic acid와 Citric acid의 처리시 pH 4에서 과산화수소 주입량 200 mg/L일 경우 가장 효율적인 것으로 조사되었다.

• 대한화학회지
• /
• 제20권1호
• /
• pp.43-47
• /
• 1976

염산 산성(1∼4N) 용액에서 Zr(IV)-XO 착물의 흡광도가 옥살산의 첨가량에 반비례하는 현상을 이용하여 미량의 옥살산을 정량하는 방법을 확립하였다. 말산, 말론산, 말레산, 후마르산, 숙신산, 엽산, 글루타민산은 옥살산량의 100배가 공존하여도 미량의 옥살산을 정량하는 데 방해하지 않지만 타르타르산과 시트르산은 옥살산 보다 많으면 방해한다.

• Restorative Dentistry and Endodontics
• /
• 제6권1호
• /
• pp.37-50
• /
• 1980

Scanning Electron Microscopic (SEM) examination on the labial surface of 91 permanent upper incisors were made after etching procedure with phosphoric acid, sulfuric acid, nitric acid, hydro chloric acid, oxalic acid, formic acid, citric acid and zinc phosphate liquid for 2 minutes. Following results were obtained. 1. In the surfaces etched by 10%. 50% phosphoric acid, 50% sulfuric acid, 10%. 30% nitric acid, 10%. 50% oxalic acid, 10%. 30%. 50% formic acid, 30%. 50% citric acid and zinc phosphate liquid, there appeared to be a preferential removal of prism cores, but in the surfaces etched by 10% phosphoric acid, 50% nitric acid, 10%. 30% hydrochloric acid and 30% oxalic acid, the prism peripheries were removed preferentially. 2. According to Silverstone classification on enamel etching pattern the surface treated by zinc phosphate liquid, 30. 50% citric acid, 10%. 30%. 50% formic acid, 10%. 50% oxalic acid, 10%. 30% nitric acid, 50% sulfuric acid and 10%. 50%. phosphoric acid showed Type 1, and etched by 30% oxalic acid, 10%. 30% hydrochloric acid, 50% nitric acid and 10% phosphoric acid showed Type II. Etching of prism cores was by far the most common occurence. The changes produced could be related to intrinsic differences in histology and / or solubility of enamel.

• 한국표면공학회지
• /
• 제37권2호
• /
• pp.86-91
• /
• 2004

Effect of potassium formate, glycine and oxalic acid in a sulfate solution on the deposit composition and current efficiency of trivalent chromium plating was studied. The trivalent chromium layers prepared by solutions with potassium formate, glycine and oxalic acid contain a few carbon inside. The solutions containing potassium formate, glycine and oxalic acid are relatively stable with pH change. The solution with the potassium formate shows 6-30％ current efficiency with current density, whereas, the solutions with oxalic acid and glycine show about 5％ current efficiency, respectively. The improved current efficiency is related to enough supply of chromium ions to the electrode due to the increase of pH at the front of electrode.

• Journal of Nutrition and Health
• /
• 제10권4호
• /
• pp.104-110
• /
• 1977

Vegetables are liberally taken to enhance the mineral, vitamin, and rouphage value of the diet. And calcium is an essential mineral at all ages, although the daily requirement varies with physiological status of the individual. On the other hand, oxalic acid is an unwanted constituent of several clinical disorders. It is therefore necessary to take into account the calcium as well as the oxalic acid content of the various calcium, foods. Oxalic acid, calcium, calcium/oxalic acid ratio and available calcium have been determined in 31 kinds of the Korean common vegetables. The results are summarized as follows; 1. The highest content of oxalic acid has been recorded in Amaranth. spinach and beet. It is respectively 1,100mg%, 619mg%, 550mg% in fresh sample. It is comparatively high in Leek, leavels of perilla, Mugwort, Chyi-leaves, green red pepper, Burdock. 2. Many vegetables have been calculated as below 2.0 in the calcium/oxalic acid ratio. 3. Avaiable calciumis much in Malaolitoria, Lettuce, Green onion whole, Green garlic, Wild onion, Cabbage and Radish root. 4. A food calendar is suggested as a guide to the proper selection of food items for normal individuals and for those suffering from urolithiasis, cardiovascular disease or calcium deficiency status.

• 한국표면공학회지
• /
• 제17권3호
• /
• pp.78-86
• /
• 1984

Hard anodic oxide film was investigated formed on pure aluminium with various temperature (30$^{\circ}-60^{\circ}C$), current densities (1.5-3.0A/$dm^2$) and concentrations(3-15g/l) of oxalic acid in 0.5M malic acid bath. The resulting characteristic of the anodic oxide film obtained were summarized as follows in the view point of physical and mechanical properties in relation with the above process variables. 1. The film thickness increased with oxalic acid concentration and bath temperature, while the reversed phenomena were obtained at a high concentration of oxalic acid and high temperature due to the severe dissolution of the anodic oxide film. 2. The hardness and the abrasion resistance were improved by lowering the addition of oxalic acid and the bath temperature. This feature was directly dependent on the porosity formed on the anodic oxide film. 3. The maximum hardness of anodic oxide film showed Hv 579 in the temperature of 30$^{\circ}C$ with the current density, 2.5A/$dm^2$ in the 0.5M malic acid bath mixed with 5g/l oxalic acid.

• 한국환경과학회지
• /
• 제9권1호
• /
• pp.43-47
• /
• 2000

A study on the remediation of heavily for ion contaminated soils from abandoned iron mine was carried out, using ex-situ extraction process. Also, oxalic acid as a complex agent was evaluated as a function of concentration, reaction time and mixing ratio of washing agent in order to evaluate Fe removability of the soil contaminated from the abandoned iron mine. Oxalic acid showed a better extraction performance than 0.1N-HCl, i.e., the concentrations of Fe ion extracted from the abandoned mine for the former at uncontrolled pH and the latter were 1,750 ppm and 1,079 ppm, respectively. The optimum washing condition of oxalic acid was in the ratio of 1:5 and 1:10 between soil and acid solution during l hr reaction. The total concentrations of Fe ion by oxalic acid and EDTA at three repeated extraction, were 4,554 ppm and 864 ppm, respectively. The recovery of Fe ions from washing solution was achieved, forming hydroxide precipitation and metal sulfide under excess of calcium hydroxide and sodium sulfide. In addition, the amounted of sodium sulfide and calcium hydroxide for the optimal revovery of Fe were 15g/$\ell$ and 5g/$\ell$ from the oxalic acid complexes, respectively.

• 펄프종이기술
• /
• 제33권1호
• /
• pp.73-79
• /
• 2001

Stricter environmental demands have increased the need to replace conventional C/D bleaching sequence by chlorine-free sequence. Permanganate is well known as a powerful oxidant and have been used industrially in variable fields. However, it has considered to be difficult to use permanganate as a bleaching reagent because of its strong oxidative effect decreasing the viscosity of pulps extremely. We have tried to use permanganate as a bleaching reagent for KP under the mild condition and it was clear that pernanganate oxidized lignin remained in pulps selectively and increased pulp brightness decreasing K number of pulps with small degradation of cellulose. We have employed the neutral condition in the permanganate bleaching process in this study. In this case, permanganate was converted to manganese dioxide after bleaching reaction. The manganese dioxide is remained in the treated pulp fibers because of its insolublity in water. So it was required to reduction the manganese oxide to manganese ion by using reductants with acid. In this paper, we proposed to use oxalic acid as a reducing reagent converting manganese oxide to manganese ion after bleaching reaction. Oxalic acid plays the role as a reductant and a acid, so post-treatment after bleaching became to be easy by using oxalic acid. On the study using lignin model compounds, it was clear that permaganate react with phenols firstly, after that oxalic acid reduce the manganese oxide to manganese ion in the mixture of permanganate, phenols and oxalic acid. Several lignin model compounds ($\textit{p}$-hydroxybenzaldehyde, vanillin, syringaldehyde, veratraldehyde) are selected to elucidate the effect of substituents on reaction rate and its mechanism with permanganate including oxalic acid in this study. Except for veratraldehyde, the rate of oxidative degradation of phenolic compounds by permanganate with oxalic acid are higher than neutral condition. Especially, the degradation rate of $\textit{p}$-hydroxybenzaldehyde are strongly dependent on pH of reaction mixture. On the other hand, the degradation rate of veratraldehyde are decreased with decreasing pH and main degradation product is veratric acid. This result indicate that pH of bleaching liquor should be kept over 2 to degrade of non-phenolic lignin in the pulps effectively in permanganate bleaching.