• 자원리싸이클링
• /
• 제1권1호
• /
• pp.58-68
• /
• 1992

아연을 함유하고 있는 산업폐기물로부터 첨단산업의 소재원료인 미립의 고순도 ZnO 분말을 아연제련의 용매추출 공정에서 직접 합성할 수 있는 방법을 개발하고자 하였다. 아연 함량이 55%인 선재산업의 폐기물을 황산으로 침출하여 아연을 추출하였다. 함아연 용액에서 철분을 침전시켜 제거한 후 D2EHPA를 추출제로 사용하는 용매추출에 의해 아연이온을 유기상으로 추출하여 정제한 뒤 oxalic acid와 같은 침전제를 사용하여 유기상의 아연 이온을 precipitation stripping 법으로 탈거, 침전시켜 $ZnC_2O_4$ 분말을 합성하였으며 이를 해소하여 99.9% 이상의 ZnO 분말을 제조하였다. 황산농도, 침출시간, 황액농도가 아연의 침출율에 미치는 영향과 용매추출시 용액의 산도에 따른 아연과 불순물의 추출거동을 조사하여 최적정제조건을 얻었다. 또한 oxalic acid의 농도, 온도, 계면활성제의첨가, 침전시간 등이 생성된 $ZnC_2O_4$ 분말의 형상과 입자크기 및 분포에 미치는 영향에 대해 조사하였다.

• 동아시아식생활학회지
• /
• 제15권3호
• /
• pp.306-314
• /
• 2005

This study was carried out to examine physicochemical characteristics of three kinds of commercial spinach produced from three areas(Gyeongbuk Yeongdeok Younghea, Gyeongnam Tongyeong Yongnam, Gyeongnam Tongyeong Gwangdo) in autumn of 2004. The length, weight, moisture, minerals, oxalic acid, chlorophyll, vitamin C, and Hunter's color values of spinach leaves and stem; were determined. Mg, Ca, Na, K, chlorophyll, and vitamin C contents of leaves were higher than those of stems. On the other hand, stem; showed higher contents in Fe, P and oxalic acid Moisture, Mg, Na, Fe, chlorophyll, and vitamin C contents in the spinach leaves from Gwangdo were higher than those from Yongnam and Younghea, but oxalic acid lower a little.

• 동력기계공학회지
• /
• 제9권4호
• /
• pp.124-129
• /
• 2005

Copper oxide, CuO, are very important components include of high temperature super- conductors, and widely used. The properties of sintered materials were affected by the size and shape of copper oxide with starting materials in the solid-phase reaction. A homogeneous and fine CuO powder was prepared by thermal decomposition of the copper oxalate precursor. Copper oxalate was precipitated by the addition of copper nitrate solution to an oxalic acid solution. The influence of various factors such as temperature, pH, concentration as well as ultrasonic irradiation in the solution were investigated.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.337-339
• /
• 2003

The technology removing radionuclides from soil using soil washing was studied. The main radionuclides contaminated in the soil are Cs$^{137}$ and Co$^{60}$ . It is suitable that scrubbing time is 4 hours and a mixing ratio of soil weight and washing solution volume is 1:10. more than two times continuous scrubbing method with 0.5 M oxalic acid was needed to remove Cs$^{137}$ and Co$^{60}$ from soil more than 70%. Radionuclides removal efficiencies of recycling washing solutions recycled with strong acid resins until 5 times are similar to that of 0.5 M oxalic acid.

• 분석과학
• /
• 제8권4호
• /
• pp.855-858
• /
• 1995

Vegetables contain more or less calcium. By the traditional method the total calcium in the vegetable was analyzed. A part or calcium in the vegetable is fixed as calcium oxalate and the calcium does not utilize for nutrition. In this investigation the free calcium was determined by extraction in boiling water, the combined calcium with oxalic acid was determined by extraction in 0.1 M hydrochloric aci and the other calcium combined with protein, amino acid etc. was estimated. The amount of calcium obtained from the difference between the total calcium and calcium exmtaining in calcium oxalate was estimated to be nutritious.

• 한국표면공학회지
• /
• 제53권5호
• /
• pp.249-256
• /
• 2020

As the size of manufacturing equipment for LCD and OLED displays increases, replacement of existing heavy stainless steel components with light metals, such as aluminum alloys, is being more important in semiconducting and display manufacturing industries. To use aluminum alloys for components in semiconducting and display industries, it is important to develop a new anodization method for improved performance of anodic oxide films than conventional anodization method based on sulfuric acid. In this work, optimum applied current density and the best sealing methods for anodic oxide films in 3% oxalic acid were explored. Experimental results showed 2.5 A/dm2 is the best applied current density for improved hardness and dielectric breakdown voltage. Sealing of the anodic oxide films further improved their hardness, dielectric breakdown voltage and resistance to HCl, by which application of anodic oxide films become applicable for components in semiconducting and display industries.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 추계학술발표회논문집(2)
• /
• pp.551-556
• /
• 1996

본 연구에서는 정량적 전기화학 시험법인 DL-EPR test 와 ASTM 에 규정된 screening test 인 oxalic acid etch test 를 통해 질소강화 type 304L stainless steel 의 예민화 저항성을 평가하고, 두 시험법의 결과 사이의 상관관계를 알아보며, 질소함량이 예민화 저항성에 미치는 영향을 고찰하고자 하였다. 실험결과 일정수준에서 질소함량이 증가할수록 예민화가 지연되는 경향을 볼 수 있었고, 이런 현상은 두 시험법의 결과에서 공히 나타났다. 또한 DL-EPR test 와 oxalic acid etch test 간의 상관관계가 비례적으로 나타났으며, 각 oxalic acid etch 조직에 해당하는 DL-EPR test 결과값 (Ir/Ia) 을 얻을 수 있었다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2015년도 추계학술논문요약집
• /
• pp.465-466
• /
• 2015

In this study, different amount of (fe(0)) were dissolve into different strength of phosphoric ($H_3PO_4$) acid and the optimum solubility was observed at 0.89M Fe(0) into 4M of $H_3PO_4$ acid. Different concentration of oxalic acid was added to determine the optimum precipitated condition. The dissolution kinetics of Fe(0) into $H_3PO_4$ acid was investigated at $40-50^{\circ}C$. The optimum Fe-oxalate precipitate was dried and thermal decomposition using DSC-TG was conducted. Approximately 52 wt(%) of oxalic acid was removed at $300^{\circ}C$. Iron oxides such as magnetite and hematite that may be formed on the surface of nuclear waste were also dissolved into the $H_3PO_4$ acid and the optimum solubility for magnetite is 0.005M while that for hematite is 0.02M in 8M $H_3PO_4$ acid, respectively.

• 한국재료학회지
• /
• 제29권2호
• /
• pp.65-72
• /
• 2019

Dual porous structures are observed for the first time on a metallic Cu surface underneath anodic Cu oxide by the application of an anodizing voltage to Cu in oxalic acid. The as-prepared porous Cu surface contains macropores of less than $1{\mu}m$ diameter and mesopores of about tens of nanometers diameter with circular shapes. The size and density (number of pores/area) of the macropores are dependent on the applied voltage. It is likely that the localized dissolution (corrosion) of Cu in oxalic acid under the anodizing voltages is responsible for the formation of the mesopores, and the combination of a number of the mesopores might create the macropores, especially under a relatively high anodizing voltages or a prolonged anodizing time. The variations of pore structure (especailly macropores) with applied voltage and time are reasonably explained on the basis of the proposed mechanism of pore formation.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 Proceedings of the 4th Korea-China Joint Workshop on Nuclear Waste Management
• /
• pp.83-95
• /
• 2004

The removal efficiency of several washing agents on the $Cs^+$ ion was investigated. Leaching of $Cs^+$ ion from the soil surface by washing agents is affected by the exchange capability of the washing solution. Reuse tests of the effective soil washing agents such as $BaCl_2$, NaOH, citric acid＋ $HNO_3$ and oxalic acid were performed. NaOH, citric acid ＋ $HNO_3$ and oxalic acid solutions can be reused after passing through the ion exchange column. Among the tested solutions, both of citric acid＋ $HNO_3$ and oxalic acid were effective for the decontamination of TRIGA research reactor soil. The radioactivity of soils can be reduced to a release level by the successive application.