• 한국산학기술학회논문지
• /
• 제20권2호
• /
• pp.535-542
• /
• 2019

본 연구는 각종 누룩으로 제조한 누룩소금들의 성분을 비교분석하여 누룩소금 제조시 필요한 기초자료를 확보하고 사용자의 요구에 맞는 누룩소금을 선택할 수 있도록 하는 것을 목적으로 하였다. 누룩종류로 이화국, 미인국, 백국, 입국을 선정하여 누룩을 제조한 후 특성을 파악하였고, 재료비율과 온도 등 동일한 발효조건하에 누룩소금을 제조 후 이화학적 특성을 분석하였다. 누룩소금 제조 시 pH는 발효전 6.2-6.5에서 발효 3일후 6.1-6.2로 떨어진 다음 이후에는 약간 높아졌다. 총산은 발효전 0.16-0.18에서 발효후 0.22-0.25로 증가하였으며 누룩 간 차이는 없었다. 당도는 발효 후 높아졌으며 입국으로 만든 누룩소금이 가장 큰 당도 증가를 보였다. 누룩소금의 염도는 발효 전 30-32에서 발효 후 37-44로 높아졌으며 입국의 증가폭이 가장 컸다. 누룩소금의 유기산은 acetic acid, oxalic acid, malic acid, lactic acid, citric acid 순으로 많이 검출되었다. 백국소금의 oxalic acid는 0.77 mg/mL으로 입국소금의 2.3배 많았고, succinic acid도 1.19 mg/mL로 백국소금이 가장 많은 것으로 나타났다. 한편 malic acid, lactic acid, acetic acid 및 citric acid는 각각 0.29 mg/mL, 1.48 mg/mL, 0.12 mg/mL로 입국소금이 가장 많은 것으로 나타나 입국으로 제조한 누룩소금이 다른 누룩으로 제조한 누룩소금 보다 부드러운 감칠맛이 더 좋은 것으로 나타났다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2006년도 추계학술발표회 초록집
• /
• pp.87-87
• /
• 2006

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2019년도 춘계학술논문요약집
• /
• pp.416-417
• /
• 2019

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2019년도 춘계학술논문요약집
• /
• pp.420-421
• /
• 2019

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 추계학술논문요약집
• /
• pp.392-393
• /
• 2018

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 춘계학술논문요약집
• /
• pp.271-272
• /
• 2018

• 동력기계공학회지
• /
• 제5권3호
• /
• pp.80-87
• /
• 2001

Decorative properties of chromium depositions from oxalic acid bath containing chromium oxide and ammonium sulfate have been examined over a wide range of bath compositions and plating conditions. The obtained results from this experiment are summarized as follow: The followings were determined as a optimum conditions, bath compositions; $CrO_3\;200{\sim}250\;g/{\ell},\;H_2C_2O_4{\cdot}2H_2O\;500{\sim}700\;g/{\ell},\;(NH_4)_2SO_4\;40{\sim}120\;g/{\ell}$, and operation conditions; pH $2.0{\sim}2.5$, current density $15{\sim}250\;A/dm^2$ at bath temperature range of $30{\sim}80^{\circ}C$. Bright chromium deposits were obtained over a wide range of ammonium sulfate concentration and bath temperature. Decorative property for chromium deposition was adopted to apply stoichiometric ratio of $CrO_3$ concentration and $H_2C_2O_4{\cdot}2H_2O$.

• 한국생산제조학회지
• /
• 제21권4호
• /
• pp.532-540
• /
• 2012

In this study, some considerations have been suggested in developing on-site techniques to evaluate the sensitization of stainless steels. Electrochemical potentiokinetic reactivation (EPR) technique is known to be a candidate tool for field applications since it enables quantitative assessment in reasonable test time, compared to oxalic etching (ditch) technique. The on-site application of the test method imposes additional restrictions on the selection of the test method (for example, minimum surface preparation requirement, insensitivity to testing temperature, etc.). The EPR and etching techniques have been compared in order to sensitization of stainless steel structures. It has been widely reported that the maximum sensitivity in the welded structure of stainless steel is shown at heat-affected zone (HAZ) than weldments with cast structure. In this work, sectioned weldments and external surfaces were investigated to reveal the degree of sensitization by the etching and the results were compared with those of EPR test. The EPR test showed little sensitivity to surface roughness and test temperature.

• 한국안전학회지
• /
• 제19권2호
• /
• pp.41-46
• /
• 2004

The formation of rust on metallic substrate is known to cause the damages and destructions of raw materials, which is one of the leading reasons of sturctural collapses and many kind of hazards in modern industry. Polymer gels with rust removing effects were compounded in this study by employing various kinds of acids like hydrochloric acid, phosphoric acid, gluconic acid, oxalic acid as the rust removing ingredients. TEA(Triethanolamine) as dispersant and hydrophilic chemical were used for effective gelation of acids. Also corrosion inhibitor was added to enable the coating effect and to improve rust removing effect on metallic surface. In order to investigate the rust properites on metallic substrate, artificial rusts were prepared in salt solution, using iron, copper, aluminium and brass as the base metals. The properties of gel compounds were checked by gelation, pH, viscosity, morphology property and rust removing test. Developed gel compounds in this study have a good rust removing property, showing a strong adhesion on horizontal and vertical metallic surface, and can be easily rinsed off by water.

• 한국환경농학회지
• /
• 제27권3호
• /
• pp.279-284
• /
• 2008

We investigated whether carboxylate exudation of Brassica pekinensis Rupr. was affected by nitrate deposition from simulated acid rain. A gas chromatographic (GC) analysis was employed for the determination of low molecular weight organic acids (LOA) in rhizosphere soils, bulk soil, roots and leaves of Brassica pekinensis Rupr.. Rhizosphere soils were collected after 8 weeks of plant growth by first removing the bulk soil from the root system and then by mechanical move off the rhizosphere soil that adhered to the root surface with soft brush. Soil and plant materials were simultaneously extracted with the mixture of methanol and sulfuric acid (100:7, v/v). Seven organic acids, oxalic, malonic, fumaric, succinic, maleic, L-malic and citric acid were identified and quantified by GC equipped with FID. Oxalic, L-malic, and citric acids were found in both the bulk and rhizosphere soils, while most LOAs were not detected in the control treatment. On the contrary, except maleic acid, all other organic acids were detected in the leaves and roots of cabbages treated with nitrate deposition.