• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2078-2081
• /
• 1997

IP speed controller is used as a main controller and it makes the system low overshoot and easy controllability. Load torque is estimated by Kalman filter algorithm and parameter controller is used against a rotor inertia negative variations. Parameter Controller (PC) is equipped with a torque observer implemented by software of a digital signal Processor. PC is a parameter controller which selects a moment of inertia J in responding to a load torque to control the system response.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.321-325
• /
• 1986

A new control scheme for the state space model of the robot system using the theory of optimal multi-variable structure is presented in this paper. It is proposed to optimize multi-dimensional variable structure systems for obtaining the required stabilizing signal by minimizing a performance index with respect to the state vector in the sliding mode. It is concluded the proposed variable structure controller yields better system dynamic performance than that obtained by using the only linear optimal controller inthat responses for a step disturbance have a shorter setting time, no matter what overshoot values and rising time.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.12 s.354
• /
• pp.89-101
• /
• 2006

Frequency-variant transmission line parameters are determined. Then the signal transient characterizations of frequency-dependent multi-coupled lines are investigated. With the proposed method, an accurate signal integrity degradation such as signal ringing (overshoot, undershoot) and crosstalk noises relevant to the switching patterns of signals, rising / falling time(tr, tf) and line lengths is investigated. It is shown that there may be approximately 26% discrepancy of signal transients and 260% difference of crosstalk noises between the constant RLC model and frequency-variant RLC model in on-chip global interconnects while those of package lines are 11% and 70%, respectively.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.6
• /
• pp.21-28
• /
• 2007

Using multi-resolution, the mutiresolution proportional-integral-derivative(MRPID) controller functions as a filter to eliminate noise and disturbance which are included in error signals. If the sampling frequency is high, the response time will be delayed because of the remaining high frequency component although the overshoot is removed. However, if the sampling frequency is low, the response time will be enhanced by getting rid of signal components while the overshoot is increased. In this paper, the sampling frequency tuning method is used the response of the proportional integral derivative(PID) controller and the MRPID controller, and the parameter tuning method is considered the characteristic of the MRPID controller. The proposal method is verified by computer simulations.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.1
• /
• pp.99-104
• /
• 1999

The large scale industry needs high voltage converters. Therefore series connection of power semiconductor devices is necessary. It is important to prevent the overvoltage from being induced across a device above ratings by the proper voltage balancing in the field of IGBT series connection. In addition, the overvoltage induced by a stray inductance has to be limited in the high power circuit. This paper proposes a new gate control scheme which can balance the voltage properly and limit the overshoot by controlling the slope of collector voltage under the turn-off transient in the series connected IGBTs. The proposed gate control scheme which senses the collector voltage and controls the gate signal actively limits the overvoltage. The new series connected IGBT gate driver is made and its validity is verified by the experimental results in the series connected IGBT circuit.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.504-504
• /
• 2000

The flow ratio in the industrial process is usually accomplished by using PID controller with series type ratio. But always the large overshoot and a long rise time may be achieved from this conventional control. These problems are involved to the inexact flow ratio control. In order to avoid this poor performance. the paper presents a designing of the two controller modes for the flow ratio plants. This proposed controller combine the lookup table technique and the well-known PID controller to obtain the fast response and low overshoot of flow ratio control. The PID controller mode will be operated when the flow ratio reaches the preset value while the lookup table technique mode is applied for initial operation. The data in tile table is calculated by the valve sizing equation and convened to the valve position control signal. The experimental results show that the transient and steady state responses of the control systems using the proposed technique can be efficiently obtained when compared with tile conventional controller.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.2
• /
• pp.231-239
• /
• 1998

In this paper, we designed a current controlling servo system for speed control of a PMSM. In existing auto-tuning methods for PI controller parameters, the output response is delayed and the overshoot is generated. By solving these existing problems in this paper, a new PI auto-tuning method is applied to the speed controller for fast-response and reduced overshoot. PMSM servo systems offer a great advantage in unmanned factories where a great number of servo motors are employed, because of its easy maintenance characteristics and controllability. The implemented servo system is composed of absolute position detecting circuits of a rotor, a new auto-tuning PI control algorithm, a speed controller by using DSP, and power driving section. The proposed servo system is verified for it's practical availability by considering experimental results.

• Journal of IKEEE
• /
• v.3 no.1 s.4
• /
• pp.109-117
• /
• 1999

This paper describes the quick and precise control of the wafer temperature essential in rapid thermal processing(RTP). The bang-bang plus PID controller structure is introduced to satisfy rapid ramp-up rate and reduce overshoot and steady state error. The controller employs the PID action when the magnitude of the error between reference signal and the output temperature signal is smaller than some prescribed value. To find PID gains, the plant(autoregressive) model is first identified and Kappa-Tau tuning rule is used. The developed controller is applied to experimental RTP apparatus, and performances are evaluated.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.2
• /
• pp.104-110
• /
• 1984

An electro-hydraulic copying system is developed and its performance is experimentally investigated. As compared with a mechanical hydraulic coping system, this system has a basic difference in that; (1) the stylus movement is converted into an electrical signal via a position transducer. (2)the actuator displacement is also measured by a position sensing element, which serves as a feedback signal. Since the system parameters affect the control performance, the response characteristics such as percentage overshoot, rise time, settling time and steady state error are experimentally obtained under variation of these variables. The system parameter include supply pressure, servo amplifier gain and feedback gain. The experimental result shows that the cutting tool follows a stylus input motion to a desirable accuracy. The implication of this result indicates that the developed system can enhance the copying accuracy of the conventionally used mechanical type of hydraulic copying system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.1 no.2
• /
• pp.153-159
• /
• 2000

The cable installed will have catenary's type that is nonlinear and variable time system. Because it has a close relation to the catenary's type to determine command value of tension for the tension control of this cable, we need to study it. The purpose of this study is automated the installation equipment (or a catenary's cable. This study shows control system that the tension of a catenary's cable is keep constant. 'rho control method is adopted the fuzzy control that is robust because the model of a control object is nonlinear and variable time system and feed-forward control to suppress overshoot as a shift begins to move. On the basis of the dynamic modeling of a catenary's cable we compose the control system with adopting fuzzy and feed-forward control has recognized the effectiveness in simulation results.