• 센서학회지
• /
• 제22권4호
• /
• pp.268-275
• /
• 2013

Efficient energy management becomes a critical design issue for complex WSN (Wireless Sensor Network). Most of complex WSN employ the sleep mode to reduce the energy dissipation. However, it should cause the reduction of sensing coverage. This paper presents new wake-up algorithm for reducing energy consumption in complex WSN. The proposed wake-up algorithm is devised using geometric probability. It determined which node will be waked-up among the nodes having overlapped sensing coverage. The only one sensor node will be waked-up and it is ready to sense the event occurred uniformly. The simulation results show that the lifetime is increased by 15% and the sensing coverage is increased by 20% compared to the other scheduling methods. Consequently, the proposed wake-up algorithm can eliminate the power dissipation in the overlapped sensing coverage. Thus, it can be applicable for the various WSN suffering from the limited power supply.

• 대한원격탐사학회지
• /
• 제26권4호
• /
• pp.373-385
• /
• 2010

두 대의 레이더를 이용하여 반사도를 합성할 때 중복영역을 처리하는 새로운 합성 방법을 개발하였다. 이 합성 방법은 인접한 두 레이더의 중복되는 영역의 반사도 차이를 보정한 후 가중치를 주어 합성하는 방법이다. 가중치는 CAPPI(Constant Altitude PPI) 고도와 반사도가 관측된 고도와의 차이의 비를 역으로 계산한 것이다. 이 합성방법의 결과를 분석하기 위하여 두 레이더를 이용하여 관측한 태풍 사례의 반사도장에 대해 다른 합성방법(최댓값, 평균값, 근거리, 거리 가중)과 비교하였다. 두 레이더의 중복영역의 경계지점들에 대해 반사도의 연속성과 치우침을 분석하였고 그 결과 새로운 방법이 다른 합성방법에 비해 더 우수한 결과를 얻었다.

• 한국의류학회지
• /
• 제42권6호
• /
• pp.1056-1068
• /
• 2018

This study investigates whether women's wear brands' sizing systems reflect the body size and shape of their target age customers. This study classified 17 women's wear brands into three target age groups (20-30s, 30-40s, and 40-50s) and surveyed their body sizing systems for jacket items. The distribution of bust circumference and hip circumference of brands' sizing systems were compared with the size distribution of women in the 7th SizeKorea data. The brands targeting 20-30s fully produced five sizes which are the highest coverage rate, but the brands targeting 30-40s produced three sizes, and the brands targeting 40-50s produced one size. Regarding the body types, 60.0% of 20-30s target brands and 42.9% of 30-40s target brands reflected N type which is the average body type of each age group. However, the rest of the brands, including all 40-50s target brands, reflected A type which covered small portions of women. For each age group, 6 sizes with 24.0-29.0% coverage rates were proposed. With regard to the 88-94 size, three age groups overlapped: the 82-91 size was overlapped between the 20-30s and the 30-40s groups along with the 85-91 and 88-91 sizes that overlapped between the 30-40s and 40-50s groups.

• 한국통신학회논문지
• /
• 제39A권11호
• /
• pp.682-689
• /
• 2014

모바일 데이터 트래픽(data traffic)의 증가로 인해 스몰셀(Small Cell) 가용을 이용한 여러 기술들이 해결책으로 제시되고 있다. 하지만 이러한 기술은 백홀(backhaul) 용량의 증가가 필수적이고 이가 충족되지 않을 경우 성능한계가 기인한다. 이를 바탕으로 기지국 내 헬퍼(helper)라는 백홀 용량이 없거나 작은 대신 저장 매체 용량을 지닌 스몰셀을 이용해 백홀 용량을 저장 매체 용량으로 대체하여 사용자의 데이터 다운로드 지연값을 줄이는 펨토-캐싱(Femto-Caching)이 제시되었다. 본 논문은 사용자 위치 분포를 이용하는 실제적인 시나리오에서 각 헬퍼에 파일 분배 전략 방법을 제시함으로써 기존 연구를 확장하였다. 시뮬레이션을 통해 헬퍼간 커버리지(Coverage)가 겹치는 상황과 헬퍼의 커버리지가 증가하는 상황에 대해 사용자의 데이터를 헬퍼로부터 받을 수 있는 기회가 증가함을 통해 성능을 검증하였다.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.43-49
• /
• 2011

A distance relay scheme is commonly used for backup protection. This scheme, called a step distance protection, is comprised of 3 steps for graded zones having different operating time. As for the conventional step distance protection scheme, Zone 2 can exceed the ordinary coverage excessively in case of a transformer protection relay especially. In this case, there can be overlapped protection area from a backup protection relay and, therefore, malfunctions can occur when any fault occurs in the overlapped protection area. Distance relays and overcurrent relays are used for backup protection generally, and both relays have normally this problem, the maloperation, caused by a fault in the overlapped protection area. Corresponding to an IEEE standard, this problem can be solved with the modification of the operating time. On the other hand, in Korea, zones are modified to cope with this problem in some specific conditions. These two methods may not be obvious to handle this problem correctly because these methods, modifying the common rules, can cause another coordination problem. To overcome this problem clearly, this paper describes an improved backup protection coordination scheme using an IEC 61850-based distance relay for transformer backup protection. IEC 61850-based IED(Intelligent Electronic Device) and the network system based on the kernel 2.6 LINUX are realized to verify the proposed method. And laboratory tests to estimate the communication time show that the proposed coordination method is reliable enough for the improved backup protection scheme.

• 한국정보통신학회논문지
• /
• 제22권1호
• /
• pp.183-189
• /
• 2018

본 논문은 제한된 백홀 용량으로 발생하는 소형셀 네트워크에서의 트래픽 병목현상을 완화하기 위한 분산 파일저장 기술과 커버리지 확장 기술을 제안하였다. 제안 기법은 한정된 메모리 용량으로 백홀 망의 부하를 최소화하기 위해 파일의 인기도와 기지국의 메모리 용량에 따라 기지국의 커버리지와 파일 저장방법을 결정한다. 즉, 메모리 공간이 작거나 이용자들로부터 요청되는 파일이 다양할 경우 개별 기지국에 저장된 파일로 이용자를 서비스할 수 있는 확률이 낮아지므로 커버리지를 확장하고 기지국 사이 저장 파일의 중복을 줄여 커버리지 중첩지역에 있는 이용자가 다수의 기지국에 저장된 다양한 파일로 서비스 받을 수 있게 한다. 시뮬레이션을 통한 기존 배타적인 커버리지를 갖는 소형셀 네트워크에서의 파일저장 기법과의 전송용량 비교를 통해 제안 기법이 메모리 공간이 작거나 이용자들로 부터 요청되는 파일이 다양한 상황에서 높은 성능 이득을 가짐을 보였다.

• 전자공학회논문지CI
• /
• 제44권1호
• /
• pp.10-18
• /
• 2007

본 논문에서는, 가변의 감지 반경을 갖는 무선 센서 네트워크에서 감지범위가 중첩되는 영역을 최소화하기 위한 노드의 위치를 결정하는 방법에 관하여 기술하였다. 최적의 노드위치를 구하기 위하여, 이웃하는 노드들과의 감지영역이 중첩되는 면적과 각 노드의 감지 반경 및 이웃하는 노드와의 전개 각도를 이용하여 최적화 식을 유도하였다. 이를 기반으로 한 새로운 가변감지영역제어 (ASRC: Adjustable Sensing Ranges Control)에 의한 노드 위치방법을 제안하였다. 제안된 방법은 기존의 조건에 의한 방법과는 달리 수학적 식에 근거하여 유도된 모델로서, 다양한 시뮬레이션을 통하여 타당성을 확인하였다.

• 전기학회논문지
• /
• 제61권10호
• /
• pp.1542-1547
• /
• 2012

Asynchronous phenomenon occurs on the synchronous generators under power system when a generator's amplitude of electromagnetic force, phase angle, frequency and waveform etc become different from those of other synchronous generators which can follow instantly varying speed of turbine. Because the amplitude of electromagnetic force, phase frequency and waveform differ from those of other generators with which are to be put into parallel operation due to the change of excitation condition for load sharing and the sharing load change, if reactive current in the internal circuit circulates among generators, the efficiency varies and the stator winding of generators are overheated by resistance loss. When calculation method of protection settings and logic for protection of generator asynchronization will be recommended, a distance relay scheme is commonly used for backup protection. This scheme, called a step distance protection, is comprised of 3 steps for graded zones having different operating time. As for the conventional step distance protection scheme, zone 2 can exceed the ordinary coverage excessively in case of a transformer protection relay especially. In this case, there can be overlapped protection area from a backup protection relay and, therefore, malfunctions can occur when any fault occurs in the overlapped protection area. Distance relays and overcurrent relays are used for backup protection generally, and both relays have normally this problem, the maloperation, caused by a fault in the overlapped protection area. Corresponding to an IEEE standard, this problem can be solved with the modification of the operating time. On the other hand, in Korea, zones are modified to cope with this problem in some specific conditions. These two methods may not be obvious to handle this problem correctly because these methods, modifying the common rules, can cause another coordination problem. To overcome asynchronizing protection, this paper describes an improved backup protection coordination scheme using a new logic that will be suggested.

• 전기학회논문지
• /
• 제60권11호
• /
• pp.2000-2006
• /
• 2011

Asynchronous phenomenon occurs on the synchronous generators under power system when a generator's amplitude of electromagnetic force, phase angle, frequency and waveform etc become different from those of other synchronous generators which can follow instantly varying speed of turbine. Because the amplitude of electromagnetic force, phase frequency and waveform differ from those of other generators with which are to be put into parallel operation due to the change of excitation condition for load sharing and the sharing load change, if reactive current in the internal circuit circulates among generators, the efficiency varies and the stator winding of generators are overheated by resistance loss. Where calculation method of protection settings and Logic for Protection of Generator Asynchronization will be recommended, A distance relay scheme is commonly used for backup protection. This scheme, called a step distance protection, is comprised of 3 steps for graded zones having different operating time. As for the conventional step distance protection scheme, Zone 2 can exceed the ordinary coverage excessively in case of a transformer protection relay especially. In this case, there can be overlapped protection area from a backup protection relay and, therefore, malfunctions can occur when any fault occurs in the overlapped protection area. Distance relays and overcurrent relays are used for backup protection generally, and both relays have normally this problem, the maloperation, caused by a fault in the overlapped protection area. Corresponding to an IEEE standard, this problem can be solved with the modification of the operating time. On the other hand, in Korea, zones are modified to cope with this problem in some specific conditions. These two methods may not be obvious to handle this problem correctly because these methods, modifying the common rules, can cause another coordination problem. To overcome asynchronizing protection this paper describes an improved backup protection coordination scheme using a new Logic that will be suggested.

• Bulletin of the Korean Chemical Society
• /
• 제23권3호
• /
• pp.395-399
• /
• 2002

The voltammetric behavior of spontaneously adsorbing Mo layers on Pt(111) and Pt(100) electrodes has been studied to estimate the number of electrons involved in the electrochemical processes of spontaneously adsorbed Mo and the number of the bloc ked Pt sites for hydrogen adsorption. On Pt(111) and Pt(100) surfaces, the spontaneously adsorbed Mo layers showed redox peaks at 0.10 V and 0.15 V, respectively, and continuous current-potential waves in the conventional hydrogen region. Since the potential range of the Mo redox processes on both surfaces overlapped partially with the potential range of hydrogen adsorption, the variation in the ratio of the total charge of Mo and H ($Q_H$ +$Q_{MO}$) to the hydrogen charge of clean Pt electrode ($Q_H^0$) was analyzed. From the analysis, six electrons were estimated to be involved in the electrochemical processes of the spontaneously adsorbed Mo, and four Pt sites for hydrogen adsorption were calculated to be blocked by one adsorbed Mo atom. Based on these figures and the pH dependence of the Mo redox processes, we have proposed an electrochemical equation for the spontaneously adsorbed Mo. This electrochemical equation led us to conclude that the saturation coverage of the spontaneously adsorbed Mo is 0.25. The coverage of Mo less than 0.25, however, could not be determined voltammetrically due to the convolution of the charges of Mo and H.