In keeping with the needs of the times for energy and labor saving and simplifying production processes, interests has been growing in warm forging. Moreover, it is interested in increasing the material usage and production amounts. To improve the productivity and material usage, it is studied the process design of warm forging for socket. Until now, socket is manufactured by hot forging in hammer. The percentage of material usage is under $60\%$ in hammer forging. On the other han4 the percentage can be increased over $90\%$ in warm forging. To change the process from hot forging to warm forging, process designs must be performed. In this time, by using the FEM package, DEFORM-3D, we could get the shape of 1st process and minimum sealing pressure. They are very essential design data to decrease the trial and error. Practically, the overlap defect could be detected and eliminated with design modification of rib height and fillet radius. Moreover, forging load and minimum sealing pressure was defined by the 3D FEM analysis.
Generally, wear plate is steel plate having improved surface contact strength and impact strength by surface hardening which is welded using materials with good corrosion resistance, wear resistance and thermal resistance property. CFP GMAW(Compound Filler Plate Gas Metal Arc Welding) is the cladding method using GMAW with the CFP, which is bound with waterglass, on the substrate. It has advantages of reducing compound powder loss, uniform penetration, and preventing hardness decrease. To develope mass production technique of CFP GMAW process for production of high quality wear plate, the method for controling shallow penetration and increasing productivity is required. In this study, twin torch method applied to CFP GMAW process for increasing productivity. And the method was developed by controling penetration control, CFP dry time, gas formation flux and water glass concentration. As a result, applying twin torch method to CFP GMAW process was possible and high quality wide bead could be made without overlap joint.
New methods for joining sheet of metal are being sought. One of the most promising methods is MPJ (mechanical press joining). It has been used in thin metal work because of its simple process and relative advantages over other methods, as it requires no fasteners such as bolts or rivets, consumes less energy than welding, and produces less ecological problems than adhesive methods. In this study, the joining process and static behavior of single overlap joints has been investigated. During fixed die type joining process for SPCC plates, the optimal applied punching force was found. The maximum tensile-shear strength of the specimen produced at the optimal punching force was 1.75 kN. The FEM analysis result on the tensile-shear specimen showed the maximum von-Mises stress of 373 MPa under the applied load of 1.7 kN, which is very close to the maximum tensile strength of the SPCC sheet(= 382 MPa). This suggests that the FEM analysis is capable of predicting the maximum tensile load of the joint.
수컷, 12년령, 2 kg의 푸들견이 오른쪽 앞다리 파행 평가를 위해 내원하였다. 병력 검사에서 교통사고 후 1년 동안 재발성 양측 어깨 관절 탈구를 보이다가 최근 들어 왼쪽 어깨는 유지가 잘 되고 오른쪽 어깨는 탈구가 심해진 것을 확인 하였다. 신체 검사에서 오른쪽 앞다리 파행을 확인 하였고, 방사선 검사에서 상완골 내측 탈구와 상완골과 견갑골의 겹침 현상을 확인 하였다. 수술 중 근위축, 상완 두갈래 근육 톤 감소, 어깨 관절 내측 인대 파열, 어깨 아래근 정지부 파열을 확인 하였다. 상완 두갈래근 변위술을 사용하였으나 수술 7일 후 재탈구를 확인 하였다. 견갑골 어깨 관절 부위에 장착한 두 개의 $2mm{\times}6mm$ 피질용 본 앵커와 상완골 어깨 관절 부위에 장착한 한 개의 $4mm{\times}6mm$ 해면질용 본 앵커를 이용 어깨 관절 내측 인대 복원술을 실시 하였다. 수술 직후 및 6주 후 방사선 검사에서 어깨 관절 탈구를 확인 할 수 없었다. 수술 후 6개월 신체 검사에서 파행은 더 이상 관찰 되지 않았다.
Background: The blind sacroiliac joint (SIJ) block cannot always be performed accurately; it is commonly performed in the office based setting because intraarticular and periarticular injections are effective for SIJ pain. However, knowledge on the surface anatomy of the SIJ is lacking. The purpose of this study was to analyze the surface anatomical location of the posterior-inferior margin of the SIJ. Methods: After informed consent was obtained, fifty patients undergoing SIJ block in the prone position were examined. The oblique angles where the anterior-inferior margin and the posterior-inferior margin of the SIJ overlap on X-ray were evaluated. In addition, the surface anatomical relationships between the posterior-inferior margin of the SIJ on X-ray and the posterior superior iliac spine (PSIS) and sacral hiatus by palpation were assessed. Results: The oblique angle was $5.4{\pm}2.9^{\circ}$. The vertical and transverse distance between the posterior-inferior margin of the SIJ and PSIS were $3.8{\pm}0.8cm$ and $0.9{\pm}0.6cm$, respectively. The vertical and transverse distance between the posterior-inferior margin of the SIJ and the midpoint of the sacral hiatus were $3.4{\pm}0.7cm$ and $3.9{\pm}0.6cm$, respectively. Only the vertical distance between the posterior-inferior margin of the SIJ and PSIS showed significant difference between the male and the female groups (P = 0.0016). Conclusions: The measurements in this study can be used as a reference standards for the blind SIJ block.
Purpose: The purpose of this study is to compare the radiologic and clinical results of syndesmotic screw fixation and posterior malleolar fixation for syndesmotic injury in Lauge-Hansen classification pronation-external rotation (PER) stage IV ankle fractures with posterior malleolus fracture. Materials and Methods: We designed a retrospective study that included patients with Lauge-Hansen classification PER stage IV ankle fracture with posterior malleolus fracture. Of 723 patients who underwent ankle fracture surgery from March 2005 to November 2012, 29 were included in this study. In this study, syndesmotic injury was treated with syndesmotic screw fixation or posterior malleolus fixation. There were 15 cases of syndesmotic screw fixation and 14 cases of posterior malleolar fixation. We compared the radiologic and clinical results at one year postoperatively. Posterior malleolus fragment size on a pre-operative computed tomographic image, and tibiofibular overlap, medial clear space, articular step-off, Kellgren-Lawrence grade, and Takakura classification on a postoperative one year followup radiograph were used for comparison of the radiologic results. The clinical results were assessed using the American Orthopaedic Foot and Ankle Society score, visual analogue scale score, and patient subjective satisfaction score. Results: Posterior malleolar fragment size was $12.62%{\pm}3.01%$ of the joint space in the syndesmotic screw fixation group and $27.04%{\pm}4.34%$ in the posterior malleolar fixation group. A statistical difference was observed between the two groups. However, other results, including tibiofibular overlap, medial clear space, articular step-off, Kellgren-Lawrence grade, Takakura classification, and clinical scores showed no statistical difference. Conclusion: In the Lauge-Hansen classification PER stage IV ankle fracture with posterior malleolus fracture, if the posterior malleolus fracture can be reduced anatomically and fixated rigidly, syndesmotic screw fixation, which can cause several complications, is usually not required for achievement of a satisfactory syndesmotic stability; this would be a recommendable option for treatment of syndesmotic injury.
구치부 지지 상실과 같은 치아 결손은 불안정한 교합 관계를 야기하고 중심위나 습관적 폐구위에서 하악의 전방 활주 시 전치부에 과도한 하중을 초래하기 쉬워 교합평면이 붕괴되며 교합수직고경의 감소와 악관절 기능 장애까지 나타날 수 있다. 치열궁 크기의 부조화는 전치부와 구치부에서 수직수평적인 관계의 부조화를 유발하며 이로써 나타나는 전치부의 과개교합과 구치부의 가위교합은 불안정한 교합접촉과 충분하지 못한 교합접촉면적을 야기한다. 본 증례는 이와 같은 문제들이 복합적으로 나타나는 환자로 임시보철물을 이용하여 교합수직고경 증가 및 새롭게 설정한 교합평면에 대한 적응을 평가하였고, 교차 모형부착을 이용하여 최종보철물에 반영하여 수복하였다. 그 결과 안정적인 교합과 조화로운 수직수평피개 및 교합평면을 형성하여 기능적, 심미적으로 만족스러운 결과를 얻어 이를 보고하고자 한다.
Satellite cameras are calibrated before launch in detail and in general, but it cannot be guaranteed that the geometry is not changing during launch and caused by thermal influence of the sun in the orbit. Modem satellite imaging systems are based on CCD-line sensors. Because of the required high sampling rate the length of used CCD-lines is limited. For reaching a sufficient swath width, some CCD-lines are combined to a longer virtual CCD-line. The images generated by the individual CCD-lines do overlap slightly and so they can be shifted in x- and y-direction in relation to a chosen reference image just based on tie points. For the alignment and difference in scale, control points are required. The resulting virtual image has only negligible errors in areas with very large difference in height caused by the difference in the location of the projection centers. Color images can be related to the joint panchromatic scenes just based on tie points. Pan-sharpened images may show only small color shifts in very mountainous areas and for moving objects. The direct sensor orientation has to be calibrated based on control points. Discrepancies in horizontal shift can only be separated from attitude discrepancies with a good three-dimensional control point distribution. For such a calibration a program based on geometric reconstruction of the sensor orientation is required. The approximations by 3D-affine transformation or direct linear transformation (DL n cannot be used. These methods do have also disadvantages for standard sensor orientation. The image orientation by geometric reconstruction can be improved by self calibration with additional parameters for the analysis and compensation of remaining systematic effects for example caused by a not linear CCD-line. The determined sensor geometry can be used for the generation? of rational polynomial coefficients, describing the sensor geometry by relations of polynomials of the ground coordinates X, Y and Z.
KSII Transactions on Internet and Information Systems (TIIS)
/
제8권4호
/
pp.1406-1423
/
2014
Multi-mode device which combines multiple access technologies into a device will offer more cost-effective solution than a sole access implementation. Its concurrent multipath transfer (CMT) technology can transmit media flows over multiple end-to-end paths simultaneously, which is essential to select at least two paths from all available paths. At real networks, different paths are likely to overlap each other and even share bottleneck, which can weaken the path diversity gained through CMT. Spurred by this observation, it is necessary to select multiple independent paths as much as possible to avoid underlying shared bottleneck between topologically joint paths. Recent research in this context has shown that different paths with shared bottleneck can weaken the path diversity gained through CMT. In our earlier work, a grouping-based multipath selection (GMS) mechanism is introduced and developed. However, how to estimating the selection is still to be resolved. In this paper, we firstly introduce a Selection Correctness Index (SCI) to evaluate the correctness of selection results in actual CMT experiment. Therefore, this metric is helpful to discuss and validate the accuracy of the output paths. From extensive experiments with a realized prototype, the proposed scheme provides better evaluation tool and criterion in various network conditions.
벽지는 본래 종이가 지닌 성질상 실내장식에 있어서 수명이 가장 짧다는 특징이 있지만, 벽면의 시각적인 효과의 다양함으로 현대 벽장식 마감재중 가장 중요한 요소가 되었다 벽지는 종이의 특성상 역사적 유물 보존이 어렵고 그에 관한 기록이 미흡하며 건축물의 실내공간이 잘 유지되었거나, 광고로 사용되었던 다양한 상업용 샘플과 여러 책자에 의해서만 고증되고 있다. 종이벽지와 도배 자료들을 근거로 18세기의 영국을 중심으로 현대 벽지도배의 발전과 벽지산업의 이론적 체계 확립을 위해 과거의 전통적 벽지도배의 역사적 배경연구와 기술적, 상업적 배경의 근원을 이론적으로 고찰하여 전통적 벽지도배의 상업적 역사성을 재 인식하고자한다. 벽지도배의 이론적 연구를 통해 전통적 도배방법과 초배지의 전승, 반복이음 방식을 이용한 패턴의 양식화, 벽지도배의 분업화와 상업적 비용의 세분화, 과거 전통접착 방법의 전승, 띠벽지의 유래, 전통적 종이벽지의 실용성과 초기 도배기술의 다양한 기능성, 맞대이음 방식에서 중복이음 방식의 변화, 여성의 벽지선택을 통한 DIY제품의 개발 등을 이론적으로 고찰하였다. 벽지는 지금도 장식적, 기능적 벽 마감재 또는 벽 처리를 위한 가장 대중적인 재료로서 다른 재료들보다도 가장 선호하는 제품으로 남아 있다. 이러한 벽지의 도배 기술과 상업성을 역사적으로 고찰하여 전통 벽지도배의 이론적 체계 확립을 위한 중요한 자료이며 미래 벽지산업의 방법론적 접근을 위한 벽지역사의 근원이 될 수 있는 연구라고 사료된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.