• Nano
• /
• v.13 no.11
• /
• pp.1850126.1-1850126.10
• /
• 2018

Flexible strain sensors, as the core member of the family of smart electronic devices, along with reasonable sensing range and sensitivity plus low cost, have rose a huge consumer market and also immense interests in fundamental studies and technological applications, especially in the field of biomimetic robots movement detection and human health condition monitoring. In this paper, we propose a new flexible strain sensor based on thick CVD graphene film and its low-cost fabrication strategy by using the commercial adhesive tape as flexible substrate. The tensile tests in a strain range of ~30% were implemented, and a gage factor of 30 was achieved under high strain condition. The optical microscopic observation with different strains showed the evolution of cracks in graphene film. Together with commonly used platelet overlap theory and percolation network theory for sensor resistance modeling, we established an overlap destructive resistance model to analyze the sensing mechanism of our devices, which fitted the experimental data very well. The finding of difference of fitting parameters in small and large strain ranges revealed the multiple stage feature of graphene crack evolution. The resistance fallback phenomenon due to the viscoelasticity of flexible substrate was analyzed. Our flexible strain sensor with low cost and simple fabrication process exhibits great potential for commercial applications.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.3
• /
• pp.417-423
• /
• 2011

Generally, in order to avoid overlap with previous research and to initiate the innovative research, researchers must analyze patent information before research can begin. In this paper, the development of grading criteria using current trends in the wind power generation will be performed by analyzing the following criteria: technology position of major countries, impact factor each countries, patent family size, patent portfolios analysis, patent applied analysis, and analysis of nationality for a patent. This patent information for the wind power generation is expected to be useful in deciding the direction of future research.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.1
• /
• pp.1-5
• /
• 2019

In this paper, the experimental study and finite elements analysis were conducted on homogeneous and dissimilar metals single lap-shear bonded joints to investigate the factor that affect the joint failure load. It was found that factors which have the significant effects on the failure load of the joint was stiffness of the adherends. And from experimental results, it can be confirmed that the failure load increases linearly with overlap length increases. And the failure load of dissimilar metal joints is approximately 1KN(10~17%) larger than homogeneous metal joints. In order to confirm this phenomenon, the stress distribution and strain distribution of the specimens were analyzed through the finite element analysis. The difference between homogeneous metals joints and dissimilar metals joints is that stress and strain in adhesive are concentrated at the end of the overlap zone close to aluminium which has lower rigidity than aluminium in case of dissimilar metals joints. From high rigidity of steel, the stress concentration in bonds are decreased and it cause increase of the failure strength at dissimilar metal joints.

• Journal of Wetlands Research
• /
• v.25 no.2
• /
• pp.159-165
• /
• 2023

This study measured the ecological niche overlap between two deciduous oak species(Quercus acutissmia and Q. dentata) according to the change in growth responses after treating with the moisture and nutrient contents of the soil at four gradients, and interpreted the degree of competition between the two oak species by ordination method. In the moisture environment gradient, the ecological niche overlap of the two species was high in the photosynthesis-related leaf organs and low in plant architecture such as shoot length. In addition, in case of competition between two oaks, Q. dentata was remarkably dominant in soil moisture gradient, but Q. acutissimia slightly was slightly advantageous over Q. dentata in the soil nutrient gradient. These results show that even in a similar taxonomical group growing in a similar habitat, the response to the organ system of the plant varies depending on the type of environment factor, resulting in different competitive differences among plants.

• Tribology and Lubricants
• /
• v.21 no.6
• /
• pp.289-295
• /
• 2005

Most machine element, such as gears and bearings, are operated in the mixed lubrication region. Contact between two asperities has an effect on machine life by increasing local pressure. To estimate fatigue life exactly, asperity contact should be considered as a factor of fatigue life because this happening produce friction, abrasion and make flash temperature. In this paper, asperity contact is considered as a result of film breakdown when lubricant pressure is not enough to separate two asperities. Contact pressure is calculated to asperity overlap region and added to lubricant pressure. For this model, numerical procedure is introduced and the result on surface roughness and velocity for wheel bearing is presented. Results of EHL analysis for wheel bearing show that asperity contact is occurred at the edge ofEHL conjunction where has a insufficient lubricant pressure to separate two surface.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2007.05a
• /
• pp.281-284
• /
• 2007

Today, in space design boundaries between spaces have become obscure and space images are changed and overlap each other. Moreover, with the digital technology creating more informational spaces with various interactions, the set up of intelligent space has been made possible in reality. As if to deny the law of physical limitation, interfaces are used as main concept in structuring and expressing the spaces. It appears once again when each section is an expressional factor of interfaces and when meanings are produced through the systemization. Here this study analyzes the hybrid action that appear in contemporary space design. At the very moment, interface emerged as an important concept, defining contemporary space design in a very different way and present interface as a new possibility in space.

• Current Optics and Photonics
• /
• v.2 no.1
• /
• pp.47-52
• /
• 2018

We systematically investigated the negative-refraction effect for both TE and TM polarizations in annular photonic crystals. Since two polarization waves are excited in different bands, they result in different refractive angles, and so polarization beam splitters can be made of annular photonic crystals. It was found that, in comparison to normal square-lattice air-hole photonic crystals, annular photonic crystals have a much wider common frequency band between TE-1 and TM-2, which is quite beneficial to finding the overlap between the negative-refraction regions belonging to TE-1 and TM-2 respectively. Further analyses of equifrequency surfaces and the electric-field distribution of annular photonic crystals with different parameters have not only demonstrated how the filling factor of annular cells affects the formation of the common negative-refraction region between TE-1 and TM-2, but also revealed some ways to improve the performance of a polarization beam splitter based on the negative-refraction effect in an annular photonic crystal.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.2
• /
• pp.40-51
• /
• 1998

Electron transport properties are investigated by Monte Carlo simulation in n-HgCdTe. The material is easily degenerated at low temperature or being slightly doped, and is characterized by small band gap and large nonparabolic factor. The degeneracy is incorporated in the Monte Carlo simulation by taking into account the electron-electron scattering and the pauli exclusion principle. In the conventional method, however, the electron-electron scattering rate was developed under the assumption of parabolic conduction band. A new formulation of the electron-electron scattering rate is develop considering the band nonparabolicity and overlap integral. The electron-electron scattering effects on the electron distribution,impact ionization coefficienty, electron temperature, drift velocity and electron energy are presented.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.4
• /
• pp.235-242
• /
• 2016

The emerging High-Efficiency Video Coding (HEVC) standard attempts to improve coding efficiency by a factor of two over H.264/Advanced Video Coding (AVC) at the expense of an increase in computational complexity. Mode decision with motion estimation (ME) is still one of the most time-consuming computations in HEVC, as it is with H.264/AVC. Thus, fast mode decisions are not only an important issue to be researched, but also an urgent one. Several schemes for fast mode decisions have been presented in reference software and in other studies. However, the conventional hierarchical mode decision can be useless when block-level parallelism is exploited. This paper proposes operation-level exploration that offers more chances for early termination. An early termination condition is checked between integer and fractional MEs and between the parts of one partition type. The fast decision points of the proposed algorithm do not overlap those in previous works. Thus, the proposed algorithms are easily used with other fast algorithms, and consequently, independent speed-up is possible.

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.181-183
• /
• 2007

Experimental analysis was carried out to understand the fatigue phenomena of different thickness stainless steel overlap joining structure by Nd:YAG laser welding. The fatigue life was obtained through fatigue tests with the various levels of applied load. The fatigue life is related with the parameters such as gap condition and penetration depth through experiment. As the results, tensile and fatigue strength were proportional in heat input level and bead width was identified the major factor for joining strength. Also the fatigue life were decreased depend on gap condition, it was more affected at the low load level.