• Journal of the Korean Society of Food Culture
• /
• v.37 no.3
• /
• pp.239-247
• /
• 2022

This study evaluated the sensory characteristics of sauerkraut prepared by adding 0.5, 1.0, 1.5, 2.0, and 2.5% (w/w) sea salt to cabbage. The quantitative descriptive analysis (QDA) and acceptance test of sauerkraut were determined for each salt concentration, and the principal component analysis (PCA) and partial least square regression (PLSR) analysis were performed to confirm the correlation between each factor. Results of the QDA determined 14 descriptive terms; furthermore, brightness and yellowness of appearance and the sour, salty, and bitter flavors differed significantly according to the salt concentration. Results from the PCA explained 22.56% PC1 and 65.34% PC2 of the total variation obtained. Sauerkraut prepared using 0.5, 1.0, and 1.5% sea salt had high brightness, moistness, sour odor, green odor, sour flavor, carbonation, hardness, chewiness, and crispness, whereas sauerkraut prepared with 2.0 and 2.5% sea salt had high yellowness, glossiness, salty flavor, sweet flavor, and bitter flavor. Hierarchical cluster analysis classified the products into two clusters: sauerkraut of 0.5, 1.0, and 1.5%, and sauerkraut of 2.0 and 2.5%. Results of PLSR determined that sauerkraut of 1.0 and 1.5% were the closest to texture, taste, and overall acceptance. We, therefore, conclude that sauerkrauts prepared using 1.0 and 1.5% sea salt have excellent characteristics in appearance, taste, and texture.

• Journal of the Korean Society of Food Culture
• /
• v.37 no.1
• /
• pp.61-72
• /
• 2022

This study investigated the minimum salt concentration required for achieving the optimal quality characteristics of sauerkrauts made by adding 0.5, 1.0, 1.5, 2.0, and 2.5% (w/w) of sea salt to cabbage according to the fermentation period. For evaluating the quality characteristics, we measured the microorganisms (lactic acid bacteria, yeast, and coliform group), pH, total acidity, salinity, chromaticity, and hardness every 24 hours. The lactic acid bacteria were identified and analyzed, and acceptance test was carried out on the 4^th day of fermentation. The results showed that the salinity of 0.5, 1.0, 1.5, and 2.0% sauerkrauts on the 4^th day of fermentation was lower than the average salinity of Baechu-Kimchi. The 0.5, 1.0, 1.5, and 2.0% sauerkrauts had significantly higher lactic acid bacteria than the 2.5% sample, and the coliform group was not detected after the 5^th day of fermentation. Among the microbes identified, Weissella cibaria JCM 12495 was found only in domestic sauerkraut, in addition to Lactococcus lactis NCDO 604, Leuconostoc citreum JCM 9698, and Lactobacillus sakei DSM 20017. The results of the acceptance test show that 1.0 and 1.5% sea salt sauerkraut had significantly higher overall acceptance compared to the other samples. In conclusion, sauerkraut with a salt concentration of 1.0 and 1.5% (w/w) had abundant lactic acid bacteria and excellent sensory properties, suggesting that the production of low-salted sauerkraut can be adopted to reduce consumer salt intake in the future.

• Asia pacific journal of information systems
• /
• v.18 no.4
• /
• pp.27-55
• /
• 2008

Due to the increasing and intensifying competition in the Internet shopping market, it has been recognized as very important to develop an effective policy and strategy for acquiring loyal customers. For this reason, web site designers need to know if a new Internet shopping mall(ISM) will be accepted. Researchers have been working on identifying factors for explaining and predicting user acceptance of an ISM. Some studies, however, revealed inconsistent findings on the antecedents of user acceptance of a website. Lack of consideration for individual differences in user ability is believed to be one of the key reasons for the mixed findings. The elaboration likelihood model (ELM) and several studies have suggested that individual differences in ability plays an moderating role on the relationship between the antecedents and user acceptance. Despite the critical role of user ability, little research has examined the role of user ability in the Internet shopping mall context. The purpose of this study is to develop a user acceptance model that consider the moderating role of user ability in the context of Internet shopping. This study was initiated to see the ability of the technology acceptance model(TAM) to explain the acceptance of a specific ISM. According to TAM. which is one of the most influential models for explaining user acceptance of IT, an intention to use IT is determined by usefulness and ease of use. Given that interaction between user and website takes place through web interface, the decisions to accept and continue using an ISM depend on these beliefs. However, TAM neglects to consider the fact that many users would not stick to an ISM until they trust it although they may think it useful and easy to use. The importance of trust for user acceptance of ISM has been raised by the relational views. The relational view emphasizes the trust-building process between the user and ISM, and user's trust on the website is a major determinant of user acceptance. The proposed model extends and integrates the TAM and relational views on user acceptance of ISM by incorporating usefulness, ease of use, and trust. User acceptance is defined as a user's intention to reuse a specific ISM. And user ability is introduced into the model as moderating variable. Here, the user ability is defined as a degree of experiences, knowledge and skills regarding Internet shopping sites. The research model proposes that the ease of use, usefulness and trust of ISM are key determinants of user acceptance. In addition, this paper hypothesizes that the effects of the antecedents(i.e., ease of use, usefulness, and trust) on user acceptance may differ among users. In particular, this paper proposes a moderating effect of a user's ability on the relationship between antecedents with user's intention to reuse. The research model with eleven hypotheses was derived and tested through a survey that involved 470 university students. For each research variable, this paper used measurement items recognized for reliability and widely used in previous research. We slightly modified some items proper to the research context. The reliability and validity of the research variables were tested using the Crobnach's alpha and internal consistency reliability (ICR) values, standard factor loadings of the confirmative factor analysis, and average variance extracted (AVE) values. A LISREL method was used to test the suitability of the research model and its relating six hypotheses. Key findings of the results are summarized in the following. First, TAM's two constructs, ease of use and usefulness directly affect user acceptance. In addition, ease of use indirectly influences user acceptance by affecting trust. This implies that users tend to trust a shopping site and visit repeatedly when they perceive a specific ISM easy to use. Accordingly, designing a shopping site that allows users to navigate with heuristic and minimal clicks for finding information and products within the site is important for improving the site's trust and acceptance. Usefulness, however, was not found to influence trust. Second, among the three belief constructs(ease of use, usefulness, and trust), trust was empirically supported as the most important determinants of user acceptance. This implies that users require trustworthiness from an Internet shopping site to be repeat visitors of an ISM. Providing a sense of safety and eliminating the anxiety of online shoppers in relation to privacy, security, delivery, and product returns are critically important conditions for acquiring repeat visitors. Hence, in addition to usefulness and ease of use as in TAM, trust should be a fundamental determinants of user acceptance in the context of internet shopping. Third, the user's ability on using an Internet shopping site played a moderating role. For users with low ability, ease of use was found to be a more important factors in deciding to reuse the shopping mall, whereas usefulness and trust had more effects on users with high ability. Applying the EML theory to these findings, we can suggest that experienced and knowledgeable ISM users tend to elaborate on such usefulness aspects as efficient and effective shopping performance and trust factors as ability, benevolence, integrity, and predictability of a shopping site before they become repeat visitors of the site. In contrast, novice users tend to rely on the low elaborating features, such as the perceived ease of use. The existence of moderating effects suggests the fact that different individuals evaluate an ISM from different perspectives. The expert users are more interested in the outcome of the visit(usefulness) and trustworthiness(trust) than those novice visitors. The latter evaluate the ISM in a more superficial manner focusing on the novelty of the site and on other instrumental beliefs(ease of use). This is consistent with the insights proposed by the Heuristic-Systematic model. According to the Heuristic-Systematic model. a users act on the principle of minimum effort. Thus, the user considers an ISM heuristically, focusing on those aspects that are easy to process and evaluate(ease of use). When the user has sufficient experience and skills, the user will change to systematic processing, where they will evaluate more complex aspects of the site(its usefulness and trustworthiness). This implies that an ISM has to provide a minimum level of ease of use to make it possible for a user to evaluate its usefulness and trustworthiness. Ease of use is a necessary but not sufficient condition for the acceptance and use of an ISM. Overall, the empirical results generally support the proposed model and identify the moderating effect of the effects of user ability. More detailed interpretations and implications of the findings are discussed. The limitations of this study are also discussed to provide directions for future research.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.11
• /
• pp.1878-1885
• /
• 2013

The purposes of this study are to generate sensory profile, measure consumer acceptance, and determine liking and disliking factors of aseptic-packaged rice porridges (APRP). Five APRPs made by five different rice cultivars were used for this study. Twenty-one attributes were generated by trained panelists. Finally, 16 attributes were determined as descriptive terms for APRP. Each cultivar showed a different descriptive sensory profile. In a consumer acceptance test, there was no statistical difference (P>0.05) in the acceptances of the overall, appearance, taste, texture, viscosity, and rice particle texture among the 5 APRPs. SW52 showed the highest acceptance ratings in the overall, appearance, taste and texture, followed by SR. A total of 52% of consumers showed preference toward SW52 and SR. SW63 showed the lowest ratings and no consumer preference pattern. Consumers were divided into two groups by a cluster analysis; one was the consumers (C1) who liked APRP, and the other was the consumers (C2) who had a neutral stand in general. By correlating the results from descriptive analysis and consumer ratings from C1, liking and disliking factors for consumer acceptance were determined. The disliking factors were bitterness, feeling of surface, stickiness, metallic flavor, roasted aroma, and thickness. The liking factors were old cooked rice aroma/flavor. The disliking factors dominated in the determination of acceptability of APRP. Selecting rice cultivars that had low intensities of disliking factors is the key for APRP development.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.5
• /
• pp.2991-2999
• /
• 2013

Background: Introduction of the HPV vaccine is a forefront primary prevention method in reducing the incidence of carcinogenic human papillomavirus (HPV) and cervical cancer. The Malaysia government has implemented the National HPV immunisation programme since 2010, supplying HPV vaccine free to targeted 13 year olds. This study aimed to explore the level of knowledge among mothers on cervical cancer, HPV, HPV vaccine and National HPV (NHPV) immunisation programme since its' implementation. It also assessed acceptance of mothers towards HPV vaccine being administered to their daughter, son or themselves. Materials and Methods: A cross sectional study was conducted on 155 respondents using self-administered questionnaires; conducted in December 2012 at the Obstetrics and Gynaecology Clinic in a teaching hospital in Kuala Lumpur. Respondents were selected using a multistage sampling technique. Results: A response rate of 100% was obtained. Overall, 51.0% of mothers had good knowledge, with 55% having good knowledge of cervical cancer, 54.2% for both HPV and the National HPV immunisation programme and 51.0% for the HPV vaccine. Regression analyses showed that ethnicity was associated with knowledge on cervical cancer (p=0.003) while education was associated with knowledge on HPV (p=0.049). Three factors are associated with knowledge of the National HPV immunisation programme; ethnicity (p=0.017), mothers' education (p=0.0005) and number of children (p=0.020). The acceptance of HPV vaccine to be administered among daughter was the highest at 87.1%, followed by for mothers themselves at 73.5%, and the least is for sons 62.6%. Conclusions: This study found that the overall level of knowledge was moderate. Adequate information on cervical cancer, HPV, HPV vaccination and the National HPV immunisation programme should be provided to mothers in order to increase acceptance of the HPV vaccine which can reduce the disease burden in the future.

• Culinary science and hospitality research
• /
• v.20 no.1
• /
• pp.27-37
• /
• 2014

This study examines the quality characteristics of the muffins made by adding 3%, 6%, and 9% of beet powder, comparing with the reference group. The result showed that there has been no significant difference in the ash content from the groups added with 3% and 9% of beet powder. The height of muffins appeared to be 4.7~5.0 cm, which didn't show any significant difference among the samples. The volume of beet muffins has shown significant difference among the samples (p<0.001). From the measurement result by scanning electron microscope (SEM), the samples had thick cellular walls and coarse pores because there was less gluten content with increased beet powder. From the chromaticity measurement result, L value and b-value decreased, while a-value increased with increased beet powder. From the texture measurement result, hardness increased with increased beet powder. Adhesiveness appeared to be getting lower with increased beet powder. Also, there was significant difference among the samples for cohesiveness (p<0.001). Gumminess got higher in the samples added with 3% and 6% of beet powder, and the highest chewiness was shown in the sample group added with 3% of beet powder. From the sensory evaluation result, overall acceptance has appeared in order of 6% > 9% > 3% > 0%.

• Journal of the Korean Society of Food Culture
• /
• v.34 no.4
• /
• pp.440-448
• /
• 2019

In order to study low salinity Oiji (cucumber pickled in salt) with a reduced content of sodium, which was accomplished by replacing the salt in this saliferous food, we produced Oiji using sea tangle and, then performed physicochemical and sensory evaluations. It was found that the moisture content of Oiji was decreased with increasing the amount of added sea tangle. The pH and acidity were significantly different between the samples made with sea tangle, and the pH and acidity showed no consistent tendency according to the amount of sea tangle powder added. The salinity of Oiji was the highest in the control Oiji (2.92%), and the higher the amount of sea tangle added, the lower was the salinity in the Oiji with the salt replaced by sea tangle (2.78 to 2.89%). The sodium content of Oiji was also the highest in the control Oiji (591.65 mg/100 g) and significantly decreased with the increasing addition of sea tangle (560.43~366.71 mg/100 g). The color value of Oiji showed a significant difference between the samples, with no consistent tendency according to the amount of added sea tangle powder. The hardness of Oiji was significantly greater in the Oiji with the salt replaced by 40% of sea tangle, with greater hardness noted as the amount of added sea tangle powder increased (217.70 g). As a result of the acceptance test of Oiji, there were significant differences between the samples in overall acceptance, appearance, and taste, showing that the Oiji with salt replaced by 30% of sea tangle was significantly highest in overall acceptance and taste. The attribute difference test showed a significant difference only for the brown color, while no significant differences were found between the samples for off-flavor, bitter taste, fermented taste, salty taste, sour taste, hardness and crispness. The above results demonstrated that when sea tangle was substituted for 30 to 40% of the salt content, the Oiji with a low content of sodium and low salinity can be produced with a high level of taste and overall preference. Therefore, this study firmly demonstrated that 30 to 40% of the salt can be replaced by sea tangle as a substitute in order to produce Oiji that has low salinity, a low sodium content.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.6
• /
• pp.880-889
• /
• 2021

The home meal replacement (HMR) market has attracted significant attention due to COVID-19 pandemic and products that utilize the combination of different processed ingredients are now being developed. In this study, Broughton's ribbed ark Scapharca broughtonii was soaked in seasoned soy sauce with the incorporation of mustard leaf Brassica juncea (M-BRA), which is known to have a unique texture as well as excellent functional properties such as antioxidation, to develop a regional specialty product. The optimal conditions for manufacturing M-BRA from the seasoned soy sauce (the sauce to be added [X₁] and the soaking time [X₂]), were examined using response surface methodology (RSM) to analyze the significance of the salinity (Y₁), amino-N content (Y₂), and overall acceptance (Y₃). The coefficient of determination (R²) between X₁-X₂ and Y₁-Y₃ were close to 1, thereby confirming the suitability of the RSM model. The optimal conditions were seasoned soy sauce addition of 140% and soaking time of 156 min. The M-BRA manufactured under these conditions exhibited superior overall acceptance compared to seasoned commercial soy sauce, which was used as a control. We expect that the market for M-BRA manufactured by combining marine and agricultural materials will expand owing to superior overall acceptance compared with commercial products.

• The Research Journal of the Costume Culture
• /
• v.22 no.5
• /
• pp.728-742
• /
• 2014

This study aimed to investigates the effects of self-assertiveness and appearance satisfaction on psychological well-being (personal growth, purpose in life, self acceptance, environmental mastery, autonomy and interpersonal relations), and find out if there exists any causal relationship among each variable in the process. For data collection, a questionnaire was administrated from April 23 to May 13, 2012 in the city of Gwangju, Korea. The subjects were women in their twenties and thirties. 359 women responded to it. The results were as follows. First, overall self assertiveness had positive effects on appearance satisfaction which, in turn, turned out to have overall positive effects. Second, the overall effects of self assertiveness on psychological well-being turned out to have positive effects. Third, overall appearance satisfaction had positive effects on psychological well being. Forth, the effects that self assertiveness had on psychological well-being mediated appearance satisfaction and appeared to be partly insignificant. The implications and the direction of this research should be discussed in the future study so that it can improve personal psychological well-being by finding out other variables aside from self assertiveness, appearance satisfaction.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.624-628
• /
• 2000

The performance of machine tools is qualified by many test procedures given by the national/international standards or respected organisations. Among them, test regarding circular-interpolation accuracy is getting to be one of the important acceptance tests at the production level. Machine tool systems are composed of many mechanical and electronical sub-systems so that it is not easy to improve dynamic performance by examining only one particular part. Instead, overall systematic approach encompassing all the contributing elements is necessary to achieve good results. In this study, measures taken in circular accuracy improvements will be explained case by case.